Opens in a new tab

MAX1501ETE+T

Li+/NiMH linear charger, 1.4A prog, thermal reg, OVLO, no ext FET, TQFN-16

4320

Effective Inventory

Image for reference only

Manufacturer Part:

MAX1501ETE+T

Package:

TQFN-16 (4.0 x 4.0 x 0.80 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX1501ETE+T from Maxim Integrated (now Analog Devices) is a highly integrated linear battery charger with thermal regulation for single-cell Li+ and 3-cell NiMH/NiCd batteries. It supports up to 1.4A programmable fast-charge current with overvoltage protection in a 16-pin TQFN package.

Key Specifications

Battery Type 1-cell Li+ or 3-cell NiMH/NiCd
Input Voltage 4.5 V to 13 V (OVLO above 6.5V)
Fast-Charge Current Up to 1.4 A (programmable)
Charge Method CC-CV (Li+), -deltaV/dT (NiMH)
Thermal Regulation +95/+115/+135°C programmable
Safety Timer 3/4.5/6 hours programmable
Top-Off Threshold 10%/20%/30% of fast-charge
No External FET/Diode/Sense Resistor Yes
ACOK Output Yes (active-low)
Charge Status 3 LED outputs
Operating Temperature -40°C to +85°C
Package TQFN-16 (4×4 mm)

Features

  • Integrated linear charger requiring no external FET, diode, or sense resistor
  • 1.4A programmable fast-charge current with CC-CV for Li+ or -deltaV for NiMH
  • Proprietary die temperature regulation at +95/+115/+135°C for thermal management
  • Input overvoltage lockout (OVLO) above 6.5V for adapter protection
  • Charge-current monitor output for fuel gauging

Applications

  • Single-cell Li+ charger for portable devices and PDAs
  • 3-cell NiMH/NiCd charger for digital cameras and power tools
  • USB and wall-adapter powered battery charging systems
Product Introduction: MAX1501ETE+T Product Introduction

The MAX1501ETE+T from Maxim Integrated (now Analog Devices) is a highly integrated linear battery charger with thermal regulation for portable applications. It supports stand-alone single-cell Li+ charging with CC-CV (constant current / constant voltage) termination, and microprocessor-controlled 3-cell NiMH/NiCd charging with -deltaV and dT/dt termination. The integrated power FET eliminates the need for an external MOSFET, reverse-blocking diode, and current-sense resistor, minimizing external component count. The fast-charge current is programmable up to 1.4A via an external resistor. Proprietary die temperature regulation limits the charge current when the die temperature reaches one of three programmable thresholds (+95C, +115C, or +135C), preventing thermal runaway without stopping the charge entirely. Input overvoltage lockout (OVLO) protects the device when the input exceeds 6.5V. Three LED status outputs indicate charging, full, and fault conditions. The charge-current monitor output provides a voltage proportional to the charge current for fuel gauging.

Working Principle: MAX1501ETE+T Working Principle

The MAX1501ETE+T operates as a linear battery charger with integrated thermal management. (1) Li+ Mode: The charger applies constant current (CC) until the battery voltage reaches the 4.2V regulation voltage, then transitions to constant voltage (CV) mode. The current tapers as the battery approaches full charge. When the current drops below the programmable top-off threshold (10%, 20%, or 30% of fast-charge current), charging terminates. (2) NiMH Mode: Under microprocessor control, the charger applies constant current and monitors for -deltaV termination. Temperature and timer-based backup termination ensures safety. (3) Thermal Regulation: When the die temperature reaches the programmed threshold (95/115/135C), the charge current is automatically reduced to prevent further temperature rise. This allows maximum charge rate without thermal shutdown, maintaining some charge current even in high-ambient-temperature conditions. (4) OVLO: When VIN exceeds 6.5V, the charger is disabled to protect against adapter faults. (5) Digital Soft-Start: On power-up, the charge current ramps gradually to limit inrush current and output overshoot.

Pin Description: MAX1501ETE+T Pin Definition and Functions
Pin Name Function
1 DC Adapter power input
2 BATT Battery connection
3 GND Ground
4 CHGEN Charge enable (active low)
5 ACOK Input power detect (active low)
6 THM Thermistor input
7 SETI Charge current set (resistor to GND)
8 ISET Charge current monitor output
Application Scenarios: In which products and applications is MAX1501ETE+T used
  • Single-cell Li+ charger for PDAs, smartphones, and portable devices
  • 3-cell NiMH charger with -deltaV termination for digital cameras
  • USB/wall-adapter charger with thermal regulation and OVLO protection
Alternative Models: What chips are recommended as replacements for MAX1501ETE+T
Manufacturer Part Number Package Notes
ADI MAX8600ETE+T TQFN-16 Similar, different pinout
TI BQ24075RGT QFN-16 1.5A, USB/adapter, similar
Microchip MCP73871T-2CCI/ML QFN-24 1A, USB, battery pack

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1