Opens in a new tab

MIC69502WR

5A adj LDO, 250mV dropout, 0.5V-5.5V out, S-PAK-7

1008

Effective Inventory

Image for reference only

Manufacturer Part:

MIC69502WR

Package:

S-PAK-7 (6.5 x 8.9 x 2.3 mm, 7 leads + tab)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MIC69502WR from Microchip Technology (formerly Micrel) is a 5A ultra-low-dropout adjustable LDO regulator with 250mV typical dropout, 0.5V minimum output, and enable in 7-pin S-PAK package.

Key Specifications

Output Current 5 A
Output Voltage 0.5V to 5.5V (adjustable)
Dropout Voltage 250 mV typical @ 5A
Maximum Dropout 500 mV @ 5A over temperature
Input Voltage 1.65V to 5.5V
Initial Accuracy +/-1.0%
Quiescent Current 5 mA typical
Stable With 10uF ceramic output capacitor @ 5A
Enable Yes (logic-level shutdown)
Protection Thermal shutdown, current limit
Package S-PAK-7 (WR suffix)
Operating Temperature -40 to +125 C (TJ)

Features

  • 5A high output current for ASIC/FPGA core supply
  • 250mV ultra-low dropout at full 5A load
  • 0.5V minimum adjustable output for sub-1V cores
  • +/-1% initial output voltage tolerance
  • Stable with 10uF ceramic capacitor at 5A

Applications

  • ASIC core voltage regulator
  • PLD/FPGA core power supply
  • Linear point-of-load conversion
  • High-speed post-regulator
  • Low-voltage high-current supply
Product Introduction: MIC69502WR Product Introduction

The MIC69502WR from Microchip Technology (formerly Micrel) is a 5A ultra-low-dropout adjustable linear regulator in S-PAK-7 package. The device features 250mV typical dropout voltage at full 5A load, adjustable output from 0.5V to 5.5V, and +/-1% initial output voltage accuracy. The 1.65V to 5.5V input range and 0.5V minimum output make it ideal for low-voltage high-current applications such as ASIC, PLD, and FPGA core power supply. The regulator is stable with a 10uF ceramic output capacitor even at full 5A load, and features logic-level enable shutdown, thermal shutdown, and current limit protection. The WR suffix denotes S-PAK-7 package with tube packaging.

Working Principle: MIC69502WR Working Principle

The MIC69502WR operates as a high-current ultra-low-dropout linear regulator. (1) The PNP pass transistor provides low dropout voltage (250mV typical at 5A) by operating with minimal collector-emitter voltage. The output voltage is set by an external resistor divider from the output to the ADJ pin, which is compared with a 0.5V internal reference. The low 0.5V reference enables output voltages as low as 0.5V, critical for sub-1V ASIC and FPGA core supply. (2) The +/-1% initial accuracy is achieved through laser-trimmed internal references and precision resistors in the error amplifier feedback network. The excellent line regulation (0.5%) and load regulation (0.2%) maintain output voltage stability over input and load variations. (3) The S-PAK-7 package with exposed tab provides low thermal resistance for high-power dissipation. At 5A load with 1V dropout, the device dissipates 5W, requiring adequate PCB copper area for thermal management. The thermal shutdown protects the device when junction temperature exceeds the safe limit. The current limit restricts output current during fault conditions.

Pin Description: MIC69502WR Pin Definition and Functions
Pin Name Function
1 EN Enable input (active high)
2 IN Input supply (1.65-5.5V)
3 ADJ Adjustment feedback (0.5V ref)
4 GND Ground
5 OUT Regulated output
6 OUT Regulated output
7 ERR Error flag output (open drain)
Tab GND Thermal tab (connect to GND)
Application Scenarios: In which products and applications is MIC69502WR used
  • ASIC core voltage regulator with 0.5V minimum output and 5A capability
  • PLD/FPGA core power supply with 250mV dropout and +/-1% accuracy
  • Linear point-of-load conversion from 3.3V or 5V to low-voltage core
  • High-speed post-regulator for switcher output cleanup
  • Low-voltage high-current supply with enable and error flag
Alternative Models: What chips are recommended as replacements for MIC69502WR
Model Manufacturer Key Difference
MIC69302WR Microchip 3A version, same family
MIC69303WR Microchip 3A, flag output, same pkg
LT3021EDH#PBF ADI 500mA, 0.2V dropout, adjustable
TPS74401RGWR TI 3A, adjustable, very low dropout
NCP59702MNTXG onsemi 2A, low dropout, DFN

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1