Opens in a new tab

LT1764AEQ-1.8#TRPBF

3A LDO, 1.8V fixed, 40uVrms noise, 1.8V dropout, DD-Pak, low-noise RF supply

11369

Effective Inventory

Image for reference only

Manufacturer Part:

LT1764AEQ-1.8#TRPBF

Package:

DD-Pak / TO-263-5 (10.30 x 9.10 x 4.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LT1764AEQ-1.8#TRPBF from Analog Devices is a 3 A, low-noise LDO regulator with a fixed 1.8 V output in a 5-lead DD-Pak (TO-263) package. It features 40 µVrms output noise (10 Hz to 100 kHz), 1.8 V dropout at 3 A, and wide 2.7 V to 20 V input range, making it ideal for noise-sensitive RF and precision analog circuits.

Key Specifications

Output Voltage 1.8 V (fixed)
Output Current 3 A
Dropout Voltage 1.8 V max @ 3 A
Output Noise 40 µVrms (10 Hz to 100 kHz)
Input Voltage Range 2.7 V to 20 V
PSRR >60 dB at 1 kHz
Line Regulation 0.04%/V
Operating Temperature -40°C to +125°C
Package DD-Pak (TO-263-5)

Features

  • Ultra-low 40 µVrms output noise for RF and precision analog
  • 1.8 V maximum dropout at full 3 A load
  • Fixed 1.8 V output with 1% initial accuracy
  • External bypass capacitor reduces noise to below 10 µVrms
  • No protection diodes required for output voltages to 20 V
  • Shutdown pin with 0.5 µA standby current

Applications

  • RF and wireless power supplies
  • PLL and VCO clean supply rails
  • High-speed ADC/DAC reference supplies
  • Low-noise instrumentation amplifiers
  • Post-regulation for switching converters
Product Introduction: LT1764AEQ-1.8#TRPBF Product Introduction

The LT1764AEQ-1.8#TRPBF from Analog Devices is a 3 A low-dropout (LDO) linear regulator with a fixed 1.8 V output, specifically designed for ultra-low-noise applications. The device delivers only 40 µVrms output noise over the 10 Hz to 100 kHz bandwidth, making it ideal for powering RF power amplifiers, PLLs, VCOs, high-speed data converters, and other noise-sensitive circuits. The LDO architecture achieves a maximum dropout voltage of 1.8 V at the full 3 A load, allowing operation from supplies as low as 3.6 V. An optional external bypass capacitor on the NR/ADJ pin can reduce output noise to below 10 µVrms. The input range extends to 20 V, and no protection diodes are required even with output voltages up to 20 V. The shutdown pin reduces supply current to 0.5 µA, and the DD-Pak (TO-263-5) package provides excellent thermal dissipation for surface-mount assembly.

Working Principle: LT1764AEQ-1.8#TRPBF Working Principle

The LT1764AEQ-1.8 operates as a series-pass linear regulator using a PNP pass transistor in a low-dropout configuration. Unlike NPN-pass LDOs that require the input voltage to exceed the output by at least one VBE plus VCESAT (typically 1.5-2 V), the PNP pass transistor allows dropout as low as the VCESAT of the transistor (1.8 V at 3 A). The error amplifier compares a divided version of the output voltage against a precision internal bandgap reference and drives the PNP pass transistor to maintain regulation. The ultra-low noise is achieved through a carefully designed bandgap reference with a dedicated NR (noise reduction) pin. Connecting an external capacitor from NR to GND creates a low-pass filter that attenuates reference noise, reducing total output noise from 40 µVrms to below 10 µVrms. The high PSRR (>60 dB at 1 kHz) rejects input supply ripple, making the device effective as a post-regulator after switching converters.

Pin Description: LT1764AEQ-1.8#TRPBF Pin Definition and Functions
Pin Name Function
1 OUT Regulated 1.8 V output
2 GND Ground connection and thermal pad
3 EN/SHDN Enable / shutdown control (high = enabled, low = shutdown)
4 NR Noise reduction bypass capacitor connection (optional)
5 IN Input supply (2.7 V to 20 V)
Application Scenarios: In which products and applications is LT1764AEQ-1.8#TRPBF used
  • RF Power Amplifier Supply: Clean 1.8 V rail for cellular and Wi-Fi RF PA modules requiring ultra-low noise
  • PLL/VCO Power: Low-noise supply for phase-locked loops and voltage-controlled oscillators in frequency synthesizers
  • High-Speed ADC Reference: Precision 1.8 V reference supply for 14-16 bit data converters
  • Post-Regulation: Clean-up LDO after switching converter in mixed-signal systems
  • Instrumentation: Low-noise supply for precision op-amps and instrumentation amplifiers
Alternative Models: What chips are recommended as replacements for LT1764AEQ-1.8#TRPBF
Model Manufacturer VOUT IOUT Noise Package Notes
LT1764AEQ-2.5#TRPBF Analog Devices 2.5 V 3 A 40 µVrms DD-Pak 2.5 V fixed variant
LT1764AEQ-3.3#TRPBF Analog Devices 3.3 V 3 A 40 µVrms DD-Pak 3.3 V fixed variant
TPS7A7001DDCR Texas Instruments Adj 3 A 17 µVrms SON-8 Lower noise, adjustable
LT3045EDD#PBF Analog Devices Adj 0.5 A 0.8 µVrms DFN-10 Ultra-low noise, lower Iout
ADP1761ACPZ Analog Devices Adj 1 A 1.3 µVrms LFCSP-8 Ultra-low noise, LFCSP

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1