Opens in a new tab

MCP2551T-I/SN

ISO 11898-2 CAN transceiver, 1Mbps, 4.5-5.5V, >4kV ESD, short-circuit protected, SOIC-8

10914

Effective Inventory

Image for reference only

Manufacturer Part:

MCP2551T-I/SN

Package:

SOIC-8 (4.90 x 3.90 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP2551T-I/SN from Microchip Technology is a high-speed CAN transceiver compliant with the ISO 11898-2 standard in an SOIC-8 package. It provides data rates up to 1Mbps, supports bus voltages from -12V to +12V, and includes ESD protection greater than 4kV, making it a widely-used interface between CAN controllers and the physical bus.

Key Specifications

CAN Standard ISO 11898-2
Data Rate Up to 1Mbps
Supply Voltage 4.5V ~ 5.5V
Bus Common-Mode Range -12V ~ +12V
ESD Protection >4kV (HBM)
Short-Circuit Protection Yes (to battery and ground)
Standby Mode Yes (low power)
Package SOIC-8 (4.90 x 3.90mm)
Operating Temperature -40°C ~ +85°C (I Grade)

Features

  • Fully compliant with ISO 11898-2 (CAN high-speed)
  • Supports up to 1Mbps data rate for all CAN baud rates
  • ESD protection greater than 4kV on bus pins
  • Short-circuit protection to battery and ground on CANH/CANL
  • Low-power standby mode for battery-powered applications
  • Slope control for reduced EMI in lower speed applications
  • Unpowered node does not disturb the bus

Applications

  • Automotive CAN bus networks
  • Industrial automation CAN systems
  • Medical equipment interconnect
  • Building automation CAN buses
  • Marine and aviation CAN networks
Product Introduction: MCP2551T-I/SN Product Introduction

The MCP2551T-I/SN from Microchip Technology is an industry-standard high-speed CAN transceiver that provides the physical layer interface between a CAN protocol controller and the physical CAN bus. Fully compliant with the ISO 11898-2 standard, it supports data rates up to 1Mbps for high-speed CAN applications. The device features robust bus protection including ESD protection greater than 4kV, short-circuit protection to battery and ground, and common-mode voltage range of -12V to +12V. A low-power standby mode reduces supply current for battery-powered applications. The slope control feature allows reduction of the CAN bus signal slew rate to minimize EMI in lower-speed applications. The device operates from a single 5V supply and is available in a standard SOIC-8 package.

Working Principle: MCP2551T-I/SN Working Principle

The MCP2551 translates the TTL-level CAN controller signals (TXD and RXD) to the differential CAN bus signals (CANH and CANL). When TXD is driven low (dominant), the internal driver circuit drives CANH high (approximately 3.5V) and CANL low (approximately 1.5V), creating a differential voltage of about 2V on the bus. When TXD is high (recessive), both CANH and CANL are biased to approximately 2.5V through internal bias networks, resulting in zero differential voltage. The receiver continuously monitors the CANH-CANL differential voltage and drives RXD low when the differential exceeds the receiver threshold (approximately 0.9V), and high when below. The slope control circuit limits the rise and fall times of the driver output at lower data rates to reduce EMI. In standby mode, the driver is disabled while the receiver remains active for wake-up detection.

Pin Description: MCP2551T-I/SN Pin Definition and Functions
Pin Name Function
1 TXD Transmit data input from CAN controller
2 VSS Ground
3 VDD Supply voltage (4.5V-5.5V)
4 RXD Receive data output to CAN controller
5 VREF Reference voltage output (VDD/2)
6 CANL CAN bus low-side line
7 CANH CAN bus high-side line
8 RS Slope control / standby mode input
Application Scenarios: In which products and applications is MCP2551T-I/SN used
  • Automotive OBD-II Interface: Provides robust CAN bus physical layer for vehicle diagnostic tools with >4kV ESD and short-circuit protection
  • Industrial CANopen Network: 1Mbps data rate supports CANopen communication between PLCs, I/O modules, and drives
  • Medical Equipment Interconnect: Differential signaling provides noise immunity in hospital environments; standby mode reduces power in battery-backed systems
  • Building Automation CAN Bus: Slope control reduces EMI in long cable runs between HVAC controllers and sensors
Alternative Models: What chips are recommended as replacements for MCP2551T-I/SN
Model Manufacturer Key Difference
MCP2551T-I/SN Microchip This part (industry standard)
SN65HVD230DR TI 3.3V CAN transceiver, 1Mbps, SOIC-8
TJA1050T NXP 5V CAN, 1Mbps, high-speed, SOIC-8
TJA1042T NXP 5V CAN, 5Mbps, standby, SOIC-8
SN65HVD1050DR TI 5V CAN, 1Mbps, enhanced ESD, SOIC-8

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1