Opens in a new tab

LTC3630EMSE#TRPBF

65V 500mA synchronous buck, 12uA IQ, 4-65V input, MSOP-16, pin-selectable VOUT, Burst Mode

2900

Effective Inventory

Image for reference only

Manufacturer Part:

LTC3630EMSE#TRPBF

Package:

16-Lead MSOP with Exposed Pad (5.0 x 4.0 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LTC3630EMSE#TRPBF from Analog Devices is a high-efficiency 65V, 500mA synchronous step-down DC-DC converter with 12uA quiescent current in a 16-lead MSOP package. Combining a wide 4V to 65V input range with Burst Mode operation for ultra-low standby power, it is ideal for automotive, industrial, and telecom always-on power supplies.

Key Specifications

Input Voltage Range 4 V to 65 V
Output Current 500 mA
Quiescent Current (Burst Mode) 12 uA (typ)
Output Voltage Range 0.8 V to VIN
Feedback Voltage 0.8V +/-1%
Preset Output Voltages 1.8V, 3.3V, 5V (pin-selectable)
Switching Frequency 100 kHz to 500 kHz (adjustable)
Operating Temperature -40C to +125C

Features

  • 65V maximum input voltage for automotive and industrial applications
  • Ultra-low 12uA quiescent current in Burst Mode for always-on systems
  • Internal synchronous switches eliminate external Schottky diode
  • Pin-selectable output voltages (1.8V, 3.3V, 5V) or adjustable via resistor divider

Applications

  • Automotive battery-powered always-on systems
  • Industrial 24V/48V distributed power
  • Telecom infrastructure power supplies
  • Battery-powered portable instruments
Product Introduction: LTC3630EMSE#TRPBF Product Introduction

The LTC3630EMSE#TRPBF from Analog Devices is a high-efficiency synchronous step-down DC-DC converter that operates from a 4V to 65V input and delivers up to 500mA output current. The device features ultra-low 12uA quiescent current in Burst Mode operation, making it ideal for always-on battery-powered systems where standby power consumption is critical. The output voltage can be pin-selected to 1.8V, 3.3V, or 5V without external resistors, or adjusted from 0.8V to VIN using a resistor divider. The internal synchronous rectifier eliminates the need for an external Schottky diode, reducing component count and board space. The switching frequency is adjustable from 100kHz to 500kHz via an external resistor, allowing optimization of efficiency and component size.

Working Principle: LTC3630EMSE#TRPBF Working Principle

The LTC3630EMSE#TRPBF uses a current-mode synchronous buck converter topology with Burst Mode for light-load efficiency. (1) Power Stage: Internal high-side and low-side N-channel MOSFET switches form a synchronous buck converter. During the on-time, the high-side switch connects the inductor to VIN, increasing inductor current. During the off-time, the low-side synchronous switch provides a low-resistance path for inductor current, improving efficiency compared to a diode. (2) Current-Mode Control: An internal current sense circuit monitors the peak inductor current each switching cycle, providing cycle-by-cycle current limiting and fast transient response. The error amplifier compares the feedback voltage to the 0.8V reference and adjusts the peak current threshold. (3) Burst Mode: At light loads, the converter enters Burst Mode where it delivers energy in bursts followed by a sleep period, reducing the effective switching frequency and quiescent current to 12uA. (4) RUN Pin: The precise RUN pin threshold (1.21V) allows programmable input undervoltage lockout with a resistor divider.

Pin Description: LTC3630EMSE#TRPBF Pin Definition and Functions
Pin Name Type Function
1 BOOST Power Bootstrap supply for high-side driver
2 SW Output Switch node (connect to inductor)
3 SW Output Switch node (connect to inductor)
4 VIN Power Input supply (4-65V)
5 VIN Power Input supply (4-65V)
6 RUN Input Enable/UVLO (precision 1.21V threshold)
7 VOUT Input Output voltage sense (for pin-selectable modes)
8 VFB Input Feedback input (0.8V reference)
9 RT Input Frequency set resistor (100-500kHz)
10 MODE Input Output voltage select (1.8V/3.3V/5V/adjust)
11 SS I/O Soft-start capacitor (internal and external)
12 PGOOD Output Power-good output (open-drain)
13 GND Ground Ground reference
14 GND Ground Ground reference
15 INTVCC Power Internal 5V regulator output (bypass cap)
16 BOOST Power Bootstrap supply for high-side driver
Application Scenarios: In which products and applications is LTC3630EMSE#TRPBF used
  • Automotive battery-powered always-on systems with 12uA quiescent current
  • Industrial 24V/48V distributed power with 65V input rating
  • Telecom infrastructure power supplies with wide input range
  • Battery-powered portable instruments requiring high efficiency at light loads
Alternative Models: What chips are recommended as replacements for LTC3630EMSE#TRPBF
Manufacturer Part Number Package Notes
Analog Devices LTC3630IMSE#PBF MSOP-16 Industrial -40 to +125C
TI LM5017 VSSOP-10 100V, 600mA buck
Monolithic Power MP8759GD-Z QFN-16 60V, 4A, higher current
RECOM RPM5.0-2.0 Module Complete module solution

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1