Opens in a new tab

Home » Integrated Circuits ICs » MC74HC1G04DTT1G

MC74HC1G04DTT1G

Single inverter, 74HC, 2-6V, 7.5ns@5V, CMOS, push-pull, TSOP-5/SOT-23-5

7000

Effective Inventory

Image for reference only

Manufacturer Part:

MC74HC1G04DTT1G

Package:

TSOP-5 / SOT-23-5 (3.0 x 1.5 x 1.0mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC74HC1G04DTT1G is a single inverter gate from onsemi in the 74HC high-speed CMOS family. Operating from 2.0V to 6.0V with 7.5ns propagation delay at 5V, it provides a simple logic inversion function (Y = Ā) in a tiny TSOP-5 (SOT-23-5) package. The device features balanced propagation delays, input clamping diodes, and is suitable for general-purpose logic inversion in space-constrained designs.

Key Specifications

Logic Function Single Inverter (Y = Ā)
Supply Voltage 2.0V to 6.0V
Propagation Delay 7.5ns typ @ 5V
Output Drive ±5.2mA @ 4.5V
Quiescent Current 1µA max
Input Type Standard CMOS
Output Type Push-Pull CMOS
Package TSOP-5 / SOT-23-5 (3.0 x 1.5mm)
Operating Temperature -55°C to +125°C

Features

  • Single inverter gate in TSOP-5 package
  • 74HC high-speed CMOS technology
  • 2.0V to 6.0V supply range
  • 7.5ns propagation delay at 5V
  • Balanced propagation delays
  • Input clamp diodes
  • Low power consumption
  • Pb-free and RoHS compliant

Applications

  • Signal inversion / complement generation
  • Clock signal inversion
  • Active-low signal generation
  • Single-gate logic glue
  • Logic level conversion (same voltage domain)
Product Introduction: MC74HC1G04DTT1G Product Introduction

The MC74HC1G04DTT1G from onsemi is a single inverter gate in the 74HC (High-Speed CMOS) family, providing the basic logic inversion function Y = Ā in a tiny TSOP-5 (SOT-23-5) package. The 2.0V to 6.0V supply range covers 3.3V and 5V logic systems, and the 7.5ns typical propagation delay at 5V provides fast switching for clock and signal inversion. The balanced propagation delays (similar tPLH and tPHL) ensure symmetric output transitions. The device consumes only 1µA maximum quiescent current, making it suitable for battery-powered and always-on applications. Input clamp diodes protect against electrostatic discharge. The DTT1G suffix specifies TSOP-5 tape-and-reel packaging rated for -55°C to +125°C.

Working Principle: MC74HC1G04DTT1G Working Principle

The MC74HC1G04DTT1G uses a standard CMOS inverter architecture with a PMOS pull-up transistor and an NMOS pull-down transistor. When the input is below the switching threshold (approximately VCC/2), the PMOS is ON and the NMOS is OFF, pulling the output to VCC (logic high). When the input is above the threshold, the NMOS is ON and PMOS is OFF, pulling the output to GND (logic low). The input clamp diodes prevent the input voltage from exceeding VCC + 0.5V or falling below -0.5V, protecting the thin gate oxide from electrostatic discharge. The push-pull output stage provides symmetric source and sink current capability, with rail-to-rail output swing.

Pin Description: MC74HC1G04DTT1G Pin Definition and Functions
Pin Name Description
1 NC No connect
2 A Data input
3 GND Ground
4 Y Inverted output (Y = NOT A)
5 VCC Supply voltage (2.0V to 6.0V)
Application Scenarios: In which products and applications is MC74HC1G04DTT1G used
  • Active-Low Signal Generation: Convert an active-high enable signal to active-low by passing it through the inverter. For example, an MCU outputs a HIGH-to-enable signal that needs to drive an active-low chip select. The MC74HC1G04 inverts the signal with 7.5ns delay, generating the complement without requiring a full hex inverter IC.
  • Clock Inversion: Generate an inverted clock for a complementary clock scheme. Feed the system clock to the inverter input to produce a 180° phase-shifted clock. The balanced propagation delays ensure the inverted clock edges align with the original clock edges.
  • Logic Complement: Generate the Boolean complement of a single signal where adding a 14-pin hex inverter (like 74HC04) would waste five unused gates and board space. The tiny 3.0 x 1.5mm TSOP-5 package is the most compact solution for a single inversion.
Alternative Models: What chips are recommended as replacements for MC74HC1G04DTT1G
Model VCC Speed Key Difference
SN74LVC1G04DCKR 1.65-5.5V 3.5ns TI LVC, lower voltage
NC7SZ04P5X 1.65-5.5V 2.6ns Renesas, faster
74AUP1G04GF 0.8-3.6V 13ns Nexperia, ultra-low power
MC74HC1G04DFT2G 2-6V 7.5ns onsemi, SC-88A package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1