Opens in a new tab

MAX485ESA+T

RS-485/RS-422 half-duplex transceiver, 2.5Mbps, ±15kV ESD, 32 nodes, SOIC-8

4457

Effective Inventory

Image for reference only

Manufacturer Part:

MAX485ESA+T

Package:

SOIC-8 / NSOIC-8 (3.9 x 4.9 x 1.25mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX485ESA+T from Analog Devices (Maxim Integrated) is a low-power, slew-rate-unlimited RS-485/RS-422 transceiver in an SOIC-8 package. It contains one driver and one receiver for half-duplex communication at up to 2.5Mbps, with ±15kV ESD protection on the bus pins, thermal shutdown, and short-circuit current limiting.

Key Specifications

Interface RS-485 / RS-422
Duplex Half-Duplex
Number of Drivers/Receivers 1 / 1
Data Rate 2.5Mbps
Supply Voltage 4.75V to 5.25V (5V nominal)
Quiescent Current 300μA to 500μA
Shutdown Current 0.1μA (MAX481/483/487)
Number of Nodes 32 (1/8 unit load)
Receiver Input Resistance 96kΩ (1/8 unit load)
Differential Output Voltage 1.5V min (RL=54Ω)
ESD Protection ±15kV HBM (bus pins)
Bus Fault Tolerance ±15V on A/B pins
Package SOIC-8 (3.9 x 4.9mm)
Operating Temperature -40°C to +85°C

Features

  • 2.5Mbps data rate (unlimited slew rate)
  • Half-duplex operation with driver and receiver enable
  • Low quiescent current: 300μA to 500μA
  • ±15kV ESD protection on bus pins
  • Short-circuit current limited driver output
  • Thermal shutdown protection
  • Receiver fail-safe for open-circuit input
  • 1/8 unit load: up to 32 transceivers on the bus
  • Single 5V supply
  • Driver and receiver independently enabled

Applications

  • Industrial control local area networks
  • Low-power RS-485 transceivers
  • Level translators
  • EMI-sensitive applications
  • RS-422 communication links
Product Introduction: MAX485ESA+T Product Introduction

The MAX485ESA+T from Analog Devices (Maxim Integrated) is a low-power RS-485/RS-422 transceiver containing one driver and one receiver in a compact SOIC-8 package. With an unlimited slew rate driver, it supports data rates up to 2.5Mbps for half-duplex communication. The driver output features short-circuit current limiting and thermal shutdown protection, while the receiver includes a fail-safe feature guaranteeing a logic-high output when the input is open-circuit. The device supports up to 32 transceivers on a single bus with 1/8 unit load input impedance.

Working Principle: MAX485ESA+T Working Principle

The MAX485ESA+T integrates a differential driver and a differential receiver with independent enable controls (DE for driver, /RE for receiver). The driver converts single-ended TTL/CMOS logic to differential RS-485 signals on the A and B bus pins. The receiver converts the differential bus signal back to single-ended logic on the RO pin. In half-duplex mode, only the driver or receiver is active at a time, controlled by DE and /RE pins. When both are disabled, the device enters a low-power shutdown mode. The fail-safe receiver ensures a defined high output state when the bus is idle or floating.

Pin Description: MAX485ESA+T Pin Definition and Functions
Pin Name Type Function
1 RO Output Receiver output
2 /RE Input Receiver output enable (active low)
3 DE Input Driver output enable (active high)
4 DI Input Driver data input
5 GND Power Ground
6 A I/O Non-inverting receiver input / driver output
7 B I/O Inverting receiver input / driver output
8 VCC Power Supply voltage (5V)
Application Scenarios: In which products and applications is MAX485ESA+T used
  • Industrial RS-485 network transceivers for Modbus/Profibus
  • Low-power RS-422 point-to-point communication links
  • Level translation between TTL logic and RS-485 bus
  • EMI-sensitive long-distance data transmission
  • Building automation and HVAC bus communication
Alternative Models: What chips are recommended as replacements for MAX485ESA+T
Manufacturer Part Number Package Notes
ADI/Maxim MAX485CSA+T SOIC-8 Non-ESD version, same function
TI SN65HVD75DR SOIC-8 3.3V/5V RS-485, 12Mbps
TI SP3485EN-L/TR SOIC-8 3.3V low-power RS-485
Renesas ISL83485IBZ SOIC-8 3.3V/5V RS-485 transceiver
onsemi AM26LV32IDR SOIC-8 RS-422 quad receiver

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1