Opens in a new tab

MCP3421A0T-E/CH

18-Bit Delta-Sigma ADC, I2C, PGA 1-8x, 2.048V Ref, SOT-23-6

16299

Effective Inventory

Image for reference only

Manufacturer Part:

MCP3421A0T-E/CH

Package:

SOT-23-6 (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP3421A0T-E/CH from Microchip Technology is an 18-bit delta-sigma ADC with I2C interface, onboard 2.048V reference, and programmable gain amplifier (PGA) in a tiny SOT-23-6 package.

Key Specifications

Type 18-Bit Delta-Sigma ADC with I2C Interface
Resolution 18 / 16 / 14 / 12 bits (selectable)
Sample Rate 3.75 / 15 / 60 / 240 SPS
Input Type 1 differential
Reference Voltage 2.048V internal (+/-0.05%, 5 ppm/C)
PGA Gain 1x, 2x, 4x, 8x
INL 10 ppm of FSR (max)
Interface I2C (Standard/Fast/High-Speed)
Supply Voltage 2.7 V to 5.5 V
Supply Current 145 uA (continuous), 39 uA (1 SPS one-shot)
Package SOT-23-6
Operating Temperature -40C to +125C

Features

  • 18-bit resolution in tiny SOT-23-6 package
  • Onboard 2.048V reference with 5 ppm/C drift
  • Programmable gain amplifier (1x to 8x)
  • Self-calibration of offset and gain per conversion
  • One-shot and continuous conversion modes
  • I2C interface with standard/fast/high-speed modes
  • Ultra-low 39 uA in one-shot mode at 1 SPS

Applications

  • Precision weigh scales and strain gauges
  • Temperature sensing with RTD/thermocouple
  • Battery fuel gauging
  • Portable instrumentation
Product Introduction: MCP3421A0T-E/CH Product Introduction

The MCP3421A0T-E/CH from Microchip Technology is a single-channel 18-bit delta-sigma ADC in a tiny SOT-23-6 package. The device integrates a precision 2.048V reference (+/-0.05%, 5 ppm/C drift), programmable gain amplifier (1x/2x/4x/8x), and an internal oscillator. Resolution and sample rate are programmable: 18-bit at 3.75 SPS, 16-bit at 15 SPS, 14-bit at 60 SPS, or 12-bit at 240 SPS. The onboard PGA allows direct measurement of small signals like thermocouple outputs and strain gauge bridges without external amplification. Self-calibration of offset and gain is performed automatically on each conversion. The one-shot mode reduces supply current to just 39 uA for battery-powered applications.

Working Principle: MCP3421A0T-E/CH Working Principle

The MCP3421A0T-E/CH uses a third-order delta-sigma modulator followed by a digital decimation filter. The modulator oversamples the input at a high frequency (approximately 3.072 MHz internal clock) and converts the analog signal into a 1-bit data stream. The decimation filter reduces the data rate to the selected output rate (3.75 to 240 SPS) while increasing effective resolution. Higher oversampling ratios (lower output rates) provide more resolution: 18 bits at 3.75 SPS requires 2^17 = 131072 oversampling ratio. The PGA before the modulator amplifies small input signals up to 8x, improving the signal-to-noise ratio for low-level inputs. The onboard 2.048V reference sets the full-scale range at +/-2.048V / PGA. Each conversion includes automatic offset and gain calibration, where the modulator measures internal zero and full-scale references and applies digital correction to the output code. The I2C interface provides read access to conversion results and write access to configuration bits (PGA gain, sample rate, conversion mode).

Pin Description: MCP3421A0T-E/CH Pin Definition and Functions
Pin Name Type Function
1 SCL Input I2C clock
2 SDA I/O I2C data
3 VSS Ground Ground
4 VIN+ Input Differential non-inverting input
5 VIN- Input Differential inverting input
6 VDD Power Supply voltage (2.7-5.5V)
Application Scenarios: In which products and applications is MCP3421A0T-E/CH used
  • 24-bit effective weigh scale using 18-bit ADC with PGA x8 for load cell
  • K-type thermocouple temperature measurement with cold junction compensation
  • 4-20mA current loop receiver with 250 Ohm shunt and 18-bit ADC
  • Portable battery fuel gauge with one-shot mode for power saving
Alternative Models: What chips are recommended as replacements for MCP3421A0T-E/CH
Manufacturer Part Number Package Notes
Microchip MCP3422A0-E/SN SOIC-8 2-channel version
Microchip MCP3424SL SOIC-14 4-channel version
TI ADS1115IDGSR VSSOP-10 16-bit, 4-ch, similar class
ADI AD7124-4BCPZ LFCSP-24 24-bit, 4-ch, higher performance
Microchip MCP3561R TSSOP-20 24-bit, SPI, upgrade path

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1