Opens in a new tab

MC1458DR

Dual general-purpose op amp, μA741 equivalent per channel, ±15V, 8-SOIC

7988

Effective Inventory

Image for reference only

Manufacturer Part:

MC1458DR

Package:

8-Pin SOIC (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC1458DR is an onsemi/TI dual general-purpose bipolar operational amplifier with each half electrically similar to the uA741. It features 1MHz GBW, 0.5V/us slew rate, +/-12V common-mode range, internal frequency compensation, and short-circuit protection. Packaged in 8-SOIC, 0C to +70C.

Key Specifications

Channels 2
GBW 1 MHz
Slew Rate 0.5 V/us
Vos (max) 6 mV
Ib (max) 500 nA
Supply Range +/-5V to +/-15V
Supply Current 3.4 mA typ (both)
Output Swing +/-12V min (RL=10k)
CMRR 90 dB typ
Package 8-SOIC

Features

  • Dual op amp, each half similar to uA741
  • Internal frequency compensation (no external caps)
  • Short-circuit protected outputs
  • Wide common-mode and differential voltage range
  • No latch-up
  • Low power consumption
  • 120 dB crosstalk attenuation between channels

Applications

  • Audio preamplifiers and mixers
  • Instrumentation and signal conditioning
  • Active filters and integrators
  • Control systems and servo loops
Product Introduction: MC1458DR Product Introduction

The MC1458DR is an onsemi dual general-purpose operational amplifier in an 8-SOIC package, providing two independent op-amp channels with electrical characteristics equivalent to the industry-standard μA741. Each channel features a 1 MHz gain-bandwidth product and 0.5 V/μs slew rate, suitable for a wide range of analog signal conditioning applications. The device operates from dual supplies up to ±15V with internal frequency compensation, requiring no external components for stability in unity-gain configurations. The output stage provides short-circuit protection, limiting output current to approximately ±25 mA under fault conditions. The MC1458DR is pin-compatible with the LM1458, LM1558, and other industry-standard dual op-amps, enabling easy substitution in existing designs.

Working Principle: MC1458DR Working Principle

The MC1458DR operates as two independent high-gain voltage amplifiers with internal frequency compensation. Each channel compares the voltage difference between its inverting and non-inverting inputs, amplifying this differential signal by the open-loop gain (typically 100 dB). The internal compensation capacitor (typically 30 pF) ensures stability in unity-gain configurations without requiring external compensation components. The input stage uses a differential pair with constant-current tail bias, providing high common-mode rejection (90 dB typical). The output stage is a Class-AB push-pull configuration with short-circuit current limiting to approximately ±25 mA, protecting against output overload conditions.

Pin Description: MC1458DR Pin Definition and Functions
Pin Mnemonic Description
1 1OUT Channel 1 Output
2 1IN- Channel 1 Inverting Input
3 1IN+ Channel 1 Non-inverting Input
4 V- Negative Supply Voltage
5 2IN+ Channel 2 Non-inverting Input
6 2IN- Channel 2 Inverting Input
7 2OUT Channel 2 Output
8 V+ Positive Supply Voltage
Application Scenarios: In which products and applications is MC1458DR used
  • Active filter circuits in audio and instrumentation systems requiring dual op-amp channels
  • Signal conditioning for sensor interfaces in industrial control with ±15V supply
  • Summing amplifiers and integrators in analog computing with internal compensation
  • Buffer amplifiers for impedance matching in data acquisition systems
  • Oscillator circuits for signal generation in test and measurement equipment
Alternative Models: What chips are recommended as replacements for MC1458DR
Model Manufacturer Key Difference
LM358DR TI Dual, single-supply, low cost
TL072CDR TI Dual JFET input, lower Ib, 3 MHz GBW
NE5532DR onsemi Dual, low noise, audio-optimized
RC4558DR TI Dual, pin-compatible, 3 MHz GBW

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1