Opens in a new tab

MC9S08LG32CLK

HCS08 MCU, 32KB Flash, 4×40 LCD driver, 12-bit ADC, LQFP-48

3431

Effective Inventory

Image for reference only

Manufacturer Part:

MC9S08LG32CLK

Package:

LQFP-48 (7 x 7 x 1.4 mm, LQ package, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MC9S08LG32CLK from NXP is a 8-bit HCS08 MCU with 32KB Flash, 2KB RAM, LCD segment driver (4×40), 12-bit ADC, and 48-pin LQFP package for LCD-based embedded applications.

Key Specifications

Core HCS08 (8-bit)
Max Bus Frequency 20 MHz
Flash Memory 32 KB
SRAM 2 KB
LCD Controller 4×40 segment driver (160 pixels)
ADC 12-bit, 16 channels
Timers 2x TPM (2+3 channels), RTC, WDG
Communication 2x SCI (UART), SPI, I2C
Supply Voltage 1.8V to 3.6V (LCD and core)
Package LQFP-48 (7x7mm)
Operating Temperature -40 to +85 C

Features

  • Integrated LCD segment driver (4 backplanes x 40 segments)
  • 12-bit ADC with 16 channels
  • Two Timer/PWM modules (TPM)
  • Low-power modes: Stop2, Stop3, Wait
  • Internal 32kHz RC and 31.25kHz IRC oscillators
  • BDM (Background Debug Mode) for development

Applications

  • LCD-based consumer electronics
  • Metering and measurement displays
  • Thermostat and HVAC controllers
  • Appliance LCD user interfaces
Product Introduction: MC9S08LG32CLK Product Introduction

The MC9S08LG32CLK from NXP (formerly Freescale) is a member of the HCS08 family of 8-bit microcontrollers specifically designed for LCD-based embedded applications. The device integrates a 4-backplane x 40-segment LCD controller/driver capable of directly driving up to 160 LCD segments without external driver ICs, making it ideal for consumer appliances, thermostats, meters, and other products with segment-type LCD displays. The HCS08 core achieves up to 20MHz bus frequency with a single-cycle instruction execution architecture for efficient code performance. The 32KB Flash and 2KB SRAM provide sufficient memory for application code, LCD display data, and runtime variables. The 12-bit ADC with 16 channels supports high-resolution analog measurement for sensor interfaces, while two Timer/PWM modules (TPM1 with 2 channels, TPM2 with 3 channels) provide flexible timing and PWM generation for motor control, buzzer driving, and other timing functions. The dual SCI (UART) ports, SPI, and I2C interfaces enable communication with external peripherals, sensors, and host systems. The LCD controller supports multiple backplane configurations (2, 3, or 4 backplanes) and generates the AC waveforms required for LCD driving with configurable frame frequency. The low-power modes (Stop2, Stop3, Wait) combined with the LCD controller’s ability to maintain display content in Stop3 mode allow the display to remain active while the CPU is sleeping, minimizing power consumption in battery-powered applications.

Working Principle: MC9S08LG32CLK Working Principle

The MC9S08LG32CLK operates as an 8-bit HCS08 microcontroller with integrated LCD driver. Key subsystems include: (1) HCS08 Core – an enhanced 6800-based 8-bit CPU with a 3-stage pipeline; most instructions execute in a single bus cycle; the CPU supports 16-bit indexed addressing and stack pointer relative addressing; the background debug mode (BDM) provides single-wire in-circuit debugging without using CPU resources; (2) LCD Controller – generates the multiplexed AC waveforms for driving segment-type LCD displays; the controller supports 2, 3, or 4 backplane (common) configurations; the 40 segment outputs are directly driven by internal charge pumps; LCD data is stored in a dedicated RAM buffer; the frame frequency is programmable (typically 30-100Hz); in Stop3 mode, the LCD controller can continue to operate from the internal oscillator while the CPU is halted; (3) Clock System – an internal 31.25kHz RC oscillator provides the default clock source; an internal 32kHz oscillator provides the RTC clock; an external oscillator (32kHz to 20MHz crystal) can be used for higher accuracy; the ICS (Internal Clock Source) module can multiply the internal clock to higher frequencies using an FLL; (4) 12-bit ADC – a successive-approximation ADC with 16 external channels; the ADC can operate in 8-bit or 12-bit mode; automatic compare function can generate interrupts when conversion results exceed a threshold; (5) TPM Modules – two Timer/PWM modules with edge-aligned or center-aligned PWM, input capture, and output compare capabilities.

Pin Description: MC9S08LG32CLK Pin Definition and Functions
Pin Group Count Function
VDD/VSS 2 pairs Power and ground
VDDLCD 1 LCD supply voltage
RESET 1 System reset (active low)
BKGD 1 Background debug mode
IRQ 1 External interrupt request
ADC (AD0-AD15) 16 Analog inputs (shared with GPIO)
LCD (FP0-FP39) 40 LCD segment driver outputs (shared with GPIO)
BP0-BP3 4 LCD backplane (common) outputs
GPIO/AF varies General-purpose I/O with alternate functions
Application Scenarios: In which products and applications is MC9S08LG32CLK used
  • Thermostat: LCD displays temperature setpoint and current reading, 12-bit ADC reads NTC thermistor, TPM drives relay
  • Metering: 4×40 LCD shows multi-tariff energy readings, 12-bit ADC reads current/voltage sensors, SCI for data download
  • Appliance display: 160-segment LCD for microwave/oven control panel, capacitive buttons via ADC, dual SCI for communication
  • Portable instrument: battery-powered LCD meter with Stop3 mode maintaining display, 2KB RAM for measurement buffer
Alternative Models: What chips are recommended as replacements for MC9S08LG32CLK
Manufacturer Part Number Package Notes
NXP MC9S08LL16CLK LQFP-48 16KB Flash, lower cost
NXP MC9S08LL64CLK LQFP-64 64KB Flash, more I/O
TI MSP430F437IPN LQFP-80 16-bit, LCD driver, 32KB Flash
Renesas R8C/L35C-MFB LQFP-52 16-bit, LCD driver, 64KB Flash

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1