Product Overview
The MCP9701AT-E/TT from Microchip Technology is a low-power analog CMOS temperature sensor in SOT-23-3 package, providing a linear output voltage proportional to temperature with 400mV offset for negative temperature reading.
Key Specifications
| Output Type | Analog voltage |
| Temperature Range | -40 to +125 C (operating), -40 to +150 C (extended) |
| Accuracy | +-2 C (0-70C), +-4 C (full range) |
| Sensitivity | 19.53 mV/C |
| Output Offset | 400 mV at 0C |
| Supply Voltage | 2.4 to 5.5V |
| Supply Current | 6 uA typical |
| Package | SOT-23-3 |
Features
- Low power consumption: 6uA typical
- Wide operating voltage: 2.4V to 5.5V
- Linear analog output: 19.53mV/C
- No external components required
- Small SOT-23-3 footprint
- Battery-powered temperature monitoring
- Industrial temperature sensing
- Hard disk drive and PC thermal management
- Environmental monitoring systems
- Battery-powered temperature monitoring in IoT devices using 6uA supply current for minimal power drain
- Industrial temperature sensing with +-2C accuracy and direct ADC interface requiring no external components
- Hard disk drive and PC thermal management with linear 19.53mV/C output
- Environmental monitoring systems leveraging the 400mV offset for negative temperature readings
Applications
Product Introduction: MCP9701AT-E/TT Product Introduction
The MCP9701AT-E/TT from Microchip Technology is a low-cost, low-power analog CMOS temperature sensor that provides a linear voltage output proportional to the measured temperature. The device features a 400mV DC offset at 0C, which allows reading negative temperatures without a negative supply. The output coefficient is 19.53mV/C, and the sensor provides an accuracy of +-2C over the 0C to +70C range. Operating from a single 2.4V to 5.5V supply, the MCP9701A consumes only 6uA typical, making it ideal for battery-powered applications. The sensor requires no external components and provides a direct analog interface to an ADC. The SOT-23-3 package minimizes board space, and the device is specified over the full -40C to +125C operating range with extended operation to +150C.
Working Principle: MCP9701AT-E/TT Working Principle
The MCP9701AT-E/TT operates through two main subsystems: (1) Temperature sensing element – A dedicated thermal sensing circuit using bipolar transistors generates a proportional-to-absolute-temperature (PTAT) voltage. The PTAT voltage increases linearly with temperature at a rate of approximately 19.53mV per degree Celsius. (2) Output conditioning – The raw PTAT voltage is amplified and combined with a 400mV DC offset to produce the final output voltage: VOUT = 400mV + (19.53mV/C x T). At 0C, the output is 400mV; at +25C, it is approximately 888mV; at +125C, it is approximately 2841mV. The 400mV offset allows reading negative temperatures on a single-supply ADC (at -40C, output = 400 + 19.53*(-40) = -181mV from 0C reference, but the 400mV offset keeps the output positive at 219mV). The entire circuit is implemented in CMOS, resulting in the ultra-low 6uA supply current.
Pin Description: MCP9701AT-E/TT Pin Definition and Functions
| Pin | Name | Function |
|---|---|---|
| 1 | VOUT | Analog voltage output |
| 2 | GND | Ground |
| 3 | VDD | Power supply (2.4-5.5V) |
Application Scenarios: In which products and applications is MCP9701AT-E/TT used
Alternative Models: What chips are recommended as replacements for MCP9701AT-E/TT
| Model | Manufacturer | Key Difference |
|---|---|---|
| MCP9700AT-E/TT | Microchip | 10mV/C output, 500mV offset |
| LM35DT | TI | 10mV/C, TO-92, no offset |
| LMT86DCKT | TI | SC-70, 1770-23mV/C |
| TC1047AVNBTR | Microchip | 10mV/C, SOT-23B |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






