Opens in a new tab

LT8610AIMSE-5#PBF

42V, 3.5A sync buck regulator, 5V fixed out, 2.5uA IQ, MSOP-16, -40 to 125C

12611

Effective Inventory

Image for reference only

Manufacturer Part:

LT8610AIMSE-5#PBF

Package:

MSOP-16 with exposed pad (5.00 x 4.40 x 0.90 mm body)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LT8610AIMSE-5#PBF from Analog Devices is a 42 V, 3.5 A synchronous step-down regulator with a fixed 5 V output, ultralow 2.5 µA quiescent current, and I-grade temperature range of -40°C to +125°C. In a 16-lead MSOP package with exposed pad, it achieves 95% efficiency at 1 A from 12 V to 5 V and features a 30 ns minimum on-time, adjustable 200 kHz to 2.2 MHz frequency, and Burst Mode operation with less than 10 mVp-p output ripple.

Key Specifications

Input Voltage Range 3.4 V to 42 V
Output Voltage 5 V (fixed)
Max Output Current 3.5 A
Quiescent Current (Burst Mode) 2.5 µA
Switching Frequency 200 kHz to 2.2 MHz
Efficiency 95% at 1 A, 12VIN to 5VOUT
Dropout 200 mV at 1 A
Operating Temperature -40°C to +125°C (I-grade)
Package 16-MSOP with exposed pad

Features

  • 2.5 µA IQ Burst Mode with output ripple below 10 mVp-p
  • 3.5 A maximum output with integrated synchronous switches
  • 30 ns minimum switch-on time for high step-down ratios
  • Accurate 1 V EN/UV threshold for programmable UVLO
  • Internal compensation and soft-start
  • Power good flag with +/-9% threshold window
  • AEC-Q100 qualified

Applications

  • Automotive and industrial power supplies
  • 5 V point-of-load conversion from 12 V/24 V
  • Always-on battery-powered systems
  • GSM burst load power supplies
  • Embedded 5 V rail generation
Product Introduction: LT8610AIMSE-5#PBF Product Introduction

The LT8610AIMSE-5#PBF is a 42 V, 3.5 A synchronous step-down switching regulator from Analog Devices featuring a fixed 5 V output and an I-grade operating temperature range of -40°C to +125°C. Part of the LT8610A family, it offers higher output current (3.5 A vs 2.5 A for the base LT8610) and a faster 30 ns minimum switch-on time. The integrated top and bottom power switches enable synchronous operation, achieving up to 95% efficiency at 1 A from 12 V input. The ultralow 2.5 µA quiescent current in Burst Mode makes it ideal for always-on battery-powered applications. The switching frequency is adjustable from 200 kHz to 2.2 MHz via an external resistor and can be synchronized to an external clock. Internal compensation with peak current mode control provides stable operation with small inductors and fast transient response.

Working Principle: LT8610AIMSE-5#PBF Working Principle

The LT8610AIMSE-5 operates as a constant-frequency, peak current mode synchronous buck regulator. At each clock cycle the top NMOS switch turns on and inductor current ramps up until the peak current comparator trips. The top switch then turns off and the synchronous bottom NMOS switch turns on, allowing inductor current to decay. An error amplifier compares the VFB pin voltage against the internal reference to set the peak current threshold. For light-load efficiency, Burst Mode operation (SYNC pin low) shuts down all switching circuitry between bursts, reducing input supply current to just 2.5 µA while keeping output ripple below 10 mVp-p. In pulse-skip mode (SYNC high or external clock), the oscillator runs continuously and skips pulses at light loads. The EN/UV pin features a precise 1 V threshold for programmable input undervoltage lockout, and the PG flag indicates when VOUT is within +/-9% of the target. Frequency foldback protects against overload by reducing the switching frequency when the feedback voltage is low.

Pin Description: LT8610AIMSE-5#PBF Pin Definition and Functions
Pin Name Type Function
1 BST Power Bootstrap capacitor for top switch driver
2 SW Output Switch node (inductor connection)
3 SW Output Switch node (inductor connection)
4 BIAS Input Internal regulator supply; connect to VOUT if >= 3.3 V
5 TR/SS Analog Soft-start capacitor; programs output ramp rate
6 PG Output Power good flag (open-drain)
7 RT Analog Switching frequency set resistor
8 SYNC Input Mode select: low = Burst, high = pulse-skip, clock = sync
9 VFB Input Feedback voltage sense (connect to VOUT for fixed 5 V)
10 EN/UV Input Enable / undervoltage lockout (1 V threshold)
11 INTVCC Power Internal 3.4 V regulator decoupling pin
12 VIN Power Input supply (3.4 V to 42 V)
13 VIN Power Input supply
14 NC – No connect
15 GND Ground Signal ground
16 GND Ground Signal ground
17 GND (EP) Ground Exposed pad; solder to PCB ground plane
Application Scenarios: In which products and applications is LT8610AIMSE-5#PBF used
  • Automotive ECU 5 V Supply: 5 V rail generation from 12 V/24 V battery for microcontrollers and sensors
  • Industrial Point-of-Load: 5 V POL conversion from 24 V or 36 V industrial bus
  • Battery-Powered Always-On: Ultra-low IQ standby systems where 2.5 µA drain preserves battery life
  • General-Purpose Step-Down: Wide-input 5 V supply from wall adapters or unregulated sources
  • Distributed Power Architecture: 5 V intermediate bus from 12 V/24 V/48 V backbone
Alternative Models: What chips are recommended as replacements for LT8610AIMSE-5#PBF
Model Manufacturer VIN IOUT VOUT IQ Package Notes
LT8610AHMSE-5#PBF Analog Devices 3.4-42 V 3.5 A 5 V 2.5 µA MSOP-16 H-grade, 150C max
LT8609AIMSE-5#PBF Analog Devices 3.0-42 V 2 A 5 V 2.5 µA MSOP-16 Lower current, wider VIN
TPS54061DRBR Texas Instruments 4.7-60 V 0.5 A Adj 0.9 µA VSON-8 Ultra-low IQ, lower current
LTM8020MPV Analog Devices 3.4-36 V 1 A Adj 5 µA BGA-25 uModule, lower current
MAX17503ATC+ Analog Devices 4.5-60 V 2.5 A Adj 3.1 µA TDFN-12 Wider input range

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1