Opens in a new tab

Home » Gate Driver ICs, Integrated Circuits ICs » LTC4366ITS8-2#TRPBF

LTC4366ITS8-2#TRPBF

Floating surge stopper, 9-250V, external N-FET control, adj OV/UV, TSOT-23-8

3796

Effective Inventory

Image for reference only

Manufacturer Part:

LTC4366ITS8-2#TRPBF

Package:

TSOT-23-8 (3.0 x 2.9 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LTC4366ITS8-2#TRPBF from Analog Devices is a floating surge stopper that protects loads from high voltage transients by controlling an external N-channel MOSFET in series with the power path. It operates with supply voltages up to 250V in an 8-pin TSOT-23 package.

Key Specifications

Function Floating Surge Stopper
VIN Operating Range 9V to 250V (with external MOSFET)
Overvoltage Threshold Adjustable via external divider
Gate Drive Current 10uA pull-up, 60mA pull-down
Shutdown Current 7uA
UVLO Threshold 7.5V (typ)
Operating Temperature -40 to 85 C
Package TSOT-23-8

Features

  • Protects loads from high voltage surges up to 250V
  • Controls external N-channel MOSFET as series pass element
  • Adjustable overvoltage and undervoltage thresholds
  • Floating topology allows very high voltage operation
  • Fast gate pull-down (60mA) for rapid disconnect
  • Output current limiting
  • Retry or latch-off fault behavior

Applications

  • Industrial 24V/48V system surge protection
  • Automotive load dump protection
  • Telecom power supply protection
  • Hot-swap and inrush current limiting
  • Avionics power protection
Product Introduction: LTC4366ITS8-2#TRPBF Product Introduction

The LTC4366ITS8-2#TRPBF from Analog Devices is a floating surge stopper that protects loads from high voltage transients by controlling an external N-channel MOSFET in series with the power path. The floating topology allows the device to operate with supply voltages far exceeding its own absolute maximum ratings, up to 250V with an appropriately rated external MOSFET. When the input voltage exceeds the adjustable overvoltage threshold, the LTC4366 pulls down the MOSFET gate with 60mA, rapidly disconnecting the load. Adjustable undervoltage lockout prevents operation below the minimum supply. The -2 variant provides automatic retry after faults clear. The device consumes only 7uA in shutdown mode, making it suitable for always-connected battery systems.

Working Principle: LTC4366ITS8-2#TRPBF Working Principle

The LTC4366ITS8-2#TRPBF operates as a floating surge voltage protector using an external N-channel MOSFET. Key subsystems include: (1) Floating Topology – the device floats on the output side of the external MOSFET, powered through the OUT pin, allowing operation at very high input voltages; (2) Gate Driver – a 10uA current source pulls the MOSFET gate up slowly for controlled turn-on, while a 60mA pull-down provides rapid disconnect during surges; (3) Overvoltage Comparator – monitors the input voltage via an external divider and pulls the gate low when the threshold is exceeded; (4) Undervoltage Lockout – prevents MOSFET turn-on when the supply is below the minimum threshold; (5) Current Limit – monitors the voltage across a sense resistor and limits the MOSFET gate drive during overcurrent conditions; (6) Timer – the -2 variant includes an automatic retry timer that re-attempts connection after a fault.

Pin Description: LTC4366ITS8-2#TRPBF Pin Definition and Functions
Pin Name Type Function
1 OUT Power Output / device supply (floating)
2 GATE Output External N-FET gate drive output
3 UV Input Undervoltage monitor input
4 OV Input Overvoltage monitor input
5 GND Ground Ground connection
6 SHDN Input Shutdown control (active low)
7 SENSE Input Current sense input
8 VCC Power Internal regulator bypass
Application Scenarios: In which products and applications is LTC4366ITS8-2#TRPBF used
  • Industrial 24V/48V system protection against high voltage surges
  • Automotive load dump and ISO 7637 transient protection
  • Telecom -48V power supply overvoltage protection
  • Hot-swap controller with inrush current limiting
  • Avionics 28V DC bus surge protection
Alternative Models: What chips are recommended as replacements for LTC4366ITS8-2#TRPBF
Manufacturer Part Number Package Notes
Analog Devices LTC4366ITS8-1#TRPBF TSOT-23-8 Latch-off on fault
Analog Devices LTC4365ITS8#TRPBF TSOT-23-8 Lower voltage, similar function
Texas Instruments LM5069MM-2/NOPB VSSOP-10 High-side surge stopper
onsemi NIS5452MNT1G DFN-10 Hot-swap controller
Maxim Integrated MAX16141AUB+ MSOP-10 Overvoltage protector

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1