Opens in a new tab

MAX9918ASA+T

Current-sense amp, -20V to +75V CM, pin-select gain 50/100/200, 300uV Vos, SOIC-8

6077

Effective Inventory

Image for reference only

Manufacturer Part:

MAX9918ASA+T

Package:

SOIC-8 (4.90 x 3.91 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX9918ASA+T from Analog Devices (Maxim) is a single-supply current-sense amplifier with -20V to +75V wide common-mode input range in a SOIC-8 package. Operating from 2.7V to 5.5V supply, it amplifies small sense resistor voltages for battery current monitoring, motor current sensing, and power management.

Key Specifications

Common-Mode Range -20 V to +75 V
Supply Voltage 2.7 V to 5.5 V
Gain Options 50 V/V, 100 V/V, 200 V/V (pin-select)
BW (Gain=50) 220 kHz
Input Offset 300 uV (max)
Operating Temperature -40C to +125C

Features

  • Wide -20V to +75V common-mode range for high-side and low-side sensing
  • Pin-selectable gain (50x, 100x, 200x) eliminates external resistors
  • 300uV max input offset voltage for precision measurement
  • Works below supply rail (negative CM) for battery monitoring

Applications

  • Battery current monitoring in automotive and industrial
  • Motor current sensing for H-bridge drive
  • Power supply current monitoring
  • Solar panel and fuel cell monitoring
Product Introduction: MAX9918ASA+T Product Introduction

The MAX9918ASA+T from Analog Devices (Maxim) is a high-side/low-side current-sense amplifier with an exceptionally wide -20V to +75V common-mode input range, far exceeding the supply voltage. Operating from a 2.7V to 5.5V single supply, it amplifies the small voltage across a sense resistor with pin-selectable gains of 50, 100, or 200 V/V. The 300uV max input offset voltage enables accurate measurement of small sense voltages. The ability to operate with common-mode voltages below ground makes it suitable for battery monitoring where the sense resistor may be at negative potential. Bandwidth is 220kHz at gain of 50.

Working Principle: MAX9918ASA+T Working Principle

The MAX9918ASA+T uses a precision differential amplifier with level-shifting input stage. (1) Level Shifting: The input stage uses a high-voltage matched resistor network to attenuate and level-shift the common-mode voltage. This allows the differential amplifier to process signals with -20V to +75V common-mode while operating from a 2.7-5.5V supply. (2) Differential Amplification: The differential voltage across the sense resistor (RS) is amplified by the selected gain. Gain is set by connecting the GSEL pin to GND (50x), floating (100x), or VCC (200x). (3) Output: The output voltage is VOUT = VREF + (ISENSE x RS x GAIN), where VREF is the reference voltage applied to the REF pin. This allows bidirectional current measurement with VREF set to VCC/2. (4) Protection: Input pins are protected against overvoltage and reverse polarity, surviving brief connection to 80V without damage.

Pin Description: MAX9918ASA+T Pin Definition and Functions
Pin Name Type Function
1 RS+ Input Positive sense input
2 RS- Input Negative sense input
3 GSEL Input Gain select (GND=50, float=100, VCC=200)
4 GND Ground Ground
5 REF Input Reference voltage for bidirectional output
6 OUT Output Amplified output voltage
7 VCC Power Supply (2.7-5.5V)
8 NC – No connect
Application Scenarios: In which products and applications is MAX9918ASA+T used
  • Automotive battery current monitoring with -20V to +75V common-mode range
  • Motor H-bridge current sensing for torque control and protection
  • Power supply output current monitoring with bidirectional measurement
  • Solar panel and fuel cell current monitoring with negative CM support
Alternative Models: What chips are recommended as replacements for MAX9918ASA+T
Manufacturer Part Number Package Notes
TI INA282AIDR SOIC-8 -16V to +80V CM, 50x gain
Analog Devices AD8216BRMZ MSOP-8 -2V to +65V CM, gain=3
onsemi NCS21xR TSOT-23-6 0-26V CM, tiny package
TI INA240A1DR SOIC-8 -4V to +80V, enhanced PWM reject

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1