Opens in a new tab

Home » Integrated Circuits ICs » M29W800BB-90N1

M29W800BB-90N1

8Mbit 3V NOR Flash, bottom boot, 90ns, 32-PDIP, industrial temperature, 1MB code storage

6718

Effective Inventory

Image for reference only

Manufacturer Part:

M29W800BB-90N1

Package:

32-PDIP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The M29W800BB-90N1 is an 8Mbit (1MB x 8) 3V supply NOR Flash memory from STMicroelectronics with bottom boot block architecture. This device features 90ns access time and operates from a single 2.7V to 3.6V power supply for read, program, and erase operations. The bottom boot architecture places the boot block and parameter blocks at the low address range, making it suitable for storing system boot code and critical parameters separately from main application firmware. The 90N1 suffix indicates 90ns access time in a 32-pin plastic DIP package.

Key Specifications

Type 3V Boot Block NOR Flash Memory
Memory Size 8 Mbit (1MB / 1,048,576 x 8 bits)
Access Time 90 ns (max)
Supply Voltage 2.7V ~ 3.6V (3.0V nominal)
Architecture Bottom Boot Block
Block Organization 1×16KB + 2×8KB + 1×32KB + 15×64KB
Program Mode Byte program / Write to Buffer
Program Time 10µs/byte typical
Sector Erase Time 0.6s typical
Endurance 100,000 program/erase cycles
Data Retention 10 years minimum
Package 32-Pin Plastic DIP (PDIP)
Operating Temperature -40°C ~ +85°C (Industrial)

Features

  • Single 2.7V-3.6V supply (all operations)
  • 8Mbit density, bottom boot architecture
  • 90ns access time
  • Asynchronous random access
  • Write to Buffer for fast programming
  • Program Suspend and Resume
  • Erase Suspend and Resume
  • Block-level hardware protection
  • Status register (Data Polling, Toggle Bit)
  • Low power consumption
  • Industrial temperature range
  • JEDEC standard command set
  • RoHS compliant 32-DIP package

Applications

  • Boot code storage for embedded systems
  • Industrial microcontroller firmware
  • Telecom and networking equipment
  • Set-top box and digital TV code
  • Automotive body electronics
  • Power supply controllers
  • Medical device firmware
  • Instrumentation and test equipment
Product Introduction: M29W800BB-90N1 Product Introduction

The M29W800BB-90N1 is an 8 megabit (1MB) 3V bottom-boot NOR Flash memory from STMicroelectronics, ideal for boot code and firmware storage in 3V embedded systems. Organized as 1,048,576 bytes with 90ns access time, the device features bottom boot block architecture with a 16KB boot block, two 8KB parameter blocks, one 32KB block, and fifteen 64KB main blocks — all independently erasable. This allows critical boot code and configuration parameters to be stored in dedicated blocks that can be protected from accidental erasure, while application firmware occupies the larger main blocks. The device operates from a single 2.7V to 3.6V supply for all operations — read, program, and erase — eliminating the need for separate high-voltage programming supplies. On-chip charge pumps generate the voltages needed for program and erase operations internally. Advanced features include Write to Buffer (fast multi-byte programming), Program Suspend/Resume, and Erase Suspend/Resume for flexible system design. A status register provides Data Polling and Toggle Bit status bits for monitoring operation progress. The 32-pin plastic DIP package (N1 suffix) provides a through-hole form factor suitable for prototyping, field-upgradeable systems, and applications requiring robust mechanical mounting. Fully specified for the industrial temperature range (-40°C to +85°C) with 100,000 program/erase cycles and 10-year data retention, the M29W800BB-90N1 is widely used in industrial control systems, telecom equipment, automotive electronics, and medical devices.

Working Principle: M29W800BB-90N1 Working Principle

The M29W800BB is a 3V NOR Flash memory that stores data using floating gate technology and provides random access read capability with 90ns address-to-output delay. NOR architecture is particularly suited for code storage because it allows direct random access to any memory location, enabling execute-in-place (XIP) operation where the processor fetches instructions directly from Flash. The bottom boot architecture places the boot block (containing power-on initialization code) at the lowest address range. After reset, most processors begin executing code at address 0, which is within the boot block for bottom-boot devices. The boot block can be hardware-protected to prevent accidental erasure of critical boot code, ensuring the system remains bootable even if a firmware update is interrupted. The memory is divided into 19 blocks of varying sizes: small parameter blocks (8KB, 16KB) for frequently updated configuration data, and larger 64KB blocks for application code. Each block can be erased independently. Read operation is straightforward — apply an address, and the data appears on the output pins after the access time. Program and erase operations are command-driven: writing specific unlock codes followed by a command byte puts the device into the desired operation mode. During programming, the internal state machine handles pulse timing and verification automatically. The Write to Buffer command allows the host to load multiple bytes (up to 32) into a buffer before initiating the program operation, significantly increasing throughput compared to byte-by-byte programming. Program/Erase Suspend allows pausing an operation to service a read request in another block, then resuming — important for systems where the Flash must remain accessible during firmware updates. The status register indicates operation completion, errors, and suspend status.

Pin Description: M29W800BB-90N1 Pin Definition and Functions
Pin Number Pin Name Type Description
1 NC / A18 – / Input No Connect / Address line 18
2-9 A10-A3 Input Address lines 10 through 3
10-17 DQ0-DQ7 I/O Data input/output lines 0 through 7
18 GND Power Ground (0V)
19 A16 Input Address line 16
20 CE# Input Chip Enable (active low)
21-22 A0, A1 Input Address lines 0 and 1
23-29 A2, A4-A9, A17 Input Address lines
30 OE# Input Output Enable (active low)
31 WE# Input Write Enable (active low)
32 VCC Power Power supply (2.7V-3.6V)
Note: Standard 32-pin DIP Flash memory pinout (JEDEC).
Application Scenarios: In which products and applications is M29W800BB-90N1 used
  • Embedded system boot code and BIOS
  • Industrial PLC program memory
  • Telecom equipment firmware storage
  • Set-top box and DTV code
  • Automotive body controllers
  • Digital power supply controllers
  • Medical equipment firmware
  • Test and measurement instruments
Alternative Models: What chips are recommended as replacements for M29W800BB-90N1
Manufacturer Part Number Description
STMicroelectronics M29W800BT-90N1 8Mbit 3V Flash, top boot, 32-DIP
AMD/Spansion AM29LV800BB-90PD 8Mbit 3V Flash, bottom boot, 32-PDIP
Atmel AT49LV8011-90PC 8Mbit 3V Flash, 90ns, 32-DIP
ISSI IS29LV080B-90P 8Mbit 3V Flash, 90ns, 32-DIP

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1