Opens in a new tab

LT1963AES8

1.5A adjustable LDO, 1.21-20V out, 340mV dropout, 40µVRMS noise, SOIC-8

7300

Effective Inventory

Image for reference only

Manufacturer Part:

LT1963AES8

Package:

SOIC-8 (Narrow, 3.90mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LT1963AES8 from Analog Devices is a 1.5A low-noise low-dropout (LDO) linear regulator with adjustable output (1.21V~20V), 340mV dropout at 1.5A, and 40µVRMS output noise. Operating from 1.8V to 20V input, it features controlled quiescent current and fast transient response in a Narrow SOIC-8 package.

Key Specifications

  • Output Type: Adjustable (1.21V ~ 20V via external resistors)
  • Output Current: 1.5A
  • Input Voltage: 1.8V ~ 20V
  • Dropout Voltage: 340mV typical @ 1.5A
  • Output Noise: 40µVRMS (10Hz~100kHz, COUT=10µF)
  • Quiescent Current: 1mA (operating), <1µA (shutdown)
  • Reference Voltage: 1.21V (adjustable output feedback)
  • PSRR: >60dB at 100Hz
  • Current Limit: 1.9A typical
  • Line Regulation: 0.02%/V
  • Load Regulation: 0.02%
  • Operating Temperature: -40°C ~ 125°C
  • Package: SOIC-8 (Narrow, 3.90mm width)
  • Minimum Output Capacitor: 10µF

Features

  • Ultra-low 40µVRMS output noise
  • Fast transient response optimized
  • Controlled quiescent current does not rise in dropout
  • Shutdown mode draws <1µA
  • Reverse battery protection without external diode
  • Thermal shutdown and current limit
  • Stable with 10µF ceramic output capacitor
  • Adjustable output from 1.21V to 20V

Applications

  • Switching supply post-regulation
  • RF power supply noise filtering
  • High-speed digital circuit supply
  • Battery-powered low-noise instruments
  • Medical equipment power supplies
Product Introduction: LT1963AES8 Product Introduction

The LT1963AES8 from Analog Devices is a 1.5A adjustable low-dropout linear regulator featuring the same core architecture as the LT1764A family in a lower-current, smaller SOIC-8 package. The adjustable output is set by two external resistors dividing the output voltage down to the 1.21V feedback threshold. The 340mV dropout voltage at 1.5A enables efficient regulation from supplies just slightly above the output voltage. The 40µVRMS output noise makes it suitable for powering noise-sensitive RF and analog circuits. The ES8 suffix indicates the Narrow SOIC-8 package rated for the -40°C to 125°C temperature range. This device is ideal for applications needing 1.5A or less where the D2PAK package of the LT1764A is unnecessarily large.

Working Principle: LT1963AES8 Working Principle

The LT1963AES8 uses a PNP pass transistor in a common-emitter configuration, where the dropout voltage is defined by the VCE(sat) of the pass element. The error amplifier compares the feedback voltage (from the ADJ pin) with the internal 1.21V bandgap reference, driving the base of the PNP pass transistor to maintain the output voltage. The output voltage is programmed by a resistor divider from OUT to ADJ to GND: VOUT = 1.21V × (1 + R1/R2). A noise bypass capacitor on the ADJ pin (or the internal NR pin in fixed versions) filters the bandgap reference noise, achieving 40µVRMS output noise. The controlled quiescent current architecture ensures the 1mA operating current remains stable even when the input voltage drops below the regulation threshold. The SHDN pin disables the device, reducing current to <1µA.

Pin Description: LT1963AES8 Pin Definition and Functions
Pin Name Function
1 SHDN Shutdown control (high=on, low=shutdown)
2 IN Input supply (1.8V~20V)
3 GND Ground
4 GND Ground
5 ADJ Adjustment feedback pin (1.21V threshold)
6 GND Ground
7 GND Ground
8 OUT Regulated output (1.21V~20V)
Application Scenarios: In which products and applications is LT1963AES8 used

The LT1963AES8 is commonly used as a post-regulator after a switching converter in RF systems, where the 40µVRMS noise eliminates switching ripple from the supply. For adjustable power supplies, the external resistor divider allows any output from 1.21V to 20V. In battery-powered instruments, the <1µA shutdown current preserves battery life. The SOIC-8 package is well-suited for space-constrained PCB layouts where the D2PAK is too large. Multiple LT1963AES8 devices can provide different voltage rails from a common input supply.

Alternative Models: What chips are recommended as replacements for LT1963AES8
Model Manufacturer Key Difference
LT1963AMP-3.3 Analog Devices Fixed 3.3V version, MSOP-8 package
LT1764AEQ Analog Devices 3A version, D2PAK-5 package
LT1962EMS8 Analog Devices 500mA version, MSOP-8 package

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1