Opens in a new tab

MCP79400-I/SN

I2C RTCC with 64B SRAM, 64-bit unique ID, VBAT backup, 1ppm trim, SOIC-8

6350

Effective Inventory

Image for reference only

Manufacturer Part:

MCP79400-I/SN

Package:

SOIC-8 (4.9 × 3.9 × 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP79400-I/SN from Microchip Technology is a battery-backed I2C real-time clock/calendar (RTCC) with 64 bytes of user SRAM and a 64-bit protected EEPROM unique ID in an 8-pin SOIC package. It features automatic VCC-to-VBAT switchover, power-fail timestamp, dual alarms, programmable clock output, and digital trimming with 1 ppm resolution for precision timekeeping.

Key Specifications

Interface I2C (up to 400 kHz)
Supply Voltage (VCC) 1.8 V to 5.5 V
Battery Voltage (VBAT) 1.3 V min
Timekeeping Current (VBAT) <700 nA typ
Dynamic Current (VCC) <5 µA typ
User SRAM 64 bytes (battery-backed)
Unique ID 64-bit (EEPROM, user/factory programmable)
Trimming Resolution 1 ppm
Operating Temperature -40°C to +85°C
Package SOIC-8 (4.9 × 3.9 × 1.5 mm)

Features

  • Automatic VCC to VBAT switchover for seamless backup
  • Power-fail timestamp logs power interruptions
  • Dual alarms with single interrupt output
  • Programmable open-drain output (CLKOUT: 32.768/8.192/4.096 kHz, 1 Hz)
  • On-chip digital trimming with 1 ppm resolution
  • 64-bit protected EEPROM for unique ID or MAC address

Applications

  • Embedded system timekeeping
  • IoT device power management
  • Data logging with timestamps
  • Industrial control systems
  • Automotive event recording
Product Introduction: MCP79400-I/SN Product Introduction

The Microchip MCP79400-I/SN is a highly integrated I2C real-time clock/calendar that combines precision timekeeping with memory and advanced features typically found in higher-priced devices. It operates from 1.8 V to 5.5 V on VCC and as low as 1.3 V on VBAT, with automatic switchover ensuring uninterrupted timekeeping during power failures. The on-chip digital trimming circuit provides 1 ppm resolution for crystal accuracy compensation. A 64-bit protected EEPROM space stores a unique ID or MAC address programmable at the factory or by the end user. Dual alarms with a single interrupt output support wake-up and timing functions, while the programmable clock output offers four selectable frequencies.

Working Principle: MCP79400-I/SN Working Principle

The MCP79400 uses a 32.768 kHz crystal oscillator as its time base, with time tracked in seconds, minutes, hours, days, day-of-week, months, and years including leap year correction to 2399. Communication occurs via the I2C bus at up to 400 kHz. The power management circuit continuously monitors VCC and automatically switches to VBAT when VCC drops below threshold, logging the power-fail event with a timestamp. The digital trimming circuit adjusts the oscillator frequency in 1 ppm steps by adding or omitting clock cycles, compensating for crystal tolerance and temperature drift. The 64-byte SRAM retains data under battery backup, while the 64-bit EEPROM unique ID is one-time programmable with 1 million erase/write cycles endurance.

Pin Description: MCP79400-I/SN Pin Definition and Functions
Pin Name Description
1 X1 Crystal Oscillator Input (32.768 kHz)
2 X2 Crystal Oscillator Output
3 VBAT Battery Backup Supply Input
4 VSS Ground
5 SDA I2C Serial Data (Open-Drain)
6 SCL I2C Serial Clock Input
7 MFP Multi-Function Output (Alarm/CLKOUT, Open-Drain)
8 VCC Primary Supply Voltage (1.8-5.5 V)
Application Scenarios: In which products and applications is MCP79400-I/SN used
  • Embedded Timekeeping: Precision RTC for microcontroller-based systems with 1 ppm trimming ensuring less than 86 ms/day drift
  • IoT Power Management: Low-power timekeeping with <700 nA battery current enabling years of operation on coin cell
  • Data Logging: Power-fail timestamp and battery-backed SRAM preserve critical data during unexpected outages
  • Industrial Control: Scheduled maintenance alerts via dual alarm interrupt in PLC and SCADA systems
  • Automotive Event Recording: Unique 64-bit ID for device authentication in fleet management and telematics
Alternative Models: What chips are recommended as replacements for MCP79400-I/SN
Model Brand SRAM Unique ID VBAT (nA)
MCP79401-I/SN Microchip 64B 128-bit 700
MCP79402-I/SN Microchip 64B 128-bit 700
DS3231SN Maxim None No 880
PCF8563BS NXP None No 250
RV-3028-C7 Micro Crystal None No 40

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1