Opens in a new tab

Home » Integrated Circuits ICs, Sensors » MAX31865AAP+T

MAX31865AAP+T

RTD-to-digital converter, PT100-PT1000, 15-bit, 0.03125C res, SPI, +/-45V prot, SSOP-20

5893

Effective Inventory

Image for reference only

Manufacturer Part:

MAX31865AAP+T

Package:

SSOP-20 (5.3mm body width)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX31865AAP+T from Analog Devices is an easy-to-use RTD-to-digital converter optimized for platinum RTDs (PT100 to PT1000). It features 15-bit ADC resolution, 0.03125C temperature resolution, SPI interface, and +/-45V input protection in a 20-pin SSOP package.

Key Specifications

Function RTD-to-Digital Converter
RTD Compatibility PT100 to PT1000 (100 to 1000 ohm at 0C)
Wire Configurations 2-wire, 3-wire, 4-wire
ADC Resolution 15 bits
Temperature Resolution 0.03125C (nominal)
Total Accuracy 0.5C max (0.05% of FS)
Conversion Time 21ms (max)
Interface SPI-compatible
Supply Voltage 3.0V to 3.6V
Input Protection +/-45V
Operating Temperature -40 to 125 C

Features

  • Complete RTD measurement solution with fault detection
  • 15-bit ADC resolution with 0.03125C temperature resolution
  • Compatible with 2-, 3-, and 4-wire RTD connections
  • Programmable fault detection for open/short RTD conditions
  • +/-45V input protection on RTD inputs
  • Fully differential VREF inputs
  • SPI-compatible serial interface
  • External reference resistor sets sensitivity

Applications

  • Industrial temperature measurement
  • Medical equipment temperature monitoring
  • Instrumentation and calibration
  • Process control systems
  • HVAC temperature sensing
Product Introduction: MAX31865AAP+T Product Introduction

The MAX31865AAP+T from Analog Devices is an easy-to-use resistance-to-digital converter optimized for platinum resistance temperature detectors (RTDs). An external precision resistor sets the sensitivity for the specific RTD being used, and a precision delta-sigma ADC converts the ratio of the RTD resistance to the reference resistance into digital form. The device supports PT100 to PT1000 RTDs (100 ohm to 1000 ohm at 0C) and is compatible with 2-wire, 3-wire, and 4-wire sensor connections. With 15-bit ADC resolution, the nominal temperature resolution is 0.03125C, and total accuracy is 0.5C (0.05% of full scale) over all operating conditions. The RTD inputs are protected against overvoltage faults as large as +/-45V. Programmable detection of RTD and cable open and short conditions simplifies system diagnostics. The MAX31865 communicates via an SPI-compatible interface and is available in a 20-pin SSOP package rated for -40 to 125 C operation.

Working Principle: MAX31865AAP+T Working Principle

The MAX31865AAP+T operates as a precision resistance-to-digital converter optimized for RTD measurement. Key subsystems include: (1) Excitation Current Source – a precision current source drives the RTD and reference resistor in a ratiometric configuration; the ratio measurement cancels current source errors; (2) Delta-Sigma ADC – a 15-bit delta-sigma converter measures the ratio of RTD voltage to reference voltage, providing a direct resistance ratio output; (3) SPI Interface – a 4-wire SPI interface (SCLK, CS, SDI, SDO) provides read/write access to configuration, fault, and data registers; (4) Fault Detection – programmable thresholds detect open RTD element, RTD shorted to out-of-range voltage, or short across RTD element; fault status is available in a register; (5) Input Protection – ESD and overvoltage clamps protect the RTD input pins against faults up to +/-45V; (6) Reference Resistor – an external precision resistor (typically 0.1% tolerance or better) sets the measurement range and sensitivity.

Pin Description: MAX31865AAP+T Pin Definition and Functions
Pin Name Type Function
1 VGND Power Ground
2 RTDIN+ Input RTD positive input
3 RTDIN- Input RTD negative input
4 REFIN+ Input Reference resistor positive input
5 REFIN- Input Reference resistor negative input
6-8 NC – No connect
9 RDY Output Conversion ready (active low)
10 CS Input SPI chip select (active low)
11 SDI Input SPI data input
12 SDO Output SPI data output
13 SCLK Input SPI clock
14-16 BIAS/DRDY/NC Mixed Bias, data ready, no connect
17-20 FORC+/FORC-/VDD/NC Mixed Force inputs, supply, no connect
Application Scenarios: In which products and applications is MAX31865AAP+T used
  • Industrial temperature measurement: high-accuracy PT100/PT1000 RTD reading for process control
  • Medical equipment: precision body temperature monitoring with 4-wire RTD configuration
  • Instrumentation: laboratory-grade temperature measurement with 0.03125C resolution
  • Process control: temperature monitoring in chemical and food processing
  • HVAC: building automation temperature sensing with fault detection for sensor wiring
Alternative Models: What chips are recommended as replacements for MAX31865AAP+T
Manufacturer Part Number Package Notes
TI LTC2983CLX#PBF LQFP-48 Multi-sensor, universal temp measurement
Maxim MAX31865ATP+T TQFN-20 Same device, LFCSP package
TI ADS1220IPWR TSSOP-16 24-bit ADC for RTD, more flexible
Analog Devices AD7124-4BCPZ LFCSP-24 24-bit, multi-channel RTD ADC
Microchip MCP3561R-E/ST TSSOP-20 24-bit delta-sigma for RTD

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1