Opens in a new tab

LT4356IMS-3#TRPBF

3A surge stopper with current limit, 4-80V, MSOP-16

4042

Effective Inventory

Image for reference only

Manufacturer Part:

LT4356IMS-3#TRPBF

Package:

MSOP-16 (5.00 x 4.40 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

LT4356IMS-3#TRPBF Overview

The LT4356IMS-3#TRPBF is a high voltage surge stopper from Analog Devices, operating voltage 4V-80V, adjustable current limiting, external N-channel MOSFET gate drive, built-in UV/OV lockout and fault timer, in an MSOP-16 package.

Key Features

  • Operating voltage: 4V-80V
  • Adjustable current limiting
  • External N-channel MOSFET gate drive
  • UV/OV lockout
  • Fault timer
  • Supply current: 2mA
Product Introduction: LT4356IMS-3#TRPBF Product Introduction

The LT4356IMS-3#TRPBF is a surge stopper with fault latchoff from Analog Devices, operating from 4 V to 80 V input in a 10-lead MSOP package. It protects loads from high-voltage transients by controlling an external N-channel MOSFET gate, regulating the output during overvoltage events while allowing loads to continue functioning. The -3 variant latches off upon fault and requires a SHDN pin toggle to restart, providing maximum protection for sensitive equipment. It includes an auxiliary amplifier usable as a voltage comparator or linear regulator controller, and supports back-to-back MOSFETs for reverse input protection.

Working Principle: LT4356IMS-3#TRPBF Working Principle

The LT4356IMS-3 monitors both overvoltage and overcurrent conditions through external sense networks. The FB pin senses the output voltage through a resistor divider; when it exceeds the reference threshold, the error amplifier reduces GATE drive to regulate the output at the clamped voltage. For overcurrent, the voltage between VCC and SNS pins is monitored; an internal amplifier limits the sense voltage to 50 mV. In either fault condition, a fault timer (set by the TMR capacitor) starts inversely proportional to MOSFET stress. If the timer expires, FLT pulls low and the MOSFET turns off. The -3 variant latches the MOSFET off until the SHDN pin is momentarily pulled low, preventing automatic restart in persistent fault conditions. The auxiliary amplifier (IN+, AOUT) can be configured as a voltage comparator for level detection or as a linear regulator controller driving an external PNP pass transistor.

Pin Description: LT4356IMS-3#TRPBF Pin Definition and Functions
Pin Name Description
1 FB Feedback; output voltage divider for clamp voltage setting
2 OUT Output voltage sense; connects to MOSFET source
3 GATE Gate drive; drives external N-channel MOSFET
4 SNS Current sense; connects between VCC and sense resistor for OCP
5 VCC Input supply (4 V to 80 V)
6 SHDN Shutdown; pull low to disable or toggle to clear latchoff
7 FLT Fault output; active-low open-drain status indicator
8 EN Enable output from auxiliary amplifier
9 GND Ground
10 TMR Timer; capacitor to GND sets fault timeout duration
Application Scenarios: In which products and applications is LT4356IMS-3#TRPBF used
  • Automotive Surge Protection: Load dump and jump-start protection requiring latchoff for safety-critical systems
  • Hot Swap Controller: Live board insertion with overcurrent and overvoltage protection in telecom racks
  • High-Side Battery Switch: Controlled power connection in battery-powered industrial and medical equipment
  • Intrinsic Safety Barrier: Voltage and current limiting for explosion-proof environments requiring no-auto-restart
  • Reverse Polarity Protection: Back-to-back MOSFET configuration for -60 V reverse input withstand
Alternative Models: What chips are recommended as replacements for LT4356IMS-3#TRPBF
Model Manufacturer VIN Fault Mode Package Notes
LT4356IMS-1#TRPBF Analog Devices 4-80 V Auto retry MSOP-10 Retry variant, same package
LT4356IDE-3#TRPBF Analog Devices 4-80 V Latchoff DFN-12 DFN variant of -3
LT4363IMS-2#TRPBF Analog Devices 4-80 V 1% retry MSOP-12 UV/OV comparators added
MAX16141 Maxim 5.5-65 V Latchoff TDFN-12 Integrated 65 mOhm FET
TPS25982 Texas Instruments 4.5-65 V Configurable VQFN-14 eFuse with monitoring

LT4356IMS-3 is a surge stopper from ADI in MSOP-10 with latchoff protection. The LT4356-1 provides automatic retry after fault. The LT4356-2 offers 60µA quiescent with auxiliary amplifier always-on. The LT4363IDE-2 provides the same surge stopping function in smaller DFN-12 with overvoltage comparator. The MAX16141 from ADI/Maxim offers overvoltage protection with reverse polarity in TDFN-8. For eFuse integration, TPS2595 from TI combines current limiting and OV protection in VSSOP-10.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1