Opens in a new tab

LTC2606IDD-1#TRPBF

16-bit rail-to-rail DAC, I2C, 4LSB INL, DFN-8, precision voltage output

2030

Effective Inventory

Image for reference only

Manufacturer Part:

LTC2606IDD-1#TRPBF

Package:

DFN-8 (3.00 x 3.00 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTC2606IDD-1#TRPBF from Analog Devices is a 16-bit, rail-to-rail voltage-output DAC with I2C interface in a DFN-8 package. Offering 16-bit monotonicity, 4 LSB INL, and 0.02% typical gain error, it delivers precision voltage generation for calibration and control applications.

Key Specifications

Resolution 16 bits
Channels 1
Output Type Voltage, rail-to-rail
Settling Time 10 µs (to 0.5 LSB)
INL ±4 LSB (max)
Interface I2C (up to 400 kHz)
Supply Voltage 2.7 V to 5.5 V
Reference External (0 V to VDD)
Operating Temperature -40°C to +85°C
Package DFN-8 (3.0 x 3.0 mm)

Features

  • 16-bit resolution with guaranteed monotonicity
  • Rail-to-rail voltage output with integrated output amplifier
  • Low 4 LSB maximum integral nonlinearity
  • I2C interface with address pins for multi-device bus
  • Power-on reset to zero-scale for safe startup
  • Compact 3 mm x 3 mm DFN-8 package

Applications

  • Precision calibration and trimming
  • Industrial process control setpoints
  • Automated test equipment
  • Optical module bias control
  • Motor speed reference generation
Product Introduction: LTC2606IDD-1#TRPBF Product Introduction

The LTC2606IDD-1#TRPBF from Analog Devices is a single-channel 16-bit rail-to-rail voltage-output digital-to-analog converter with an I2C serial interface in a compact 3 mm x 3 mm DFN-8 package. The device provides 16-bit monotonicity with ±4 LSB maximum integral nonlinearity and 0.02% typical gain error, delivering precision voltage generation for calibration and control applications. The rail-to-rail output amplifier swings to within a few millivolts of both supply rails, maximizing the usable output range. The external reference input accepts voltages from 0 V to VDD, allowing the full-scale output to be set independently of the supply voltage. The I2C interface supports standard (100 kHz) and fast (400 kHz) modes with three address pins allowing up to 27 devices on the same bus. Power-on reset sets the output to zero-scale, ensuring a defined startup state. The -1 suffix indicates the output span configuration.

Working Principle: LTC2606IDD-1#TRPBF Working Principle

The LTC2606IDD-1 uses a segmented R-2R DAC architecture with 16-bit resolution. The digital input code is received via I2C and stored in an input register. A double-buffered architecture allows the input register to be updated without affecting the active DAC register, enabling synchronous output updates across multiple devices on the same I2C bus. The DAC core converts the 16-bit digital code to a proportional current, which is converted to a voltage by the integrated rail-to-rail output amplifier. The output voltage equals VREF x (Code / 65536) for the -1 configuration. The segmented architecture uses decoded upper bits to switch entire R-2R segments, reducing glitch energy during major-carry transitions. The 10 µs settling time includes both the DAC core response and the output amplifier settling to 0.5 LSB.

Pin Description: LTC2606IDD-1#TRPBF Pin Definition and Functions
Pin Name Function
1 VOUT Amplified voltage output (rail-to-rail)
2 REF External reference voltage input (0 V to VDD)
3 GND Ground connection
4 SCL I2C serial clock input
5 SDA I2C serial data input/output
6 ADR0 I2C address select bit 0
7 ADR1 I2C address select bit 1
8 VDD Supply voltage (2.7 V to 5.5 V)
Pad GND Exposed pad; connect to ground plane for thermal dissipation
Application Scenarios: In which products and applications is LTC2606IDD-1#TRPBF used
  • Calibration and Trimming: Precision voltage setpoint generation for sensor offset and gain calibration in industrial measurement systems
  • Process Control: Analog setpoint output for PID controllers in temperature, pressure, and flow control loops
  • Automated Test Equipment: Programmable stimulus voltage generation for device characterization and production testing
  • Optical Module Bias: Precise bias voltage control for laser diode and modulator drivers in optical transceivers
  • Motor Speed Reference: Analog reference voltage for motor drive speed setpoint with I2C digital control
Alternative Models: What chips are recommended as replacements for LTC2606IDD-1#TRPBF
Model Manufacturer Bits INL Interface Package Notes
LTC2606IDD-1#PBF ADI 16 4 LSB I2C TSOT-23-8 Same device, TSOT package
AD5693RBRMZ ADI 16 4 LSB I2C MSOP-8 With internal 2.5V reference
DAC8568SDSCR TI 16 8 LSB SPI SOT-23-8 SPI interface, higher INL
MCP4728-E/UN Microchip 12 2 LSB I2C MSOP-10 4-channel, lower resolution
MAX5216GUA+T ADI 16 4 LSB SPI MSOP-8 SPI interface alternative

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1