Opens in a new tab

MIC2025-1YM TR

Single Hi-Side USB Power Switch, 500mA limit, 90mOhm, 8-SOIC, -40~85°C

7500

Effective Inventory

Image for reference only

Manufacturer Part:

MIC2025-1YM TR

Package:

8-SOIC (0.154″, 3.90mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MIC2025-1YM TR is a single-channel high-side N-channel MOSFET power distribution switch from Microchip, optimized for USB power distribution. It features 500mA current limiting, thermal shutdown, undervoltage lockout, and reverse current blocking in an 8-pin SOIC package with active-high enable.

Key Specifications

Switch Type Single-channel High-Side N-FET
Number of Outputs 1
RDS(ON) 90mOhm typical @ 5V
Current Limit 500mA minimum (fixed)
Input Voltage 2.7V to 5.5V
Enable Logic Active High
Fault Flag Yes (3ms transient filter)
UVLO Yes
Thermal Shutdown Yes
Reverse Blocking Yes (no body diode)
Soft Start Yes
Package 8-SOIC (3.9mm wide)
Operating Temperature -40°C to +85°C

Features

  • Single-channel USB power distribution switch
  • 500mA minimum current limit
  • 140mOhm max on-resistance
  • Fault flag with 3ms filter eliminates false assertions
  • Reverse current blocking (no body diode)
  • Soft-start minimizes inrush current
  • UL recognized and EN/IEC 60950-1 certified

Applications

  • USB port power distribution
  • PC and notebook peripheral power
  • Hot-plug power supply switching
  • General-purpose high-side power switching
  • Self-powered and bus-powered USB hubs
Product Introduction: MIC2025-1YM TR Product Introduction

The MIC2025-1YM TR is a single-channel high-side N-channel MOSFET power distribution switch from Microchip, optimized for USB power distribution applications. It provides 500mA minimum current limiting with thermal shutdown and undervoltage lockout to protect the device and load. Reverse current blocking eliminates the body diode conduction path found in typical P-channel switches. The active-high enable and fault flag with 3ms transient filter simplify system design. Soft-start circuitry minimizes inrush current with highly capacitive loads. The 8-pin SOIC package is pin-compatible with MIC2525.

Working Principle: MIC2025-1YM TR Working Principle

The MIC2025 uses an internal N-channel MOSFET as the pass element, driven by an internal charge pump to achieve high-side switching with an on-resistance of 90mOhm. When the EN pin is driven high, the charge pump activates and the MOSFET turns on. Current limiting is implemented with a sense resistor and comparator; if output current exceeds the limit, the MOSFET is throttled. Thermal shutdown disables the switch if junction temperature exceeds the threshold. The FLG output is an open-drain flag that asserts low during overcurrent or thermal fault conditions, with an internal 3ms filter to ignore transient spikes. Soft-start ramps the gate voltage gradually to limit inrush current.

Pin Description: MIC2025-1YM TR Pin Definition and Functions
Pin Name Function
1 EN Enable Input (Active High)
2 FLG Fault Status Output (Open-Drain)
3 GND Ground
4 NC No Connect
5 NC No Connect
6 OUT Switch Output to Load
7 IN Power Input (2.7-5.5V)
8 OUT Switch Output to Load
Application Scenarios: In which products and applications is MIC2025-1YM TR used
  • USB downstream port power switching and protection
  • PC peripheral hot-plug power control
  • Self-powered and bus-powered USB hub port power
  • General-purpose high-side load switching
  • Battery-powered system load isolation
Alternative Models: What chips are recommended as replacements for MIC2025-1YM TR
Manufacturer Part Number Outputs Notes
Microchip MIC2075-1YM TR 1 Circuit breaker mode version
Microchip MIC2525-1YM TR 1 Pin-compatible, adjustable current limit
TI TPS2051 1 USB power switch equivalent

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1