Opens in a new tab

MCP6541T-I/OT

Single Comparator, 600nA Iq, Push-Pull RRIO, SOT-23-5, AEC-Q100

8765

Effective Inventory

Image for reference only

Manufacturer Part:

MCP6541T-I/OT

Package:

SOT-23-5 (2.9 x 1.6 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP6541T-I/OT from Microchip Technology is a single-channel push-pull output sub-microamp comparator with 600 nA quiescent current, rail-to-rail input, and 4 us propagation delay in a SOT-23-5 package.

Key Specifications

Type Single Push-Pull Output Sub-Microamp Comparator
Channels 1
Supply Voltage 1.6 V to 5.5 V
Quiescent Current 600 nA (typical)
Propagation Delay 4 us (typical @ 100mV overdrive)
Input Offset Voltage +/-1.5 mV (typical), +/-7 mV (max)
Input Bias Current 1 pA (typical)
Input Hysteresis 3.3 mV (typical)
CMRR 70 dB (typical)
Output Push-Pull (CMOS/TTL compatible)
Package SOT-23-5
Operating Temperature -40C to +85C (I grade)

Features

  • Ultra-low 600 nA quiescent current
  • Rail-to-rail input range (VSS-0.3V to VDD+0.3V)
  • Push-pull CMOS/TTL output
  • 4 us propagation delay
  • 3.3 mV internal hysteresis for noise immunity
  • 1 pA input bias current (CMOS input)
  • AEC-Q100 Grade 1 qualified

Applications

  • Battery-powered voltage monitoring
  • Window comparator circuits
  • RC oscillator and timer
  • Alarm and monitoring systems
Product Introduction: MCP6541T-I/OT Product Introduction

The MCP6541T-I/OT from Microchip Technology is a single-channel push-pull output comparator optimized for ultra-low-power applications. The 600 nA typical quiescent current enables years of battery operation in always-on monitoring circuits. The rail-to-rail input range extends 300 mV beyond both supply rails, accommodating the full input common-mode range without phase reversal. The push-pull output stage swings rail-to-rail, directly driving CMOS and TTL logic inputs without pull-up resistors. The 3.3 mV internal hysteresis prevents output oscillation due to input noise, which is critical for slowly-varying signals. The 1 pA input bias current preserves high-impedance source accuracy. The 4 us propagation delay supports moderate-speed applications. The AEC-Q100 Grade 1 qualification enables automotive use. The SOT-23-5 package provides a minimal footprint.

Working Principle: MCP6541T-I/OT Working Principle

The MCP6541T-I/OT uses a CMOS input stage that provides the 1 pA input bias current and rail-to-rail common-mode range. The input stage is followed by a high-gain differential amplifier that compares the IN+ and IN- voltages. When IN+ exceeds IN- by more than the offset voltage plus hysteresis, the output drives to VDD (logic HIGH). When IN- exceeds IN+ by the same threshold, the output drives to VSS (logic LOW). The 3.3 mV internal hysteresis creates two distinct switching thresholds: a higher threshold for positive-going inputs and a lower threshold for negative-going inputs. This hysteresis window prevents the output from chattering when the input signal slowly crosses the threshold or has noise superimposed. The push-pull CMOS output stage uses complementary P-channel and N-channel transistors to actively drive the output to both VDD and VSS, unlike open-drain comparators that require an external pull-up resistor. The 600 nA quiescent current is achieved by operating the internal amplifier at very low bias currents, which limits the bandwidth and results in the 4 us propagation delay.

Pin Description: MCP6541T-I/OT Pin Definition and Functions
Pin Name Type Function
1 VDD Power Positive supply (1.6-5.5V)
2 IN- Input Inverting input
3 IN+ Input Non-inverting input
4 VSS Power Ground / negative supply
5 OUT Output Push-pull output
Application Scenarios: In which products and applications is MCP6541T-I/OT used
  • Battery voltage monitor with 600nA always-on current and push-pull output to MCU GPIO
  • Window comparator using 2x MCP6541 for over/undervoltage alarm
  • RC relaxation oscillator at 1kHz for system tick with 600nA average current
  • Capacitive touch sensor threshold detector with 1pA input bias current
Alternative Models: What chips are recommended as replacements for MCP6541T-I/OT
Manufacturer Part Number Package Notes
Microchip MCP6541T-E/OT SOT-23-5 Extended temp -40~125C version
TI TLV3491AIDBVR SOT-23-5 Push-pull, 1.8uA, similar class
Microchip MCP6541RT-I/OT SOT-23-5 Automotive grade version
Microchip MCP6541T-I/SN SOIC-8 Same function, SOIC-8 package
Maxim MAX9031AKA+T SOT-23-5 Push-pull, 0.5uA, alternative

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1