Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » MC74VHC1GT50DTT1G

MC74VHC1GT50DTT1G

Single non-inv buffer, VHC, 1.65-5.5V, TTL inputs, 3.5ns@5V, 7V OVT, Ioff, SOT-23-5

9500

Effective Inventory

Image for reference only

Manufacturer Part:

MC74VHC1GT50DTT1G

Package:

SOT-23-5 / TSOP-5 (3.0 x 1.5 x 1.0mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC74VHC1GT50DTT1G is a single non-inverting buffer from onsemi with 1.65V to 5.5V supply and TTL-compatible input thresholds (T suffix). The VHC (Very High-Speed CMOS) technology provides 3.5ns propagation delay at 5V while maintaining low CMOS power dissipation. The 7V-tolerant inputs enable level translation from 5V to 3V domains, and the Ioff circuitry supports partial power-down and hot insertion in SOT-23-5/TSOP-5 packaging.

Key Specifications

Logic Function Single Non-Inverting Buffer (Y = A)
Supply Voltage 1.65V to 5.5V (T suffix: 2.0V to 5.5V guaranteed)
Input Threshold TTL-compatible (T suffix)
Propagation Delay 3.5ns typ @ 5V; 25.5ns max @ 5V, 50pF
Output Drive ±8mA @ 3V; ±8mA @ 4.5V
Input Voltage Tolerance Up to 7V (regardless of VCC)
Ioff Support Yes (partial power-down protection)
Quiescent Current 1µA max @ 25°C
Output Type Push-Pull CMOS
ESD Protection 2000V HBM, 1000V CDM
Latch-Up >100mA
Package SOT-23-5 / TSOP-5 (3.0 x 1.5mm)
Operating Temperature -55°C to +125°C

Features

  • Single non-inverting buffer in tiny SOT-23-5
  • VHC high-speed CMOS technology
  • TTL-compatible input thresholds (T suffix)
  • 3.5ns propagation delay at 5V
  • 7V-tolerant inputs for level translation
  • Ioff supports partial power-down and hot insertion
  • ±8mA output drive at 3V
  • 1µA max quiescent current
  • Available in SC-88A, SC-74A, SOT-553, SOT-953, UDFN6

Applications

  • Logic level translation (5V to 3V, 3V to 1.8V)
  • Signal buffering and isolation
  • Hot insertion signal conditioning
  • Interface between TTL and CMOS logic
  • Single-gate logic glue
Product Introduction: MC74VHC1GT50DTT1G Product Introduction

The MC74VHC1GT50DTT1G from onsemi is a single non-inverting buffer fabricated with silicon-gate CMOS technology in the VHC (Very High-Speed CMOS) family. The T suffix indicates TTL-compatible input thresholds, enabling the device to accept standard TTL logic levels while producing full CMOS output swings. The 3.5ns typical propagation delay at 5V matches bipolar Schottky TTL speed while consuming CMOS-level power (1µA max ICC). The input protection circuitry tolerates voltages up to 7V regardless of VCC, allowing the device to translate between 5V and 3V logic domains while operating at the higher supply voltage. The Ioff circuitry ensures the output goes high-impedance when VCC is removed, preventing current backflow during hot insertion or partial power-down events. The tiny SOT-23-5 package (3.0 x 1.5mm) occupies minimal board area.

Working Principle: MC74VHC1GT50DTT1G Working Principle

The MC74VHC1GT50DTT1G implements a single non-inverting buffer using a three-stage CMOS architecture: an input stage with TTL-compatible thresholds, an intermediate gain stage, and a buffered push-pull output stage. The T suffix input stage is designed with a reference voltage that sets VIH at approximately 1.4V (at 3V VCC) and VIL at approximately 0.45V, matching standard TTL switching levels. This allows the device to be driven by TTL outputs with 2.4V VOH and 0.4V VOL while producing a full 0-to-VCC CMOS output swing. The 7V-tolerant input structure uses isolation transistors that prevent input voltages above VCC from forward-biasing parasitic diodes, enabling level translation. The Ioff circuit disconnects the output stage from the input when VCC = 0V, placing the output in a high-impedance state that prevents current from flowing from the input back through the device.

Pin Description: MC74VHC1GT50DTT1G Pin Definition and Functions
Pin Name Description
1 NC No connect
2 A Data input (TTL thresholds)
3 GND Ground
4 Y Data output (Y = A)
5 VCC Supply voltage (1.65V to 5.5V)
Application Scenarios: In which products and applications is MC74VHC1GT50DTT1G used
  • 5V TTL to 3.3V CMOS Translation: A 5V TTL device with VOH=2.4V drives the MC74VHC1GT50DTT1G input while the buffer operates at VCC=3.3V. The TTL input threshold accepts the 2.4V signal as a valid high. The output swings 0 to 3.3V with full CMOS levels, cleanly interfacing the 5V TTL device to a 3.3V CMOS system. The 7V-tolerant input allows the 5V signal even though VCC is only 3.3V.
  • Hot-Swap Signal Buffer: Buffer a signal between a backplane and a plug-in card. When the card is inserted, VCC ramps up and the Ioff circuit ensures the output starts high-impedance, preventing bus contention. Once VCC stabilizes, the buffer actively drives the signal. During hot removal, Ioff immediately isolates the output as VCC drops, protecting the backplane.
  • Single-Gate Glue Logic: Use as a simple signal buffer when one more gate is needed and adding a full 14-pin quad gate IC would waste board space. The SOT-23-5 package occupies only 4.5mm², far less than the 51mm² of an SOIC-14 quad gate.
Alternative Models: What chips are recommended as replacements for MC74VHC1GT50DTT1G
Model VCC Input Type Key Difference
MC74VHC1G50DTT1G 1.65-5.5V CMOS CMOS input thresholds (no T)
SN74LVC1G34DCKR 1.65-5.5V CMOS TI LVC, similar buffer
NC7SZ34P5X 1.65-5.5V CMOS Renesas, similar buffer
74AUP1G34GF 0.8-3.6V CMOS Nexperia, ultra-low power

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1