Opens in a new tab

MC14489BPE

5-digit 7-seg LED driver, SPI, hex decode, DIP-16

5804

Effective Inventory

Image for reference only

Manufacturer Part:

MC14489BPE

Package:

DIP-16 (19.3 x 6.35 x 5.08 mm), through-hole

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC14489BPE from NXP (formerly Motorola/Freescale) is a 5-bit LED direct display driver with serial interface in a 16-pin DIP package. It directly drives up to 5 digits of 7-segment LEDs (plus decimal points) from a microcontroller’s SPI port, with internal decode logic for hexadecimal digits, simplifying LED display interfaces in embedded systems.

Key Specifications

Function 5-digit 7-segment LED display driver
Number of Digits 5 (7-segment + decimal point each)
Interface SPI-compatible serial (Data In, Clock, Enable)
Data Bits 24-bit shift register (8-bit control + 16-bit data)
Segment Current Up to 35mA per segment (externally set)
Display Decode Hex (0-F), plus special characters
Supply Voltage 4.5V to 6V
Supply Current 3 mA typical (no load)
Data Clock Rate Up to 4 MHz
Segment Drivers 7 segments (a-g) + 1 decimal point per digit
Digit Drivers 5 digit selects (multiplexed)
Operating Temperature -40 to +85 C
Package DIP-16 (19.3 x 6.35 mm), through-hole
Status Active (NXP)

Features

  • Drives 5 digits of 7-segment LED displays directly
  • SPI-compatible serial interface (3-wire)
  • Internal hex decoder (0-F plus special chars)
  • No external resistors needed (current set internally)
  • Multiplexed drive reduces pin count
  • 24-bit shift register for control and data
  • Brightness control via bank current setting
  • Decimal point control per digit
  • DIP-16 through-hole package

Applications

  • Embedded system LED display panels
  • Industrial instrument readouts
  • Temperature and voltage displays
  • Point-of-sale terminal displays
Product Introduction: MC14489BPE Product Introduction

The MC14489BPE from NXP (originally Motorola, then Freescale) is a 5-digit 7-segment LED display driver with SPI-compatible serial interface in a 16-pin DIP package. The B denotes the revised version with improved features, P denotes DIP package, and E denotes the plastic package. The device directly drives up to 5 digits of common-cathode 7-segment LED displays (plus decimal points) without requiring external current-limiting resistors or transistor drivers. A 24-bit shift register receives display data and control bits from the host microcontroller via a 3-wire SPI interface (Data In, Clock, Enable). The internal decode logic converts 4-bit hex nibbles (0-F) into 7-segment patterns, plus supports special characters (H, L, P, dash, blank). The display is multiplexed at a rate fast enough to appear flicker-free (typically 500Hz), scanning through the 5 digits sequentially. Segment current is set by an external resistor on the ISET pin, with all segments drawing from a single current source that is directed to the active digit. The control byte configures display blanking, individual decimal points, and bank current. The MC14489B eliminates the need for 7-segment decoder ICs, transistor drivers, and current-limiting resistors, significantly reducing component count in LED display designs.

Working Principle: MC14489BPE Working Principle

The MC14489BPE operates through four subsystems: (1) Serial Interface: The host microcontroller sends 24 bits of data (8-bit control + 16-bit display data) through the Data In pin, clocked by the Clock pin. The Enable pin latches the data when brought high. The 24 bits are shifted into an internal shift register and then transferred to the display latch. (2) Hex Decoder: Each 4-bit nibble of the 16 display data bits selects a display character from the internal lookup table. The 16 entries cover digits 0-9 and hex characters A-F, plus the device supports additional special characters (H, L, P, J, U, Y, minus, blank) through the control byte. (3) Multiplexed Drive: The device activates one digit at a time by pulling the corresponding digit select pin low (common cathode). The internal current source drives the appropriate segment outputs (a-g + dp) for that digit. The scan rate is determined by an internal oscillator, typically cycling through all 5 digits at about 500Hz, which is fast enough for persistence of vision. (4) Current Control: A single external resistor on the ISET pin sets the peak segment current for all segments. The resistor value is calculated as R = 700 / Idesired. For 20mA per segment, R = 700/0.020 = 35kOhm. The current source ensures uniform brightness across all segments and digits.

Pin Description: MC14489BPE Pin Definition and Functions
Pin Name Type Description
1 f Output Segment f driver
2 dp Output Decimal point driver
3 EN Input Enable (active low during shift, high latches)
4 g Output Segment g driver
5 e Output Segment e driver
6 d Output Segment d driver
7 DATA IN Input Serial data input
8 VSS Power Ground
9 CLOCK Input Serial clock input
10 c Output Segment c driver
11 b Output Segment b driver
12 a Output Segment a driver
13 D1 Output Digit 1 select (common cathode)
14 D2 Output Digit 2 select
15 D3 Output Digit 3 select
16 VDD Power Positive supply (4.5-6V)
Application Scenarios: In which products and applications is MC14489BPE used
  • 5-digit temperature display driven by SPI from MCU, showing -40.0 to 150.0C with hex-to-7-segment decode and single 35kOhm ISET resistor for 20mA segments
  • Industrial voltage meter with 4 digits plus sign using MC14489B for direct LED drive, reducing component count from 7 decoder/driver ICs to one chip
  • Point-of-sale price display with 5 digits, decimal point control, and brightness adjustment via ISET resistor in a compact DIP-16 through-hole design
  • Clock/timer display with 4 digits (HH:MM) and colon using special character decode, multiplexed at 500Hz for flicker-free operation
Alternative Models: What chips are recommended as replacements for MC14489BPE
Model Manufacturer Digits Interface Notes
MAX7219CNG ADI/Maxim 8 SPI 8-digit, cascading
ALE7221B Allegro 4 SPI 4-digit, lower pin count
HT16K33-28SOP Holtek 16×8 I2C Matrix driver, 128 LEDs
MC14489BDW NXP 5 SPI SOIC-16 SMD version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1