Opens in a new tab

LTC3789EGN#TRPBF

4-switch synchronous buck-boost DC/DC controller, 4-38V input, 0.8-38V output, SSOP-28 package, up to 98% efficiency

6228

Effective Inventory

Image for reference only

Manufacturer Part:

LTC3789EGN#TRPBF

Package:

SSOP-28 (GN)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LTC3789EGN#TRPBF from Analog Devices is a high efficiency, synchronous, 4-switch buck-boost DC/DC controller that operates from input voltages above, below, or equal to the output voltage. Housed in a 28-lead SSOP package, it provides a programmable output voltage and supports input voltages from 4V to 38V, making it ideal for automotive, industrial, and battery-powered systems.

Key Specifications

Input Voltage Range 4V to 38V
Output Voltage Range 0.8V to 38V
Switching Frequency 200kHz to 600kHz (programmable)
Reference Voltage 0.8V
Quiescent Current 290μA (typical)
Shutdown Current 8μA
Operating Temperature -40°C to +125°C
Package SSOP-28 (GN)

Features

  • Synchronous 4-switch buck-boost topology for seamless transitions
  • Up to 98% efficiency in buck or boost mode
  • Programmable switching frequency with external synchronization
  • Adjustable soft-start with internal pull-up current
  • Current mode control for fast transient response
  • Internal LDO with EXTVCC support for improved efficiency
  • Input and output average current limit capability

Applications

  • Automotive battery regulation systems
  • Industrial distributed power architectures
  • Battery-powered portable equipment
  • Solar-powered regulator systems
  • Telecom power supplies
Product Introduction: LTC3789EGN#TRPBF Product Introduction

The LTC3789 is a high performance synchronous buck-boost switching regulator controller from Analog Devices that operates from input voltages above, below, or equal to the output voltage. The topology uses four N-channel MOSFET switches in a full-bridge configuration, controlled by a current-mode architecture that provides fast transient response and easy loop stabilization. The device incorporates an internal low dropout regulator (LDO) that powers the gate drivers from VIN or from an external supply via the EXTVCC pin for improved efficiency. The LTC3789 also features programmable switching frequency, adjustable soft-start, and input/output average current limiting, making it a versatile solution for a wide range of power conversion applications.

Working Principle: LTC3789EGN#TRPBF Working Principle

The LTC3789 employs a 4-switch synchronous buck-boost topology with current-mode control. When VIN is significantly higher than VOUT, the controller operates in buck mode, using the high-side switch TG1 and synchronous switch BG1 to step down the voltage. When VIN is significantly lower than VOUT, it operates in boost mode, using TG2 and BG2 to step up the voltage. When VIN is close to VOUT, the controller seamlessly transitions through buck-boost mode, utilizing all four switches. The current-mode architecture senses the inductor current through an external sense resistor and compares it with the error amplifier output to determine the switch duty cycle. This provides inherent line rejection, cycle-by-cycle current limiting, and simplified loop compensation.

Pin Description: LTC3789EGN#TRPBF Pin Definition and Functions
Pin Name Description
1 VFB Error amplifier feedback input; receives voltage from external resistive divider
2 SS External soft-start input; capacitor to ground sets ramp time
3 SENSE+ Positive input to current sense comparator
4 SENSE- Negative input to current sense comparator
5 ITH Error amplifier output and compensation point
6 SGND Small signal ground
7 MODE/PLLIN Mode selection or external sync input
8 FREQ Frequency set pin; resistor to ground programs switching frequency
9 RUN Run control input; below 0.5V shuts down the IC
10 VINSNS VIN sense input for buck-boost transition comparator
11 VOUTSNS VOUT sense input for buck-boost transition comparator
12 ILIM Average current sense range input
13 IOSENSE+ Positive input to I/O average current sense amplifier
14 IOSENSE- Negative input to I/O average current sense amplifier
15 TRIM Tie to GND for normal operation
16 BG2 Bottom gate drive for synchronous MOSFET on output side
17 TG2 Top gate drive for high-side MOSFET on output side
18 BOOST2 Bootstrap supply for top-side driver on output side
19 BG1 Bottom gate drive for synchronous MOSFET on input side
20 EXTVCC External power input to internal LDO
21 INTVCC Output of internal LDO; must be bypassed with 4.7μF capacitor
22 VIN Main supply pin
23 BG1 Bottom gate drive for synchronous MOSFET on input side
24 PGND Driver power ground
25 BOOST1 Bootstrap supply for top-side driver on input side
26 TG1 Top gate drive for high-side MOSFET on input side
27 SS Soft-start pin (secondary function)
28 SENSE+ Current sense positive input (alternate)
Application Scenarios: In which products and applications is LTC3789EGN#TRPBF used
  • Automotive Battery Regulation: Maintains stable 12V output from a battery that varies from 6V to 18V during cranking and charging
  • Industrial Distributed Power: Converts 24V bus to regulated 12V or 5V with seamless transition through input voltage variations
  • Portable Battery-Powered Devices: Regulates output from multi-cell Li-ion packs (6V-16.8V) to constant system voltage
  • Solar Power Systems: Converts variable solar panel voltage to stable bus voltage for battery charging
Alternative Models: What chips are recommended as replacements for LTC3789EGN#TRPBF
Model Manufacturer VIN Range Topology Package
LTC3789IFE#TRPBF Analog Devices 4-38V Buck-Boost TSSOP-28
LTC3789EUH#TRPBF Analog Devices 4-38V Buck-Boost QFN-32
LM5175RHFR Texas Instruments 3.5-42V Buck-Boost VQFN-28
MPU17-4.5-QC Monolithic Power 4-36V Buck-Boost QFN
LTC3115IFE#TRPBF Analog Devices 2.7-40V Buck-Boost TSSOP-28

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1