Opens in a new tab

MAX13054ESA+T

CAN bus protector, ±40V fault, ±25kV ESD, CML filter, 8pF, passive, SOIC-8

4234

Effective Inventory

Image for reference only

Manufacturer Part:

MAX13054ESA+T

Package:

SOIC-8 (3.9 x 4.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX13054ESA+T is a CAN bus protector and filter from Analog Devices (formerly Maxim Integrated) that provides ±40V fault protection, ±25kV ESD protection, and common-mode filter for CAN bus lines in an 8-pin SOIC package.

Key Specifications

Protection Type CAN bus protector + common-mode filter
Fault Protection ±40V on CANH/CANL pins
ESD Protection ±25 kV on CANH/CANL (IEC 61000-4-2)
Capacitance (CANH/CANL) 8 pF typical
Common-Mode Filtering Integrated
Leakage Current ±1 µA max
Supply Voltage Not required (passive)
Operating Temperature -40°C to +125°C
Package SOIC-8 (ESA)

Features

  • ±40V fault protection on CANH and CANL pins
  • ±25 kV ESD protection (IEC 61000-4-2 contact)
  • Integrated common-mode filter for EMC
  • Low 8 pF bus pin capacitance preserves signal integrity
  • No power supply required (passive device)
  • Automotive grade: -40°C to +125°C
  • Pin-compatible upgrade for standard CAN transceivers

Applications

  • Automotive CAN bus protection
  • Industrial CAN networks
  • EMC-compliant CAN bus designs
  • Battery-backed CAN systems
  • Off-board CAN connectors
Product Introduction: MAX13054ESA+T Product Introduction

The MAX13054ESA+T is a CAN bus protector and common-mode filter from Analog Devices that provides robust protection for CAN transceivers against electrical faults and ESD events. It offers ±40V DC fault protection and ±25 kV IEC 61000-4-2 ESD protection on CANH and CANL bus pins, along with integrated common-mode filtering for improved electromagnetic compatibility. The device is passive (no power supply required), adds only 8 pF of capacitance to the bus, and operates over the full automotive temperature range of -40°C to +125°C. It is placed between the CAN transceiver and the bus connector to protect against faults originating from off-board connections.

Working Principle: MAX13054ESA+T Working Principle

The MAX13054 operates as a passive protection and filtering device placed between the CAN transceiver and the physical bus. For fault protection, internal clamping diodes limit the voltage on CANH and CANL to safe levels when exposed to overvoltage conditions up to ±40V. For ESD protection, transient voltage suppression (TVS) structures absorb electrostatic discharge energy up to ±25 kV per IEC 61000-4-2. The integrated common-mode filter uses passive LC structures to attenuate high-frequency common-mode noise that can cause EMC compliance issues, while the 8 pF differential capacitance ensures minimal impact on CAN signal integrity at data rates up to 1 Mbps. The device requires no power supply and draws only ±1 µA leakage current, making it transparent to the bus during normal operation.

Pin Description: MAX13054ESA+T Pin Definition and Functions
Pin Name Type Description
1 CANH-BUS I/O CANH bus side (connects to bus connector)
2 GND Power Ground (connect to chassis/PCB ground)
3 CANL-BUS I/O CANL bus side (connects to bus connector)
4 NC – No connect
5 CANL-TR I/O CANL transceiver side (connects to CAN IC)
6 GND Power Ground
7 CANH-TR I/O CANH transceiver side (connects to CAN IC)
8 NC – No connect
Application Scenarios: In which products and applications is MAX13054ESA+T used
  • Automotive CAN: ±40V fault protection and ±25kV ESD at off-board CAN connectors prevent transceiver damage
  • Industrial CAN: Common-mode filter reduces EMC emissions and improves noise immunity in factory environments
  • Off-Board Connectors: Protection at the point where the CAN bus leaves the PCB, vulnerable to ESD and miswiring
  • Battery-Backup Systems: Passive operation (no supply) ensures protection even during power-down
  • EMC Compliance: Integrated common-mode filter helps pass automotive EMC requirements without external components
Alternative Models: What chips are recommended as replacements for MAX13054ESA+T
Model Manufacturer Key Difference Package Specs
MAX13053ESA+T ADI Without common-mode filter – –
T CAN1042VDRBRQ1 TI CAN transceiver with integrated protection – –
NUP2105LT1G onsemi CAN ESD protection diode, SOT-23 – –
PESD2CAN.215 Nexperia Dual ESD protection for CAN, SOT-23 – –
TLE6250G Infineon CAN transceiver with enhanced ESD – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1