Opens in a new tab

LTC4095EDC

USB Li-Ion charger, 1.2A, PowerPath, 4.1/4.2V select, DFN-12

3604

Effective Inventory

Image for reference only

Manufacturer Part:

LTC4095EDC

Package:

DFN-12 (3.0 x 3.0 x 0.75 mm, DC package, w/ thermal pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LTC4095EDC from Analog Devices is a USB/AC adapter linear Li-Ion battery charger with 1.2A charge current, PowerPath control, and USB compliance in a 3x3mm DFN package.

Key Specifications

Function USB/AC Adapter Li-Ion Linear Battery Charger
Charge Current Up to 1.2A (programmable)
Input Voltage 4.35V to 5.5V (USB) or up to 9.5V (wall adapter)
Battery Voltage 4.1V or 4.2V (pin selectable)
Charge Termination Current-based (C/10 or programmable)
PowerPath Control Yes (BAT powers system when wall adapter removed)
USB Compliance 100mA / 500mA / Host mode
Thermal Regulation Yes (reduces charge current at high temp)
Charge Status CHRG and ACPR open-drain outputs
Package DFN-12 (3 x 3 x 0.75mm)
Operating Temperature -40 to +85 C

Features

  • 1.2A maximum charge current
  • USB 100mA/500mA compliance with HPWR pin
  • PowerPath instant-on: system powered from wall adapter or battery
  • 4.1V or 4.2V battery float voltage selection
  • Thermal regulation prevents overheating
  • NTC thermistor input for battery temperature qualification
  • Automatic recharge when battery drops below threshold

Applications

  • USB-powered Li-Ion devices
  • Smartphone and PDA charging Portable medical devices USB peripherals with internal battery
Product Introduction: LTC4095EDC Product Introduction

The LTC4095EDC from Analog Devices is a complete linear battery charger for single-cell Li-Ion/Li-Polymer batteries, designed for USB and wall adapter power sources. The device integrates PowerPath control that automatically selects the best power source for the system – when a wall adapter or USB port is connected, the system is powered from the input while the battery charges; when the input is removed, the battery seamlessly powers the system through an internal switch, providing uninterrupted operation. The 1.2A maximum charge current (programmable via a single external resistor) supports fast charging from high-current wall adapters, while the USB compliance modes (100mA for USB default, 500mA when HPWR is asserted) prevent overloading the USB host. The CLS (current limit set) pin allows dynamic charge current adjustment based on the available input current, enabling priority sharing between the system load and battery charging. The battery float voltage is pin-selectable between 4.1V and 4.2V via the VSEL pin, accommodating different Li-Ion chemistry requirements. The thermal regulation loop monitors the junction temperature and automatically reduces the charge current when the temperature approaches the thermal limit, preventing thermal shutdown and allowing the charger to operate at the maximum safe charge current under all conditions. The NTC thermistor input (NTC pin) qualifies the battery temperature before and during charging, suspending charging if the battery is too hot or too cold. The CHRG open-drain output indicates charging status, and the ACPR output indicates input power presence. The compact 3x3mm DFN package minimizes board space for portable applications.

Working Principle: LTC4095EDC Working Principle

The LTC4095EDC operates as a linear Li-Ion battery charger with PowerPath control. Key subsystems include: (1) Linear Charger – a P-channel MOSFET pass transistor between the input (VCC) and battery (BAT) regulates the charge current and voltage; in constant-current (CC) mode, the pass transistor limits current to the programmed value (set by RPROG); when the battery reaches the float voltage (4.1V or 4.2V), the charger transitions to constant-voltage (CV) mode; as the battery charges, the current decreases; when it drops below C/10 (or the programmed termination threshold), charging terminates; (2) PowerPath Control – an internal switch connects either VCC (input) or BAT (battery) to the system output; when VCC is present and above the UVLO threshold, VCC powers the system through an internal ideal diode and the charger simultaneously charges the battery; when VCC is removed, the battery powers the system through a second ideal diode with minimal voltage drop; this provides seamless power source switchover with no system interruption; (3) USB Compliance – in USB mode (HPWR=low), the charge current is limited to 100mA; when HPWR is driven high (indicating a 500mA-capable port), the current limit increases to 500mA; when a wall adapter is detected (VCC > 5.5V or CLS pin driven), the full 1.2A charge current is available; (4) Thermal Regulation – an internal temperature sensor monitors junction temperature; if it exceeds approximately 105C, the charge current is reduced to maintain the temperature at the thermal limit; this prevents thermal shutdown while maximizing charge current under all thermal conditions; (5) NTC Qualification – an external NTC thermistor connected from the NTC pin to GND forms a voltage divider with an internal resistor; if the thermistor voltage indicates the battery is outside the 0-50C qualification window, charging is suspended.

Pin Description: LTC4095EDC Pin Definition and Functions
Pin Name Function
1 NTC Battery thermistor input
2 VSEL Battery voltage select (GND=4.1V, Float=4.2V)
3 CHRG Charge status output (open-drain, low=charging)
4 ACPR AC power present output (open-drain)
5 HPWR High power mode (high=500mA USB)
6 CLS Current limit set / system current monitor
7 GND Ground
8 PROG Charge current program (external resistor to GND)
9 BAT Battery connection (charge output)
10 OUT System output (PowerPath)
11 VCC Input supply (USB or wall adapter)
12 SHDN Shutdown (low = charger disabled)
Application Scenarios: In which products and applications is LTC4095EDC used
  • USB smart device: 100mA USB default, 500mA when host permits, 1.2A from wall adapter with seamless PowerPath switchover
  • Portable medical: USB charging with NTC battery temperature qualification, 4.1V float for long cycle life
  • USB peripheral with battery: internal Li-Pol battery charges from USB, PowerPath keeps system running when USB disconnected
  • Handheld instrument: thermal regulation allows maximum safe charge rate in sealed enclosure
Alternative Models: What chips are recommended as replacements for LTC4095EDC
Manufacturer Part Number Package Notes
ADI LTC4095EDE DFN-12 Same device, different reel option
TI BQ24072RGTR VQFN-16 1.5A USB charger with DPPM
ADI LTC4089EDJC DFN-14 USB/wall, 1.5A, Bat-Track
Microchip MCP73837-FCI/UN QFN-20 1.2A USB charger with safety timer

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1