Opens in a new tab

LTC4054ES5-4.2#TRPBF

Li-Ion charger, 4.2V, 500mA, C/10 terminate, TSOT-23-5

4100

Effective Inventory

Image for reference only

Manufacturer Part:

LTC4054ES5-4.2#TRPBF

Package:

5-Pin TSOT-23 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTC4054ES5-4.2#TRPBF is an Analog Devices (formerly Linear Technology) single-cell Li-Ion battery charger with 4.2V float voltage, 500mA charge current, and C/10 charge termination. Packaged in 5-pin TSOT-23, -40°C to +85°C, tape-and-reel.

Key Specifications

Float Voltage 4.2 V
Charge Current Up to 500 mA (programmable)
Input Voltage 4.25 V to 6.5 V
Termination C/10 auto-terminate
Precharge 10% of programmed current
Package 5-Pin TSOT-23

Features

  • 4.2V precision float voltage (±1%)
  • Programmable charge current up to 500mA
  • C/10 charge termination
  • Preconditioning for deeply depleted cells
  • Charge status output (CHRG pin)
  • Thermal regulation and shutdown

Applications

  • Single-cell Li-Ion / Li-Po chargers
  • USB-powered charging
  • Portable electronics
  • Wireless sensor nodes
Product Introduction: LTC4054ES5-4.2#TRPBF Product Introduction

The LTC4054ES5-4.2#TRPBF is an Analog Devices (formerly Linear Technology) complete single-cell Li-Ion / Li-Polymer battery charger with a 4.2V float voltage in a 5-pin TSOT-23 package. The device integrates a precision ±1% 4.2V voltage reference, current sense, and charge control logic, requiring only a single external resistor to program the charge current up to 500mA. The charge algorithm follows the standard CC-CV profile: constant-current charging until the battery reaches 4.2V, then constant-voltage charging with gradually decreasing current until C/10 termination. For deeply depleted cells below 2.9V, a preconditioning phase charges at 10% of the programmed current until the cell voltage rises to a safe level. The CHRG open-drain status output indicates charging in progress. Thermal regulation reduces the charge current when the junction temperature approaches 115°C, and thermal shutdown disables the charger at approximately 145°C. The #TRPBF suffix indicates tape-and-reel packaging with Pb-free finish.

Working Principle: LTC4054ES5-4.2#TRPBF Working Principle

The LTC4054 implements a CC-CV (constant-current / constant-voltage) charging algorithm. The PROG pin sets the charge current through an external resistor to ground: ICHARGE = 1000V / RPROG. An internal PMOS pass transistor regulates the charge current in CC mode and the battery voltage in CV mode. When the battery voltage is below 2.9V, the preconditioning circuit limits charge current to 10% of the programmed value. Once the battery reaches 4.2V, the charger transitions to CV mode, holding the output at 4.2V while the charge current naturally decreases. When the current drops below C/10 (10% of programmed current), the C/10 comparator triggers termination and the CHRG pin goes high-impedance. The internal ±1% bandgap reference ensures the 4.2V float voltage accuracy required for safe Li-Ion charging. Thermal regulation monitors the die temperature and reduces charge current linearly above 115°C to prevent overheating during high-power USB charging.

Pin Description: LTC4054ES5-4.2#TRPBF Pin Definition and Functions
Pin Mnemonic Description
1 CHRG Charge status output (open-drain)
2 GND Ground
3 BAT Battery connection (4.2V output)
4 VCC Input supply (4.25-6.5V)
5 PROG Charge current program resistor
Application Scenarios: In which products and applications is LTC4054ES5-4.2#TRPBF used
  • USB-powered single-cell Li-Po charger with 500mA charge current and C/10 termination
  • Wireless sensor node with 4.2V Li-Ion charging from 5V solar panel input
  • Portable medical device with CHRG status LED indication and thermal regulation
  • Bluetooth headset charging dock with preconditioning for deeply depleted cells
Alternative Models: What chips are recommended as replacements for LTC4054ES5-4.2#TRPBF
Model Manufacturer Key Difference
LTC4054ES5-4.4#TRPBF ADI 4.4V for Li-Ion HV cells
MCP73831T-2ACI/OT Microchip Similar 4.2V charger, SOT-23-5
TP4056 NanJing Top 1A version, 8-pin SOP
BQ24040DSQR TI Similar, with power path

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1