Opens in a new tab

MC34063ADR2G

1.5A DC-DC controller, boost/buck/invert, 3-40V, 100kHz, SOIC-8

13400

Effective Inventory

Image for reference only

Manufacturer Part:

MC34063ADR2G

Package:

SOIC-8 (4.9 x 3.9 x 1.5mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC34063ADR2G is a 1.5A DC-DC converter control circuit from onsemi that implements step-up, step-down, and inverting topologies with adjustable output in an SOIC-8 package.

Key Specifications

Input Voltage Range 3V to 40V
Output Switch Current 1.5A (peak)
Switching Frequency up to 100kHz (adjustable)
Output Voltage Adjustable (set by external resistors)
Reference Voltage 1.25V (2% accuracy)
Switch Saturation Voltage 1.0V typical at 1.5A (Darlington)
Supply Current 2.5mA typical
Duty Cycle Range 0% to 100% (voltage mode)
Operating Temperature -40°C to +85°C
Package SOIC-8 (4.9 x 3.9mm)

Features

  • Supports step-up, step-down, and voltage-inverting topologies
  • 1.5A peak output switch current (internal Darlington)
  • Adjustable switching frequency via timing capacitor
  • Precision 1.25V reference voltage (2% accuracy)
  • Current-limiting via external sense resistor
  • Low 2.5mA quiescent supply current
  • Only 5 external components needed for basic converter
  • Wide 3V to 40V input voltage range

Applications

  • Step-up (boost) voltage converters
  • Step-down (buck) voltage converters
  • Voltage-inverting converters
  • Battery-powered DC-DC converters
  • Automotive and industrial power supplies
Product Introduction: MC34063ADR2G Product Introduction

The MC34063ADR2G is a monolithic DC-DC converter control circuit from onsemi that contains all the active functions required for step-up, step-down, and voltage-inverting switching converter applications. The device integrates a 1.5A Darlington output switch, oscillator, voltage reference, and comparator in an SOIC-8 package. The switching frequency is set by an external timing capacitor, operating up to 100kHz. The output voltage is set by an external resistor divider referenced to the internal 1.25V precision reference. Current limiting is achieved through an external sense resistor in series with the switch, providing overload protection. With only 5 external components needed for a basic converter, the MC34063A offers one of the simplest and most cost-effective DC-DC converter solutions available.

Working Principle: MC34063ADR2G Working Principle

The MC34063ADR2G uses a fixed-frequency, variable-duty-cycle control scheme. The internal oscillator generates a timing waveform at a frequency determined by the external capacitor on the CT pin (typically 33kHz to 100kHz). During the on-time, the internal Darlington output switch (between pins 1, 2 and 3) conducts, storing energy in the external inductor. During the off-time, the inductor releases stored energy to the output through the external catch diode. The comparator monitors the output voltage via the comparator inverting input (pin 5) and compares it with the 1.25V reference. When the output voltage is below the setpoint, the comparator enables the oscillator output, allowing the switch to toggle. When the output exceeds the setpoint, the comparator inhibits the oscillator, and the switch remains off (skip-cycle mode). This hysteretic control provides stable regulation without the loop compensation required by PWM controllers. The current-sense resistor between VCC and the switch collector provides peak current limiting; when the voltage across it exceeds approximately 300mV, the switch is forced off for the remainder of the cycle. The Darlington switch configuration provides high current gain but introduces a 1.0V typical saturation voltage, which limits efficiency compared to modern MOSFET-based designs.

Pin Description: MC34063ADR2G Pin Definition and Functions
Pin Name Type Description
1 Switch Collector Power Darlington switch collector (connect to inductor/VCC)
2 Switch Emitter Power Darlington switch emitter (connect to ground for buck)
3 Timing Capacitor Analog Oscillator timing capacitor connection
4 GND Power Ground
5 Comparator Inverting Input Input Feedback voltage input (connect to output divider)
6 VCC Power Supply voltage (3V-40V)
7 Ipeak Sense Input Current sense input (300mV threshold)
8 Driver Collector Power Darlington driver collector (connect via resistor)
Application Scenarios: In which products and applications is MC34063ADR2G used
  • Step-Up Converters: Boost 5V to 12V or 12V to 24V from battery or adapter supplies with minimal external components
  • Step-Down Converters: Buck 12V or 24V to 5V or 3.3V for microcontroller and logic power in automotive systems
  • Voltage Inverters: Generate -5V or -12V from positive supply for op-amp bias and LCD contrast
  • Automotive Power: 3-40V input range handles automotive battery voltage transients without pre-regulation
  • Low-Cost Solutions: Only 5 external components and sub-$1 cost make it ideal for cost-sensitive consumer applications
Alternative Models: What chips are recommended as replacements for MC34063ADR2G
Model Manufacturer Key Difference Package Specs
MC34063ADG onsemi Same in SOIC-8 (tube packaging) – –
MC33063ADR2G onsemi -40°C to +105°C extended temp range – –
NCV3063DR2G onsemi Automotive qualified, higher temp, lower Vsat – –
LM2576-5.0 TI 3A buck regulator, integrated switch, TO-263 – –
LM2596-5.0 TI 3A, 150kHz buck, higher efficiency – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1