Opens in a new tab

LTC3119IUFD#PBF

18V/2A bidirectional buck-boost, 2.2-18V in/out, 95% eff, QFN-28, battery backup

566

Effective Inventory

Image for reference only

Manufacturer Part:

LTC3119IUFD#PBF

Package:

28-Lead QFN (4 x 5 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LTC3119IUFD#PBF from Analog Devices is a 18V, 2A bidirectional buck-boost DC/DC converter with a 2.2V to 18V input and output range, achieving up to 95% efficiency in a 28-Lead QFN package.

Key Specifications

Topology Bidirectional Buck-Boost
Input Voltage 2.2V to 18V
Output Voltage 2.2V to 18V (programmable)
Output Current 2A (continuous)
Switching Frequency 1MHz (default, adjustable 500kHz-1.5MHz)
Efficiency Up to 95%
Operating Modes Buck, Boost, Buck-Boost (seamless transition)
Direction Control Bidirectional (power flow in either direction)
Package 28-Lead QFN (4mm x 5mm)
Operating Temperature -40 to +125 C

Features

  • Bidirectional power flow for battery backup systems
  • Seamless transition between buck, boost, and buck-boost modes
  • Low-noise 4-switch architecture with forced continuous conduction

Applications

  • Battery backup systems
  • Supercapacitor chargers and backup
  • Industrial backup power
  • Automotive battery balancers
Product Introduction: LTC3119IUFD#PBF Product Introduction

The LTC3119IUFD#PBF from Analog Devices is a high-efficiency, 18V, 2A bidirectional buck-boost DC/DC converter that combines a unique 4-switch architecture with bidirectional power flow capability. The device can operate from an input voltage as low as 2.2V to as high as 18V, producing a regulated output between 2.2V and 18V regardless of the input-to-output voltage relationship. The bidirectional capability allows the same component to function as either a step-up or step-down converter, with power flowing in either direction depending on the system requirements. This is particularly valuable in battery backup applications where the converter must charge the backup battery from the main supply (forward mode) and then supply power from the battery back to the system (reverse mode) when the main supply fails. The 4-switch topology enables seamless transitions between buck, boost, and buck-boost operating modes without output voltage discontinuity, maintaining regulation even when the input voltage passes through the output voltage level. Operating at a default switching frequency of 1MHz (adjustable 500kHz to 1.5MHz), the LTC3119 achieves up to 95% efficiency while keeping external inductor and capacitor sizes small. The forced continuous conduction mode eliminates the pulse-skipping behavior that creates output noise in discontinuous mode, making the device suitable for noise-sensitive applications. The LTC3119 is available in a compact 28-lead QFN package (4mm x 5mm).

Working Principle: LTC3119IUFD#PBF Working Principle

The LTC3119IUFD#PBF operates as a 4-switch buck-boost converter with bidirectional power flow. Key subsystems include: (1) 4-Switch Bridge – four N-channel MOSFETs arranged in an H-bridge configuration between the input and output; depending on the VIN/VOUT relationship, different pairs of switches are modulated to implement buck, boost, or buck-boost operation; (2) Seamless Mode Transition – the control logic continuously monitors VIN and VOUT and transitions between operating modes without output discontinuity; in buck mode (VIN > VOUT), switches A and B are modulated while C is on and D is off; in boost mode (VIN < VOUT), switches C and D are modulated while A is on and B is off; in buck-boost mode (VIN near VOUT), all four switches are modulated; (3) Bidirectional Control – the DIR pin selects the power flow direction; when DIR selects forward mode, power flows from the VIN side to the VOUT side; when DIR selects reverse mode, the power flow reverses, allowing the output to supply the input; this enables a single converter to handle both battery charging and backup supply functions; (4) Current Mode Control – peak current mode control provides cycle-by-cycle current limiting and simplifies loop compensation; the average inductor current is regulated to maintain the desired power flow; (5) Frequency Synchronization – an internal oscillator runs at 1MHz default but can be synchronized to an external clock or adjusted via the RT pin for EMI optimization.

Pin Description: LTC3119IUFD#PBF Pin Definition and Functions
Pin Group Count Function
Power (VIN, VOUT, SW1, SW2) 8 Input, output, and switch nodes
Control (DIR, RUN, FB, VC) 4 Direction, enable, feedback, compensation
Frequency (SYNC/RT, CLKOUT) 2 Frequency adjust and synchronization
Current Sense (CSP, CSN) 2 Average current sense for bidirectional operation
Power Good (PGOOD) 1 Open-drain power good indicator
Bias (INTVCC, BOOST) 3 Internal bias and bootstrap
Ground (GND, PGND) 4 Signal and power ground
NC 4 No connect / thermal relief
Application Scenarios: In which products and applications is LTC3119IUFD#PBF used
  • Battery backup: forward mode charges 12V SLA from 24V supply; reverse mode provides 12V output when main supply fails
  • Supercapacitor ride-through: charges supercap from 5V rail; discharges supercap back to 5V during power interruption
  • Automotive battery balancer: transfers energy between 12V and 48V battery systems bidirectionally
  • Industrial UPS: single converter handles both battery charging and backup supply functions
Alternative Models: What chips are recommended as replacements for LTC3119IUFD#PBF
Manufacturer Part Number Package Notes
ADI LTC3119EFE#PBF TSSOP-28E Lead-frame package version
ADI LTC3115-1IHF#PBF QFN-40 Higher voltage (15V), higher current (2.5A)
TI LM5170RHFR VQFN-28 Bidirectional 10A buck-boost controller
TI TPS55340QRTERQ1 VQFN-16 Unidirectional boost, automotive

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1