Opens in a new tab

LT4363IDE-2#TRPBF

2.5A surge stopper, 4-80V input, SOIC-8

5910

Effective Inventory

Image for reference only

Manufacturer Part:

LT4363IDE-2#TRPBF

Package:

SOIC-8 (5.00 x 4.00 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

LT4363IDE-2#TRPBF Overview

The LT4363IDE-2#TRPBF is a high voltage surge stopper from Analog Devices, operating voltage 4V-56V, with integrated reverse input protection, adjustable current limiting, external N-channel MOSFET, in a DFN-14 package.

Key Features

  • Operating voltage: 4V-56V
  • Adjustable current limiting
  • Reverse input protection
  • UV/OV lockout
  • Fault timer
  • Supply current: 2mA
Product Introduction: LT4363IDE-2#TRPBF Product Introduction

The LT4363IDE-2#TRPBF is a high-voltage surge stopper with current limit from Analog Devices, operating from 4 V to 80 V input in a 12-lead DFN (4 mm x 3 mm) package. It protects loads from high-voltage transients by controlling an external N-channel MOSFET to regulate the output to a safe level during overvoltage events. The -2 variant features automatic retry with less than 1 percent duty cycle after fault clearing. With reverse input protection to -60 V, adjustable fault timer, and UV/OV comparators, it is ideal for automotive load dump, hot swap, and industrial surge protection.

Working Principle: LT4363IDE-2#TRPBF Working Principle

The LT4363IDE-2 monitors the input voltage through the VCC pin and controls an external N-channel MOSFET via the GATE pin. During normal operation, the GATE is driven above the source to fully enhance the MOSFET. When an overvoltage transient occurs, the feedback (FB) pin voltage exceeds its threshold, and the error amplifier reduces the GATE drive to regulate the output at the clamped voltage level, allowing the load to continue operating. If the voltage drop between SNS and OUT exceeds 50 mV (overcurrent), an internal amplifier limits the sense voltage and starts a fault timer inversely proportional to MOSFET stress. If the timer expires, the FLT pin pulls low and the MOSFET turns off. The -2 variant automatically retries after a cool-down period with less than 1 percent duty cycle. The UV and OV comparators monitor input undervoltage and overvoltage conditions independently.

Pin Description: LT4363IDE-2#TRPBF Pin Definition and Functions
Pin Name Description
1 FB Feedback; connects to output voltage divider to set clamp voltage
2 OUT Output sense; monitors MOSFET source voltage
3 SNS Current sense; connects to sense resistor for overcurrent detection
4 GATE Gate drive output; drives external N-channel MOSFET
5 VCC Input supply (4 V to 80 V); also input voltage monitor
6 SHDN Shutdown; pull low to disable, withstands -60 V to 100 V
7 OV Overvoltage comparator input; adjustable threshold
8 NC No connect
9 GND Ground
10 FLT Fault output; active-low open-drain, pulls low before shutdown
11 ENOUT Enable output; indicates MOSFET gate is being driven
12 TMR Timer; connect capacitor to GND to set fault timeout
13 GND(EP) Exposed pad; connect to PCB ground plane
Application Scenarios: In which products and applications is LT4363IDE-2#TRPBF used
  • Automotive Load Dump Protection: Clamping 80 V load dump transients on 12 V or 24 V vehicle bus to safe levels
  • Hot Swap/Live Insertion: Inrush current limiting and short-circuit protection for pluggable modules and blade servers
  • Industrial 24 V/48 V Systems: Surge protection for factory automation and process control equipment
  • Avionic Power Protection: Meeting DO-160 surge requirements for aircraft electronic systems
  • Intrinsic Safety: Current and voltage limiting for hazardous environment electronics per IEC Ex standards
Alternative Models: What chips are recommended as replacements for LT4363IDE-2#TRPBF
Model Manufacturer VIN Fault Mode Package Notes
LT4363IMS-2#TRPBF Analog Devices 4-80 V Auto retry MSOP-12 MSOP variant
LT4363HS-2#TRPBF Analog Devices 4-80 V Auto retry SOIC-16 Wide temp (-40 to 125 C)
LT4363IDE-1#TRPBF Analog Devices 4-80 V Retry DFN-12 Retry variant, same package
LTC4366 Analog Devices 9-500 V Latchoff MSOP-12 Higher voltage version
TPS2595 Texas Instruments 4.5-65 V Auto retry VSON-12 Integrated FET eFuse

LT4363IDE-2 is a surge stopper from ADI in DFN-12 (4x3mm). The LT4363-1 version provides automatic retry after fault (vs. latchoff for -2). The LT4356IMS-3 offers similar surge stopping with latchoff in MSOP-10. The TPS2595 from TI provides eFuse with overvoltage protection in VSSOP-10 for lower voltage applications. The MAX16141 from ADI/Maxim offers overvoltage and reverse polarity protection in TDFN-8. For automotive ISO 7637 compliance, the LT4363-2 with external MOSFET provides robust 100V+ transient protection.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1