Product Overview
The MCP6004T-I/ST from Microchip Technology is a quad general-purpose CMOS operational amplifier with 1MHz gain bandwidth and rail-to-rail input/output in a TSSOP-14 package. Operating from 1.8V to 6V with only 100uA per channel quiescent current, it is designed for low-power, single-supply applications.
Key Specifications
| Number of Channels | 4 |
| Gain Bandwidth Product | 1 MHz |
| Slew Rate | 0.6 V/us |
| Supply Voltage Range | 1.8V to 6V |
| Quiescent Current per Channel | 100 uA typical |
| Input Offset Voltage | 4.5 mV max |
| Input Bias Current | 1 pA typical |
| CMRR | 76 dB typical |
| PSRR | 86 dB |
| Input Voltage Noise | 28 nV/sqrtHz @ 1kHz |
| Output Current | 23 mA typical |
| Operating Temperature | -40 to 125 C (I suffix) |
| Package | TSSOP-14 (ST) |
Features
- Quad rail-to-rail input/output op amp
- 1MHz gain bandwidth product
- 1.8V to 6V single-supply operation
- 100uA per channel quiescent current
- 28nV/sqrtHz input noise
- Unity gain stable
- AEC-Q100 qualified (automotive versions available)
- Extended temperature: -40 to 125C
- Battery-powered signal conditioning
- Portable instrumentation
- Sensor interface amplifiers
- Active filters
- Analog front-end for data acquisition
- 4-channel sensor amplifier for data acquisition system
- Multi-channel active filter bank for audio processing
- Battery-powered 3.3V instrumentation quad amplifier
- Photodiode array amplifier with 1pA bias current
- Portable medical device signal conditioning
Applications
Product Introduction: MCP6004T-I/ST Product Introduction
The MCP6004T-I/ST from Microchip is a quad 1MHz rail-to-rail CMOS op amp in TSSOP-14. Operates from 1.8-6V with 100uA per channel and 1pA input bias current. Features 4.5mV max offset, 76dB CMRR, and 28nV/sqrtHz noise. The I suffix denotes -40 to 125C industrial temperature range, T denotes tape-and-reel, ST denotes TSSOP-14. Ideal for low-power multi-channel signal conditioning in portable and battery-powered applications.
Working Principle: MCP6004T-I/ST Working Principle
Uses a CMOS input stage with complementary P-channel and N-channel differential pairs for rail-to-rail input common-mode range. The 1pA input bias current is achieved by the insulated MOS gate input. The output stage uses a common-source CMOS configuration for rail-to-rail output swing. Internal frequency compensation provides unity-gain stability with any capacitive load. The 1MHz GBW and 0.6V/us slew rate are optimized for low-power operation at 100uA per channel.
Pin Description: MCP6004T-I/ST Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT A | Output | Amplifier A output |
| 2 | IN- A | Input | Amplifier A inverting input |
| 3 | IN+ A | Input | Amplifier A non-inverting input |
| 4 | VIN+ B | Input | Amplifier B non-inverting input |
| 5 | IN- B | Input | Amplifier B inverting input |
| 6 | VOUT B | Output | Amplifier B output |
| 7 | VSS | Power | Negative supply / ground |
| 8 | VOUT C | Output | Amplifier C output |
| 9 | IN- C | Input | Amplifier C inverting input |
| 10 | IN+ C | Input | Amplifier C non-inverting input |
| 11 | IN+ D | Input | Amplifier D non-inverting input |
| 12 | IN- D | Input | Amplifier D inverting input |
| 13 | VOUT D | Output | Amplifier D output |
| 14 | VDD | Power | Positive supply (1.8-6V) |
Application Scenarios: In which products and applications is MCP6004T-I/ST used
Alternative Models: What chips are recommended as replacements for MCP6004T-I/ST
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| Microchip | MCP6004-I/P | PDIP-14 | Through-hole version |
| TI | LM324DR | SOIC-14 | Industry standard quad, not RRIO |
| Microchip | MCP6004T-E/ST | TSSOP-14 | Commercial temp (0-85C) version |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






