Opens in a new tab

LT1764EQ#TRPBF

3A LDO, 340mV dropout, 20uV RMS noise, adjustable, TSSOP-16

4567

Effective Inventory

Image for reference only

Manufacturer Part:

LT1764EQ#TRPBF

Package:

TSSOP-16 (5 x 4.4 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LT1764EQ#TRPBF from Analog Devices is a 3A low-dropout (LDO) regulator with fast transient response and low noise in TSSOP-16 package. With 340mV max dropout at 3A and 20uV RMS output noise, it provides clean power for noise-sensitive applications.

Key Specifications

Output Current 3 A
Dropout Voltage 340 mV max @ 3A
Output Noise 20 uV RMS (10Hz-100kHz)
Input Voltage Range 2.7 V to 20 V
Output Voltage Adjustable (1.21V reference)
Line Regulation 0.3 mV typical
Load Regulation 5 mV typical
Transient Response < 10us for 3A step
Package TSSOP-16 (E suffix)
Operating Temperature -40 to +125 C

Features

  • 3A output current with only 340mV dropout for efficient regulation
  • 20uV RMS output noise ideal for RF and precision analog circuits
  • Fast transient response under 10us for dynamic loads
  • Adjustable output from 1.21V using external resistor divider
  • Thermal shutdown and current limit protection
  • SHDN pin for logic-controlled power sequencing

Applications

  • RF power amplifier power supply
  • High-speed ADC/DAC reference supply
  • FPGA and DSP core power
  • Post-regulation for switching supplies
  • Medical imaging low-noise power
Product Introduction: LT1764EQ#TRPBF Product Introduction

The LT1764EQ#TRPBF from Analog Devices is a 3A low-dropout (LDO) regulator optimized for fast transient response and ultra-low output noise. With only 340mV maximum dropout voltage at 3A output current and 20uV RMS output noise over the 10Hz to 100kHz bandwidth, it provides exceptionally clean power for noise-sensitive RF and precision analog circuits. The output voltage is adjustable from 1.21V using an external resistor divider, and the input voltage range extends up to 20V. The device features fast transient response under 10us for a 3A load step, thermal shutdown and current limit protection, and a shutdown pin for logic-controlled power sequencing. The E suffix denotes TSSOP-16 package and TRPBF indicates tape and reel with lead-free finish.

Working Principle: LT1764EQ#TRPBF Working Principle

The LT1764EQ#TRPBF operates as a low-dropout linear regulator using a PNP pass transistor. (1) The error amplifier compares a fraction of the output voltage (from the external resistor divider) against the internal 1.21V reference, and drives the PNP pass transistor to maintain regulation. The PNP architecture allows the very low dropout voltage since the pass transistor saturation voltage can be as low as 340mV at 3A. (2) The ultra-low 20uV RMS output noise is achieved by an optimized internal reference design and by placing a noise reduction capacitor (CNR) from the REF/BYP pin to ground, which filters the reference noise bandwidth. (3) The fast transient response is achieved through a high-bandwidth error amplifier and a low-ESR output capacitor network. When the load current steps from 0 to 3A, the error amplifier rapidly adjusts the pass transistor gate drive, and the output capacitor supplies the transient current until the loop settles within 10us.

Pin Description: LT1764EQ#TRPBF Pin Definition and Functions
Pin Name Function
1 OUT Regulator output
2 SENSE Remote sense (adjustable version)
3-4 OUT Regulator output (multiple pins)
5 ADJ Adjust feedback input
6 GND Ground
7 SHDN Shutdown (active low)
8 REF/BYP Reference bypass (noise reduction)
9-12 IN Input supply (multiple pins)
13 IN Input supply
14-16 GND/OUT Ground/Output tabs
Application Scenarios: In which products and applications is LT1764EQ#TRPBF used
  • RF power amplifier power supply requiring ultra-low noise and fast transient response
  • High-speed ADC/DAC reference supply with 20uV RMS noise floor
  • FPGA and DSP core power with 3A dynamic current demand
  • Post-regulation after switching converter for noise-sensitive loads
  • Medical imaging system low-noise power supply
Alternative Models: What chips are recommended as replacements for LT1764EQ#TRPBF
Model Manufacturer Key Difference
LT1764EQ-3.3#TRPBF Analog Devices Fixed 3.3V output version
LT1764EQ-5#TRPBF Analog Devices Fixed 5V output version
LT1963AEQ#TRPBF Analog Devices 1.5A, lower noise, same family
TPS7A7001RGW TI 3A LDO, 6V input, QFN
LT3045EMSE Analog Devices 0.5A, 0.8uV RMS noise, ultralow

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1