Opens in a new tab

MCP3911A0-E/SS

Dual-ch 24-bit energy metering AFE, 125kSPS, PGA 1-32x, 94.5dB SINAD, 1.2V ref, SSOP-20

2920

Effective Inventory

Image for reference only

Manufacturer Part:

MCP3911A0-E/SS

Package:

SSOP-20 (208mil body, 7.2 x 5.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP3911A0-E/SS is a 3.3V dual-channel energy metering analog front end (AFE) from Microchip, featuring two simultaneous-sampling 24-bit delta-sigma ADCs with programmable gain amplifiers (PGA). With 94.5dB SINAD and -106.5dBc THD, it meets IEC 62053-22 Class 0.1S metering standards. The device includes a low-drift 1.2V internal reference, phase delay compensation, and a 20MHz SPI interface in a 20-lead SSOP package.

Key Specifications

ADC Resolution 16/24-bit (configurable)
Channels 2 (simultaneous sampling)
Sample Rate Up to 125 kSPS per channel
PGA Gain 1x to 32x (per channel)
SINAD 94.5 dB (typical)
THD -106.5 dBc (up to 35th harmonic)
SFDR 111 dB (typical)
SNR 95 dB (typical)
Internal Reference 1.2V, 7 ppm/°C drift
Supply Voltage 2.7V to 3.6V
Power 8.9 mW typical @ 3.3V
Interface SPI, up to 20MHz
Package SSOP-20 (208mil)
Operating Temperature -40°C to +125°C
Qualification AEC-Q100 Grade 1

Features

  • Two simultaneous-sampling 24-bit delta-sigma ADCs
  • Independent PGAs with gains from 1x to 32x per channel
  • 94.5dB SINAD and 111dB SFDR for high-accuracy metering
  • Low-drift internal 1.2V reference (7 ppm/°C)
  • Phase delay compensation with 1µs resolution
  • Per-channel 24-bit digital offset and gain calibration
  • Separate modulator output pins for each channel
  • Independent data ready pin for synchronization
  • Continuous read/write modes for efficient SPI communication
  • Ultra-low power shutdown mode (<2µA)

Applications

  • Single-phase and poly-phase energy meters (IEC/ANSI compliant)
  • Power monitoring and measurement systems
  • Industrial power quality analyzers
  • Electric vehicle charging stations
  • Smart grid and demand response systems
  • Server and data center power monitoring
Product Introduction: MCP3911A0-E/SS Product Introduction

The MCP3911A0-E/SS is a 3.3V dual-channel analog front end (AFE) from Microchip Technology, designed for high-precision energy metering and power monitoring applications. It contains two simultaneous-sampling 24-bit delta-sigma ADCs with independent programmable gain amplifiers (PGA, 1x to 32x) on each channel. With 94.5dB SINAD, -106.5dBc THD, and 111dB SFDR, it meets the accuracy requirements of IEC 62053-22 Class 0.1S and ANSI C12.20 standards. The device integrates a low-drift 1.2V internal voltage reference (7 ppm/°C), phase delay compensation with 1µs resolution, per-channel offset and gain calibration registers, and a high-speed 20MHz SPI interface. The AEC-Q100 Grade 1 qualification enables automotive power monitoring applications.

Working Principle: MCP3911A0-E/SS Working Principle

The MCP3911 contains two independent delta-sigma ADC channels, each with a PGA front-end, third-order modulator, and decimation filter. The PGA amplifies small shunt voltage signals before the modulator, with gains programmable from 1x to 32x. Each modulator oversamples the input at rates up to 4MHz, producing a high-speed bit stream that the digital decimation filter converts to 24-bit output data. The OSR (oversampling ratio) is programmable from 32 to 4096, trading resolution for data rate. Phase delay compensation aligns the voltage and current channel data with 1µs resolution, critical for accurate power measurement with reactive loads. Per-channel calibration registers correct for system-level offset and gain errors. The SPI interface supports continuous read mode, allowing the host MCU to read both channels’ data in a single DMA transfer.

Pin Description: MCP3911A0-E/SS Pin Definition and Functions
Pin Name Description
1 VSS Ground
2 CH0+ Channel 0 positive input (current)
3 CH0- Channel 0 negative input (current)
4 AVDD Analog supply (2.7-3.6V)
5 CH1+ Channel 1 positive input (voltage)
6 CH1- Channel 1 negative input (voltage)
7 VREF+ Positive reference input (or internal ref out)
8 VREF- Negative reference input
9 CLKIN Clock input / crystal connection
10 CLKOUT Clock output / crystal connection
11 OSCH Oscillator high-speed mode select
12 DVDD Digital supply (2.7-3.6V)
13-16 MCLK,MDAT0,MDAT1,DR Modulator outputs and data ready
17 CS SPI chip select
18 SCK SPI clock
19 SDI SPI data input
20 SDO SPI data output
Application Scenarios: In which products and applications is MCP3911A0-E/SS used
  • Single-Phase Energy Meter: Connect a current shunt to CH0 (with PGA gain of 32x for mV-level signals) and a voltage divider to CH1 (gain 1x). The 94.5dB SINAD provides 0.1% accuracy across a 1000:1 dynamic range, meeting IEC 62053-22 Class 0.1S. Phase delay compensation aligns the channels for accurate real and reactive power measurement.
  • EV Charging Station: Monitor charging current and voltage simultaneously. The simultaneous sampling ensures that current and voltage measurements are time-aligned for accurate power calculation. Use the AEC-Q100 qualified version for automotive-grade reliability. The 125kSPS data rate captures fast transients during connection and disconnection events.
  • Server Power Monitoring: Measure server rack power consumption in real-time. Connect current transformers to CH0 and line voltage dividers to CH1. The per-channel calibration registers compensate for sensor offset and gain errors. Continuous SPI read mode streams power data to the BMC via DMA with minimal CPU overhead.
Alternative Models: What chips are recommended as replacements for MCP3911A0-E/SS
Model Channels Resolution SINAD Key Difference
MCP3912 3 24-bit 93.5dB Three channels, for 3-phase
MCP3901 2 24-bit 88dB Predecessor, lower performance
AFE5404 4 24-bit 86dB TI, 4-channel for 3-phase+neutral
RN8209C 2 24-bit 90dB Renergy, single-phase metering
ADE7953 2 24-bit 80dB ADI, integrated metrology engine

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1