Opens in a new tab

MCP1702T-3302E/MB

LDO Regulator, 3.3V, 250mA, 2uA Iq, SOT-89

12345

Effective Inventory

Image for reference only

Manufacturer Part:

MCP1702T-3302E/MB

Package:

SOT-89 (4.5 x 2.5 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP1702T-3302E/MB from Microchip Technology is a 250mA low-dropout (LDO) linear regulator with 3.3V fixed output, 2.0V dropout at 250mA, and SOT-89 package.

Key Specifications

Type 250mA Low-Dropout Linear Regulator
Output Voltage 3.3V (fixed)
Output Current 250 mA (max)
Dropout Voltage 725 mV (typ) @ 250mA; 2.0V (max) @ 250mA
Input Voltage Range 2.7V to 13.2V (6.0V max for 3.3V output)
Quiescent Current 2.0 uA (typical)
Line Regulation 0.4% / V (typical)
Load Regulation 0.2% / mA (typical)
Package SOT-89 (MB suffix)
Operating Temperature -40C to +125C (E suffix)

Features

  • 3.3V fixed output at 250mA
  • Ultra-low 2.0uA quiescent current
  • 725mV typical dropout at 250mA
  • Input voltage up to 13.2V (6.0V max for 3.3V output)
  • Short-circuit current limit protection
  • Over-temperature protection
  • No external capacitors required for stability

Applications

  • Battery-powered devices
  • Microcontroller power supply
  • Portable electronics
  • Sensor power regulation
Product Introduction: MCP1702T-3302E/MB Product Introduction

The MCP1702T-3302E/MB from Microchip Technology is a 250mA low-dropout positive voltage regulator with a fixed 3.3V output in a SOT-89 package. The 3302 in the part number indicates 3.3V output voltage. The device features an ultra-low quiescent current of only 2.0uA typical, making it ideal for battery-powered applications where standby current must be minimized. The 725mV typical dropout voltage at full 250mA load allows operation from a single Li-Ion cell or 3.6V battery. The input voltage range extends to 13.2V (maximum), though the maximum input for the 3.3V version is limited to 6.0V by the power dissipation constraints. The device includes short-circuit current limiting and over-temperature shutdown protection. No external capacitors are required for stability, though a 1uF output capacitor improves transient response. The SOT-89 package provides better thermal performance than SOT-23 for applications approaching the 250mA current limit.

Working Principle: MCP1702T-3302E/MB Working Principle

The MCP1702T-3302E/MB is a PNP pass transistor based LDO regulator. The input voltage feeds the emitter of the PNP pass transistor, whose collector provides the regulated output. An error amplifier compares a fraction of the output voltage (via an internal resistor divider for the fixed 3.3V version) with an internal 1.2V bandgap reference. The error amplifier drives the base of the PNP pass transistor to maintain the output at 3.3V. The PNP topology allows the dropout voltage to be only VCE(sat) of the pass transistor, typically 725mV at 250mA. The 2.0uA quiescent current is achieved by biasing the error amplifier and reference at very low currents. The short-circuit protection monitors the output current by sensing the voltage across an internal sense resistor in the pass transistor emitter. When the current exceeds approximately 350mA, the base drive is reduced to limit the output current. The over-temperature protection senses the die temperature and shuts down the pass transistor when it exceeds approximately 150C.

Pin Description: MCP1702T-3302E/MB Pin Definition and Functions
Pin Name Type Function
1 GND Power Ground
2 VIN Power Input voltage (2.7V-6.0V for 3.3V output)
3 VOUT Output Regulated 3.3V output
Tab GND Power Thermal pad / ground (SOT-89)
Application Scenarios: In which products and applications is MCP1702T-3302E/MB used
  • 3.3V MCU power from single Li-Ion cell (3.0-4.2V) with 2uA standby current for months of battery life
  • Portable sensor node with 3.3V regulation from 4.5V battery and 725mV dropout for maximum usable capacity
  • Bluetooth module 3.3V supply with 250mA peak current and over-temperature protection
Alternative Models: What chips are recommended as replacements for MCP1702T-3302E/MB
Manufacturer Part Number Package Notes
Microchip MCP1702T-5002E/MB SOT-89 5.0V output version
TI TLV70033DDCR SOT-23-5 3.3V, 300mA, lower noise
onsemi NCP511SN33T1G SOT-23-5 3.3V, 150mA, similar class
Richtek RT9013-33GB SOT-23-5 3.3V, 300mA, lower dropout
Microchip MCP1703AT-3302E/MB SOT-89 3.3V, 250mA, 16V input

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1