Opens in a new tab

LTC3615EUF

6A Monolithic Synchronous Buck, 2.25-5.5V, 4MHz, 22mOhm, QFN-28

5128

Effective Inventory

Image for reference only

Manufacturer Part:

LTC3615EUF

Package:

QFN-28 (4 x 5 x 0.75 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTC3615EUF from Analog Devices is a 6 A, 2.25 V to 5.5 V input monolithic synchronous buck regulator with 22 mOhm on-resistance switches, operating at up to 4 MHz switching frequency in a QFN-28 package.

Key Specifications

Topology Monolithic Synchronous Buck
Input Voltage 2.25 V to 5.5 V
Output Voltage 0.6 V to 5.5 V (Adjustable)
Output Current 6 A
Switching Frequency 500 kHz to 4 MHz (Programmable)
Internal Switch RDS(on) 22 mOhm (top + bottom combined)
Efficiency Up to 95%
Reference Voltage 0.6 V (±1%)
Package QFN-28 (4 x 5 mm)
Operating Temperature -40°C to 85°C

Features

  • 6 A output current with 22 mOhm integrated MOSFETs
  • Programmable frequency from 500 kHz to 4 MHz
  • Selectable Burst Mode or forced continuous mode
  • Synchronizable switching frequency
  • 100% duty cycle for low dropout

Applications

  • Point-of-load regulation for FPGAs and processors
  • Server and storage system power supplies
  • Portable instruments and battery-powered devices
  • Telecom and networking equipment
Product Introduction: LTC3615EUF Product Introduction

The LTC3615EUF from Analog Devices is a high-current monolithic synchronous step-down DC/DC converter delivering up to 6 A output from a 2.25 V to 5.5 V input. The device integrates 22 mOhm combined on-resistance top and bottom MOSFET switches in a compact QFN-28 package. Switching frequency is programmable from 500 kHz to 4 MHz via an external RT resistor and can be synchronized to an external clock. The device supports Burst Mode operation for high efficiency at light loads, or forced continuous operation for lower output ripple. The 0.6 V reference voltage allows output voltages as low as 0.6 V. 100% duty cycle operation enables low dropout in applications where VIN approaches VOUT.

Working Principle: LTC3615EUF Working Principle

The LTC3615EUF uses a constant-frequency current-mode control architecture. The internal oscillator sets the switching frequency (500 kHz to 4 MHz) via the RT pin. The integrated top and bottom MOSFET switches (22 mOhm combined RDS(on)) alternate to step down the input voltage. Current-mode control simplifies loop compensation and provides cycle-by-cycle current limiting. In Burst Mode, the device delivers energy in controlled bursts and enters sleep between bursts, reducing switching losses at light loads. The MODE/SYNC pin selects operating mode and accepts an external clock for synchronization. The 0.6 V feedback reference is compared against the output voltage divided by the external resistor divider. The 100% duty cycle capability keeps the top switch on continuously when VIN drops close to VOUT, minimizing dropout voltage.

Pin Description: LTC3615EUF Pin Definition and Functions
Pin Group Name Type Function
1 RUN Input Enable / run control
2 ITH I/O Error amplifier compensation
3 VFB Input Feedback voltage (0.6V reference)
4 SGND Ground Signal ground
5-8 SW Output Switch node (4 pins)
9-12 PGND Ground Power ground (4 pins)
13-16 PVIN Power Power input supply (4 pins)
17 SVIN Power Signal input supply
18 RT Input Frequency set resistor
19 MODE/SYNC I/O Mode select / external sync
20 PGOOD Output Power good indicator
21 BST Power Bootstrap for top switch
22-23 TR/SS I/O Soft-start / tracking
24-28 NC/GND -/Ground No-connect and ground
Application Scenarios: In which products and applications is LTC3615EUF used
  • FPGA and processor core voltage POL regulation (1.0V, 1.2V, 1.8V)
  • Server and storage system DDR memory power
  • Portable instrument DC-DC conversion from Li-ion
  • Networking equipment point-of-load supplies
  • Battery-powered systems with high-efficiency buck regulation
Alternative Models: What chips are recommended as replacements for LTC3615EUF
Manufacturer Part Number Package Notes
Analog Devices LTC3615IUF QFN-28 -40°C to 125°C I-grade
Analog Devices LTC3414EFE#PBF TSSOP-20 EP 4A version, same family
Texas Instruments TPS62160DRVR WSON-6 3A, 3-17V input
Monolithic Power MP8860DN-LF-Z QFN-22 8A, 4MHz synchronous buck
Richtek RT8012AGQW WQFN-20 4A, 1.5MHz synchronous buck

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1