Opens in a new tab

ME6211A33PG-N

LDO regulator, 3.3V/300mA, 1.5uA Iq, 200mV dropout, SOT-89-3, current limit, thermal shutdown

1444

Effective Inventory

Image for reference only

Manufacturer Part:

ME6211A33PG-N

Package:

SOT-89-3 (4.5 x 2.5 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ME6211A33PG-N is a low-dropout (LDO) linear voltage regulator from Microne (Mikron), providing a fixed 3.3V output at up to 300mA. It features a low quiescent current of 1.5uA (typical), ultra-low dropout voltage of 200mV at 150mA, and high output accuracy of +/-1%. The SOT-89-3 package provides a compact footprint with good thermal dissipation for portable and battery-powered applications.

Key Specifications

Output Voltage 3.3V (fixed)
Max Output Current 300 mA
Dropout Voltage 200 mV at 150 mA (typ)
Input Voltage Range 3.5V to 6.0V
Quiescent Current 1.5 uA (typ), 3.0 uA (max)
Output Accuracy +/-1%
PSRR 65 dB at 1 kHz
Output Noise 30 uVrms (10 Hz to 100 kHz)
Protection Current limit, thermal shutdown, short circuit
Package SOT-89-3
Operating Temperature -40C to +85C

Features

  • Ultra-low quiescent current of 1.5uA for battery-powered applications
  • Low dropout voltage of 200mV at 150mA
  • High output voltage accuracy of +/-1%
  • Excellent PSRR of 65dB at 1kHz for noise-sensitive loads
  • Built-in current limiting, thermal shutdown, and short-circuit protection
  • Compact SOT-89-3 package with good thermal performance

Applications

  • Battery-powered IoT and wearable devices
  • MCU and sensor power supply regulation
  • RF module power supply (WiFi, Bluetooth, Sub-GHz)
  • Portable medical equipment
  • USB-powered peripheral devices
Product Introduction: ME6211A33PG-N Product Introduction

The ME6211A33PG-N is a low-dropout linear regulator from Microne, providing a fixed 3.3V output at up to 300mA. With an ultra-low quiescent current of just 1.5uA and a dropout voltage of 200mV at 150mA, it is optimized for battery-powered applications where power efficiency and long operating life are critical. The +/-1% output accuracy, 65dB PSRR, and 30uVrms output noise make it suitable for noise-sensitive loads including RF modules and precision ADCs. The SOT-89-3 package provides compact size with adequate thermal dissipation.

Working Principle: ME6211A33PG-N Working Principle

The ME6211A33PG-N operates as a series-pass linear regulator using a P-channel MOSFET as the pass element. The error amplifier compares a fraction of the output voltage (via an internal resistor divider) with an internal bandgap reference voltage. The amplifier output drives the PMOS gate to regulate the output voltage. The low 1.5uA quiescent current is achieved by biasing the error amplifier and bandgap reference at minimal current levels while maintaining regulation stability. The P-channel MOSFET allows the dropout voltage to be very low (200mV at 150mA) since the gate can be driven below the source. PSRR of 65dB at 1kHz is achieved by the high open-loop gain of the error amplifier rejecting input supply variations. The current limit circuit senses the pass transistor current and reduces the gate drive when the limit is exceeded. Thermal shutdown activates at approximately 150C junction temperature, turning off the pass transistor until the junction cools below the hysteresis threshold.

Pin Description: ME6211A33PG-N Pin Definition and Functions
Pin Name Type Function
1 GND Ground Ground reference
2 VIN Power Input Input voltage (3.5V to 6.0V)
3 VOUT Power Output Regulated 3.3V output
Application Scenarios: In which products and applications is ME6211A33PG-N used
Application Circuit Role Key Requirement
IoT Sensor Node MCU/sensor power rail 1.5uA Iq, 3.3V, 300mA, battery life
RF Module Supply WiFi/BT transceiver VCC 65dB PSRR, 30uVrms noise, 3.3V
Wearable Device Main 3.3V regulator 1.5uA Iq, SOT-89, low dropout
USB Peripheral 5V to 3.3V regulation 6V max input, 300mA, thermal shutdown
Medical Portable Precision sensor supply +/-1% accuracy, low noise, 65dB PSRR
Alternative Models: What chips are recommended as replacements for ME6211A33PG-N
Model Manufacturer Key Difference
ME6211A33M3G-N Microne Same device, SOT-23-3 package (smaller)
HT7133-3 Holtek 3.3V LDO, SOT-89, 250mA, 5uA Iq
XC6206P332MR Torex 3.3V LDO, SOT-23, 200mA, 1uA Iq
AMS1117-3.3 Advanced Monolithic Systems 3.3V LDO, SOT-223, 800mA, higher Iq
TLV70033DDCR TI 3.3V LDO, SOT-23-5, 300mA, 5uA Iq

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1