Opens in a new tab

MAG3110FCR1

3-axis magnetometer, +/-1000uT, I2C, DFN-10 2x2mm, -40 to 85C

4817

Effective Inventory

Image for reference only

Manufacturer Part:

MAG3110FCR1

Package:

DFN-10 (2.0×2.0x0.85mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NXP MAG3110FCR1 is a low-power digital 3-axis magnetometer. +/-1000uT range, 0.10uT sensitivity, I2C interface, 80Hz ODR in a 2x2mm DFN-10 package.

Key Specifications

Axes 3 (X, Y, Z)
Range +/-1000 uT (+/-10 Gauss)
Sensitivity 0.10 uT/LSB
Noise 0.25 uVrms (OSR=128)
ODR Up to 80 Hz
Interface I2C (400kHz Fast Mode)
Supply Voltage 1.95V to 3.6V
Current 900 uA typ
Operating Temp -40 to +85C
Package DFN-10 (2.0×2.0x0.85mm)

Features

  • 3-axis digital magnetometer
  • +/-1000uT wide dynamic range
  • 0.10uT high sensitivity
  • Ultra-small 2x2mm DFN-10
  • I2C 400kHz fast mode
  • As low as 8.6uA at low ODR

Applications

  • Electronic compass (eCompass)
  • GPS dead-reckoning assist
  • Location-based services
  • 3D motion control and heading
Product Introduction: MAG3110FCR1 Product Introduction

The MAG3110FCR1 from NXP is a low-power digital 3-axis magnetometer with +/-1000uT measurement range and 0.10uT sensitivity. The I2C interface at 400kHz provides digital output up to 80Hz ODR. Oversampling options reduce noise to 0.25uVrms. The ultra-small 2.0×2.0mm DFN-10 package and 8.6uA low-power mode suit portable and wearable eCompass applications. Combined with an accelerometer, enables tilt-compensated compass heading.

Working Principle: MAG3110FCR1 Working Principle

Three orthogonally-arranged magnetoresistive sensor elements detect the local magnetic field components (Bx, By, Bz). Each element changes resistance in proportion to the applied magnetic field. The resistance change is converted to a digital value by a 12-bit ADC with programmable oversampling (16x max). The digital filter and offset correction are applied before data is stored in output registers accessible via I2C.

Pin Description: MAG3110FCR1 Pin Definition and Functions
Pin Name Description
1 Cap-A Filter cap (analog)
2 VDD 1.95-3.6V supply
3 NC No connect
4 Cap-R Filter cap (regulator)
5-6 GND Ground
7 INT1 Data ready interrupt
8 SDA I2C data
9 VDDIO I/O supply
10 SCL I2C clock
Application Scenarios: In which products and applications is MAG3110FCR1 used
  • Smartphone eCompass
  • GPS dead-reckoning
  • 3D pointer/motion control
Alternative Models: What chips are recommended as replacements for MAG3110FCR1
Model Manufacturer Key Difference
FXOS8700CQR1 NXP 6-axis combo (accel+mag)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1