Opens in a new tab

MAX3232ECPWR

3-5.5V dual RS-232 transceiver, 250kbps, +/-15kV IEC ESD, TSSOP-16

3824

Effective Inventory

Image for reference only

Manufacturer Part:

MAX3232ECPWR

Package:

TSSOP-16 (PW) 5.00 x 4.40 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX3232ECPWR from Texas Instruments is a 3V to 5.5V dual-channel RS-232 line driver/receiver with +/-15kV IEC ESD protection. It features two drivers and two receivers, operates at data rates up to 250 kbps, and requires only four 0.1uF external capacitors. Housed in a 16-pin TSSOP (PW) package, it provides reliable serial communication interface with enhanced ESD protection.

Key Specifications

Supply Voltage 3V to 5.5V
Drivers / Receivers 2 / 2
Data Rate Up to 250 kbps
ESD Protection +/-15kV HBM, +/-8kV IEC contact, +/-15kV IEC air-gap
Supply Current 300 uA (typical)
External Capacitors 4 x 0.1 uF
Driver Output Slew Rate 30 V/us max
Operating Temperature 0°C to +70°C
Package TSSOP-16 (PW), 5.00 x 4.40 mm

Features

  • +/-15kV IEC ESD protection on all RS-232 bus pins
  • Meets TIA/EIA-232-F and ITU V.28 standards
  • 3V to 5.5V single supply operation with integrated charge pump
  • 250 kbps data rate with 30 V/us max slew rate
  • Low 300 uA supply current
  • Accepts 5V logic input with 3.3V supply
  • Pin compatible with industry-standard MAX232

Applications

  • Battery-powered RS-232 communication systems
  • Industrial automation and control interfaces
  • Point-of-sale terminals and modems
  • Notebook and palmtop computer serial ports
  • Embedded system debug UART interfaces
Product Introduction: MAX3232ECPWR Product Introduction

The MAX3232ECPWR is a dual-channel RS-232 line driver and receiver from Texas Instruments with enhanced +/-15kV IEC ESD protection. The device consists of two line drivers, two line receivers, and a dual charge-pump circuit. It meets the requirements of TIA/EIA-232-F and provides the electrical interface between asynchronous communication controllers and serial-port connectors. The integrated charge pump and four small 0.1uF external capacitors enable operation from a single 3V to 5.5V supply. The device operates at data rates up to 250 kbps and is pin-compatible with the industry-standard MAX232 device.

Working Principle: MAX3232ECPWR Working Principle

The MAX3232ECPWR uses an internal dual charge-pump circuit to generate the +/-5.5V voltage rails required for RS-232 compliant output levels from a single 3V to 5.5V supply. The charge pump uses four external 0.1uF capacitors for voltage doubling and inversion. The driver circuits convert TTL/CMOS logic levels to RS-232 compliant voltage levels (+/-5V to +/-7V), while the receivers convert RS-232 input signals back to TTL/CMOS logic levels. All RS-232 bus pins incorporate enhanced ESD protection structures rated at +/-15kV using IEC 61000-4-2 air-gap discharge and +/-8kV contact discharge.

Pin Description: MAX3232ECPWR Pin Definition and Functions
Pin Name Type Function
1 C1+ — Positive lead of C1 capacitor
2 V+ Output Positive charge pump output
3 C1- — Negative lead of C1 capacitor
4 C2+ — Positive lead of C2 capacitor
5 C2- — Negative lead of C2 capacitor
6 V- Output Negative charge pump output
7 DOUT2 Output RS-232 driver 2 output
8 RIN2 Input RS-232 receiver 2 input
9 ROUT2 Output Logic receiver 2 output
10 DIN2 Input Logic driver 2 input
11 DIN1 Input Logic driver 1 input
12 ROUT1 Output Logic receiver 1 output
13 RIN1 Input RS-232 receiver 1 input
14 DOUT1 Output RS-232 driver 1 output
15 GND Ground Ground
16 VCC Power Supply voltage (3V to 5.5V)
Application Scenarios: In which products and applications is MAX3232ECPWR used
  • Industrial automation: RS-232 communication interface for PLCs and motor drives with robust ESD protection
  • Embedded systems: Debug UART interface converting MCU logic levels to RS-232 for terminal access
  • Point-of-sale terminals: Serial port for barcode scanners, receipt printers and cash drawers
  • Battery-powered devices: Low 300uA supply current enables portable RS-232 communication
  • Modems and networking: RS-232 interface for legacy communication equipment
Alternative Models: What chips are recommended as replacements for MAX3232ECPWR
Manufacturer Part Number Package Notes
TI MAX3232CPWR TSSOP-16 Without IEC ESD enhancement
TI SN65C3232EPWR TSSOP-16 High-speed 1Mbps, -40 to 85°C
TI MAX3221ECPWR TSSOP-16 1 driver/1 receiver, auto-powerdown
ADI ADM3202ARNZ TSSOP-16 +/-15kV ESD, 3.3V, pin compatible
MaxLinear SP3232ECY-L/TR TSSOP-16 +/-15kV ESD, 250kbps

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1