Opens in a new tab

MAX232ESE+T

Dual RS-232 tx/rx, 5V supply, +/-9V output, charge pump, SOIC-16, 120kbps

4769

Effective Inventory

Image for reference only

Manufacturer Part:

MAX232ESE+T

Package:

SOIC-16 (9.90 x 3.90 x 1.37 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX232ESE+T from Analog Devices (Maxim Integrated) is a dual RS-232 driver/receiver with integrated charge pump in a SOIC-16 package. Operating from a single 5V supply, it generates +/-9V RS-232 levels without external bipolar supplies for serial communication up to 120kbps.

Key Specifications

Transmitters 2
Receivers 2
Data Rate 120 kbps (max)
Supply Voltage 4.5 V to 5.5 V
Output Voltage +/-9 V (typical)
ESD Protection 2 kV HBM
Operating Temperature -40C to +85C

Features

  • Integrated charge pump eliminates need for +/-12V supplies
  • 2 drivers and 2 receivers for full-duplex RS-232 communication
  • +/-9V output swing from single 5V supply
  • 1uF charge pump capacitors (4 external caps required)
  • +/-30V receiver input tolerance for robustness
  • Industry-standard pinout compatible with ICL232 and HIN232

Applications

  • Microcontroller UART to RS-232 serial communication
  • Legacy PC COM port interface circuits
  • Industrial PLC serial communication ports
  • Point-of-sale terminal serial interfaces
Product Introduction: MAX232ESE+T Product Introduction

The MAX232ESE+T from Analog Devices (formerly Maxim Integrated) is a dual RS-232 driver/receiver with integrated charge pump in a SOIC-16 tape-and-reel package. The device operates from a single 4.5V to 5.5V supply and uses an internal charge pump to generate the +/-9V voltage levels required for TIA/EIA-232-F communication, eliminating the need for external bipolar +/-12V supplies. The device includes two transmitter drivers that convert TTL/CMOS logic levels to RS-232 levels, and two receivers that convert RS-232 levels back to TTL/CMOS. The receivers feature 1.3V typical threshold with 0.5V hysteresis for noise immunity, and can accept input voltages up to +/-30V. Only four external 1uF capacitors are required for the charge pump. The device supports data rates up to 120kbps and is compliant with TIA/EIA-232-F and ITU V.28 standards. ESD protection exceeds 2kV HBM per JESD22-A114.

Working Principle: MAX232ESE+T Working Principle

The MAX232ESE+T uses an integrated charge pump to generate bipolar RS-232 voltages from a single 5V supply. (1) Charge Pump: A dual charge pump circuit uses four external 1uF capacitors to generate V+ (approximately +9V) and V- (approximately -9V) from the 5V VCC supply. The first stage doubles VCC to generate V+, and the second stage inverts V+ to generate V-. An internal oscillator drives the charge pump switching at approximately 25kHz. (2) Drivers: Each of the two drivers converts TTL/CMOS input levels (0-5V) to RS-232 output levels (+/-9V). When the driver input is TTL high, the output is approximately -9V (RS-232 space). When the driver input is TTL low, the output is approximately +9V (RS-232 mark). The output slew rate is approximately 4V/us, limiting the maximum data rate to approximately 120kbps while maintaining compliance with RS-232 transition requirements. (3) Receivers: Each receiver converts RS-232 input levels (+/-3V to +/-15V) to TTL/CMOS logic levels (0-5V). The receiver threshold is 1.3V with 0.5V hysteresis, providing noise immunity. The receivers tolerate input voltages up to +/-30V.

Pin Description: MAX232ESE+T Pin Definition and Functions
Pin Name Type Function
1 C1+ Cap Charge pump capacitor 1 positive
2 V+ Power +9V generated supply
3 C1- Cap Charge pump capacitor 1 negative
4 C2+ Cap Charge pump capacitor 2 positive
5 C2- Cap Charge pump capacitor 2 negative
6 V- Power -9V generated supply
7 T2OUT Output Driver 2 RS-232 output
8 R2IN Input Receiver 2 RS-232 input
9 R2OUT Output Receiver 2 TTL output
10 T2IN Input Driver 2 TTL input
11 T1IN Input Driver 1 TTL input
12 R1OUT Output Receiver 1 TTL output
13 R1IN Input Receiver 1 RS-232 input
14 T1OUT Output Driver 1 RS-232 output
15 GND Ground Ground
16 VCC Power +5V supply
Application Scenarios: In which products and applications is MAX232ESE+T used
  • Microcontroller UART to RS-232 serial communication at 120kbps
  • Legacy PC COM port interface circuits with +/-9V output
  • Industrial PLC serial communication ports with 1uF charge pump caps
  • Point-of-sale terminal serial interfaces with +/-30V input tolerance
Alternative Models: What chips are recommended as replacements for MAX232ESE+T
Manufacturer Part Number Package Notes
TI MAX232DR SOIC-16 TI-branded equivalent
ADI MAX202ESE+T SOIC-16 15kV ESD upgrade, 0.1uF caps
TI TRS3232ECDR SOIC-16 3.3V/5V compatible
Exar SP3232EEN-L/TR SOIC-16 3.0-5.5V, low power

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1