Opens in a new tab

Home » Integrated Circuits ICs, Sensors » MCP9700A-E/TO

MCP9700A-E/TO

Analog temp sensor, +/-0.5C, 10mV/C, TO-92

8934

Effective Inventory

Image for reference only

Manufacturer Part:

MCP9700A-E/TO

Package:

TO-92-3 (4.2 x 3.6 x 4.9 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP9700A-E/TO from Microchip Technology is a low-power linear active thermistor analog temperature sensor with +/-0.5C accuracy in a TO-92-3 through-hole package. Output voltage is directly proportional to temperature with 10mV/C slope.

Key Specifications

Accuracy +/-0.5 C (0 to +70C)
Output Slope 10 mV/C
Output at 0C 500 mV
Supply Voltage 2.3V to 5.5V
Supply Current 6 uA typical
Temperature Range -40 to +125 C (E suffix)
Package TO-92-3
Output Impedance 800 ohm
Start-Up Time 800 us max

Features

  • +/-0.5C accuracy over 0 to +70C range
  • Linear 10mV/C analog output simplifies ADC conversion
  • 6uA ultra-low supply current for battery operation
  • No external components required – direct VDD and GND connection
  • TO-92 through-hole package for easy prototyping

Applications

  • Battery temperature monitoring
  • Environmental temperature sensing
  • Hard drive and PC board temperature monitoring
  • Industrial control temperature compensation
  • Consumer appliance temperature measurement
Product Introduction: MCP9700A-E/TO Product Introduction

The MCP9700A-E/TO from Microchip Technology is a low-power linear active thermistor integrated circuit that provides an analog output voltage directly proportional to temperature. The device features +/-0.5C accuracy over the 0 to +70C range with a linear 10mV/C output slope and 500mV output at 0C, simplifying ADC-based temperature measurement. The 6uA supply current enables battery-powered applications, and no external components are required. The E suffix denotes extended temperature range (-40 to +125C), and TO denotes TO-92 through-hole package. The A variant offers improved accuracy compared to the non-A MCP9700.

Working Principle: MCP9700A-E/TO Working Principle

The MCP9700A-E/TO operates as a linear analog temperature sensor. (1) The internal bandgap voltage reference and proportional-to-absolute-temperature (PTAT) circuit generate a voltage that is linearly proportional to temperature. The output voltage follows Vout = 500mV + 10mV x T, where T is temperature in Celsius. This linear relationship eliminates the need for lookup tables or complex calibration required by thermistors. (2) The 10mV/C output slope is designed to match the resolution of common ADCs: at 5V supply with a 10-bit ADC, each LSB represents approximately 0.5C (5V/1024 = 4.88mV per LSB). Oversampling or using a higher-resolution ADC improves measurement resolution. (3) The 6uA supply current is achieved through a CMOS design that biases the bandgap and PTAT circuits at minimal current. The 800us start-up time ensures the output is valid within one ADC conversion cycle after power-up.

Pin Description: MCP9700A-E/TO Pin Definition and Functions
Pin Name Function
1 VOUT Analog voltage output (10mV/C)
2 GND Ground
3 VDD Power supply (2.3-5.5V)
Application Scenarios: In which products and applications is MCP9700A-E/TO used
  • Battery temperature monitoring with direct ADC connection and 6uA current
  • Environmental temperature sensing in HVAC systems
  • Hard drive and PC board temperature monitoring with simple analog interface
  • Industrial control temperature compensation for precision circuits
  • Consumer appliance temperature measurement with TO-92 easy mounting
Alternative Models: What chips are recommended as replacements for MCP9700A-E/TO
Model Manufacturer Key Difference
MCP9700AT-E/TT Microchip SOT-23-3, same function, smaller
MCP9701-E/TO Microchip 19.5mV/C slope, wider output range
LM35DZ TI 10mV/C, 0.5C accuracy, TO-92
TMP36GT9 ADI 10mV/C, 750mV at 25C, TO-92
LMT86DCKT TI SC-70, 10.9mV/C, lower current

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1