Opens in a new tab

MAX485ECSA+

RS-485/RS-422 transceiver, 2.5Mbps, ±15kV ESD, 5V, half-duplex, SOIC-8

14027

Effective Inventory

Image for reference only

Manufacturer Part:

MAX485ECSA+

Package:

SOIC-8 (4.9 x 3.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The Maxim Integrated (now Analog Devices) MAX485ECSA+ is a low-power RS-485/RS-422 transceiver with ±15 kV ESD protection, operating from a single 5 V supply. Packaged in an SOIC-8, it supports data rates up to 2.5 Mbps in half-duplex mode with slew-rate-unlimited outputs, and is designed for harsh-environment industrial communication networks.

Key Specifications

Interface RS-485 / RS-422
Data Rate 2.5 Mbps
Supply Voltage 4.75 V to 5.25 V
ESD Protection ±15 kV (HBM)
Quiescent Current 300 µA (typical)
Package SOIC-8

Features

  • ±15 kV ESD protection on all bus pins
  • 2.5 Mbps data rate (slew rate unlimited)
  • Half-duplex operation with driver/receiver enable
  • Low quiescent current: 300 µA typical
  • -7 V to +12 V common-mode input range
  • Current limiting and thermal shutdown protection

Applications

  • RS-485 industrial communication networks
  • RS-422 point-to-point links
  • Level translators for EMI-sensitive environments
  • Building automation and HVAC controls
  • Programmable logic controller (PLC) interfaces
Product Introduction: MAX485ECSA+ Product Introduction

The MAX485ECSA+ from Maxim Integrated (now part of Analog Devices) is a low-power RS-485/RS-422 transceiver with ±15 kV ESD protection on driver outputs and receiver inputs. Operating from a single 5 V supply, it supports data rates up to 2.5 Mbps in half-duplex configuration. The device features driver enable (DE) and receiver enable (/RE) pins for flexible bus control, current limiting and thermal shutdown for driver overload protection, and a wide -7 V to +12 V common-mode input range for robust operation in noisy industrial environments.

Working Principle: MAX485ECSA+ Working Principle

The MAX485ECSA+ integrates a differential driver and a differential receiver on a single chip, sharing the bus pins (A and B) for half-duplex communication. The driver converts TTL/CMOS logic levels at the DI input into differential signals on the A and B bus lines. The receiver converts differential signals from the bus back to single-ended logic at the RO output. The DE (driver enable) and /RE (receiver enable) pins control the direction of data flow: when DE is high and /RE is low, the device transmits; when DE is low and /RE is low, the device receives. Both the driver and receiver enter high-impedance states when disabled, allowing multiple transceivers to share the same bus. The ±15 kV ESD protection is implemented through on-chip transient voltage suppression structures on all bus-facing pins.

Pin Description: MAX485ECSA+ Pin Definition and Functions
Pin Name Type Function
1 RO Output Receiver output
2 /RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 DI Input Driver data input
5 GND Power Ground
6 A I/O Non-inverting receiver input / driver output
7 B I/O Inverting receiver input / driver output
8 VCC Power Supply voltage (+5V)
Application Scenarios: In which products and applications is MAX485ECSA+ used
  • Modbus RTU communication over RS-485 in factory automation
  • DMX512 lighting control protocol transceiver
  • Building automation BACnet MS/TP networks
  • Solar inverter monitoring and control interfaces
  • Point-to-point RS-422 serial links up to 1200m
Alternative Models: What chips are recommended as replacements for MAX485ECSA+
Manufacturer Part Number Speed ESD Notes
TI SN75176BDR 2.5 Mbps ±8 kV Pin-compatible, lower ESD
Maxim MAX3485ECSA+ 10 Mbps ±15 kV 3.3V version
ADI ADM485EARZ 2.5 Mbps ±15 kV Equivalent from ADI
onsemi NB6L14MNSTTG 250 Mbps ±4 kV High-speed LVDS alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1