Opens in a new tab

MAX3109ETJ+T

Dual UART, 24Mbps, 128-word FIFO, SPI/I2C, TQFN-32, IrDA

3679

Effective Inventory

Image for reference only

Manufacturer Part:

MAX3109ETJ+T

Package:

TQFN-32 (5.0 x 5.0 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX3109ETJ+T from Analog Devices (formerly Maxim Integrated) is an advanced dual-channel UART with 128-word FIFOs in a 32-pin TQFN (5 x 5 mm) package. It bridges SPI/I2C microcontroller buses to asynchronous serial interfaces (RS-485, RS-232, IrDA) with data rates up to 24 Mbps, integrated PLL, and flexible logic-level translation.

Key Specifications

Channels 2 (dual UART)
Max Data Rate 24 Mbps
FIFO Depth 128 words (TX and RX)
Controller Interface SPI (up to 26 MHz) / I2C (up to 1 MHz)
Supply Voltage 1.71V to 3.6V
Shutdown Current 1 µA
GPIOs 8 flexible with 20 mA drive
Operating Temperature -40°C to +85°C
Package TQFN-32 (5 x 5 x 0.75 mm)

Features

  • Dual UART in a single 5 x 5 mm TQFN package
  • 128-word TX and RX FIFOs for each channel
  • SPI up to 26 MHz and I2C Fast Mode Plus up to 1 MHz
  • Integrated PLL and fractional baud-rate generator
  • Automatic RTS/CTS hardware flow control
  • Automatic XON/XOFF software flow control
  • IrDA SIR and MIR encoder/decoder
  • 9-bit multidrop mode and special character detection
  • Logic-level translation on controller and transceiver interfaces
  • Shutdown and auto-sleep power management modes

Applications

  • Automotive infotainment systems
  • Industrial PLCs and PROFIBUS-DP
  • Power meters and smart grid equipment
  • Medical systems and point-of-sale terminals
  • Handheld devices and building automation
Product Introduction: MAX3109ETJ+T Product Introduction

The MAX3109ETJ+T from Analog Devices is an advanced dual SPI/I2C UART, designed to bridge microcontroller buses to asynchronous serial interfaces such as RS-485, RS-232, and IrDA. Each UART channel features 128-word TX and RX FIFOs that significantly offload the host processor. The integrated PLL and fractional baud-rate generator provide high-resolution programmable baud rates up to 24 Mbps. Independent logic-level translation on both controller and transceiver interfaces ensures compatibility between different voltage domains. With automatic hardware and software flow control, 9-bit multidrop mode, and special character detection, this device simplifies serial communication system design.

Working Principle: MAX3109ETJ+T Working Principle

The MAX3109ETJ+T operates as a bridge between a host controller (via SPI or I2C) and two independent asynchronous serial channels. The host writes TX data to the TX FIFO through the SPI/I2C interface, and the UART serializer transmits the data bit-by-bit on the TX pin. Received data on the RX pin is deserialized, checked for errors, and placed in the RX FIFO for the host to read. The fractional baud-rate generator and integrated PLL allow precise baud-rate synthesis from a wide range of reference clocks. The 128-word FIFOs buffer data between the host and serial ports, reducing interrupt frequency. Automatic flow control (RTS/CTS hardware and XON/XOFF software) manages data flow without host intervention. The IrDA encoder/decoder handles SIR and MIR infrared protocols.

Pin Description: MAX3109ETJ+T Pin Definition and Functions
Pin Name Type Function
1 TX0 Output UART0 transmit data
2 RX0 Input UART0 receive data
3 CTS0 Input UART0 clear-to-send input
4 RTS0 Output UART0 request-to-send output
5 GPIO0 I/O General purpose I/O
6 GPIO1 I/O General purpose I/O
7 GPIO2 I/O General purpose I/O
8 GPIO3 I/O General purpose I/O
9 TX1 Output UART1 transmit data
10 RX1 Input UART1 receive data
11 CTS1 Input UART1 clear-to-send input
12 RTS1 Output UART1 request-to-send output
13-16 GPIO4-GPIO7 I/O General purpose I/O
17 IRQ Output Interrupt request output
18 RST Input Reset input (active low)
19 CS/A0 Input SPI chip select / I2C address bit 0
20 MOSI/A1 Input SPI data in / I2C address bit 1
21 MISO/SDA I/O SPI data out / I2C data
22 SCLK/SCL Input SPI clock / I2C clock
23 XIN Input Crystal oscillator input
24 XOUT Output Crystal oscillator output
25-28 VCC/VL/GND Power Supply and ground pins
29 LDOEN Input Internal LDO enable
30-32 VCC/EP Power Supply / exposed pad (GND)
Application Scenarios: In which products and applications is MAX3109ETJ+T used
  • Industrial PLCs and PROFIBUS-DP communication systems
  • Automotive infotainment requiring multiple serial channels
  • Smart grid power meters with RS-485 metering interfaces
  • Medical systems needing isolated serial communication
  • Point-of-sale terminals with multi-port serial connectivity
Alternative Models: What chips are recommended as replacements for MAX3109ETJ+T
Manufacturer Part Number Package Notes
Analog Devices MAX3107ETI+T TQFN-28 Single UART, similar feature set
Analog Devices MAX14830ETI+T TQFN-28 Quad UART, register compatible
NXP SC16IS752IPW TSSOP-28 Dual UART, SPI/I2C, 64-byte FIFO
TI TL16C752CIFN PLCC-44 Dual UART, 64-byte FIFO, parallel interface
Exar XR20M1172IL24 QFN-24 Dual UART, 64-byte FIFO, smaller

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1