Opens in a new tab

MIC94094YC6

1.2A high-side load switch, 130mOhm, soft-start, SC-70-6

8600

Effective Inventory

Image for reference only

Manufacturer Part:

MIC94094YC6

Package:

SC-70-6 (2.25 x 1.35 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MIC94094YC6 from Microchip Technology (formerly Micrel) is a 1.2A high-side load switch with 130mOhm RDS(ON) P-channel MOSFET, soft-start (120us), and 1.7V-5.5V input range in SC-70-6 package.

Key Specifications

Input Voltage 1.7V to 5.5V
Output Current 1.2 A continuous
RDS(ON) 130 mOhm typical
Switch Type High-side P-channel MOSFET
Turn-On Soft-start (120 us slew rate controlled)
Logic Control 1.5V logic level compatible
Quiescent Current Ultra low
Shutdown Current Micro-power
Package SC-70-6 (YC6 suffix)
Operating Temperature -40 to +125 C (TJ)

Features

  • 1.2A continuous current with 130mOhm RDS(ON)
  • 120us soft-start turn-on for inrush current control
  • 1.5V logic level control compatible
  • 1.7V to 5.5V wide input voltage range
  • Ultra-low quiescent and shutdown current

Applications

  • Cellular phone power distribution
  • Portable GPS and navigation devices
  • Personal media players power switching
  • Ultra-mobile PC load switching
  • Portable instrumentation power control
Product Introduction: MIC94094YC6 Product Introduction

The MIC94094YC6 from Microchip Technology (formerly Micrel) is a high-side load switch designed for 1.7V to 5.5V operation, featuring an internal 130mOhm RDS(ON) P-channel MOSFET that supports up to 1.2A continuous current. The MIC94094 variant provides 120us soft-start turn-on to control inrush current, preventing supply voltage dips during power rail switching. The device supports 1.5V logic level control for direct interface with low-voltage GPIO. The ultra-low quiescent current and micro-power shutdown current make it ideal for battery-powered portable devices. The YC6 suffix denotes SC-70-6 package.

Working Principle: MIC94094YC6 Working Principle

The MIC94094YC6 operates as a high-side P-channel MOSFET load switch. (1) The internal P-channel MOSFET connects the input voltage (VIN) to the output (VOUT) when enabled. The 130mOhm RDS(ON) minimizes voltage drop and power dissipation at 1.2A load. The P-channel architecture eliminates the need for a boost converter or charge pump, simplifying the design. (2) The 120us soft-start feature controls the slew rate of the output voltage during turn-on. This limits inrush current into capacitive loads, preventing supply voltage droops that could affect other circuits. The soft-start time is internally set at 120us for the MIC94094 variant. (3) The enable input is compatible with 1.5V logic levels, allowing direct control from low-voltage MCU GPIO. An internal level shift circuit translates the low-voltage control signal to the gate drive voltage required for the P-channel MOSFET. In shutdown mode, the MOSFET is off and quiescent current drops to micro-power levels.

Pin Description: MIC94094YC6 Pin Definition and Functions
Pin Name Function
1 VIN Input supply (1.7-5.5V)
2 GND Ground
3 EN Enable input (active high, 1.5V logic)
4 VOUT Switched output to load
5 VIN Input supply (1.7-5.5V)
6 NC No connect
Application Scenarios: In which products and applications is MIC94094YC6 used
  • Cellular phone power distribution with inrush current control
  • Portable GPS and navigation devices with 1.7V minimum input
  • Personal media players power switching with soft-start
  • Ultra-mobile PC load switching with 1.5V logic control
  • Portable instrumentation power control with micro-power shutdown
Alternative Models: What chips are recommended as replacements for MIC94094YC6
Model Manufacturer Key Difference
MIC94090YC6 Microchip Rapid turn-on, no soft-start
MIC94092YC6 Microchip 790us soft-start, same family
MIC94095YMT-TR Microchip 120us soft-start, load discharge, MLF
TPS22918DBVR TI 2A, 80mOhm, SOT-23-5
NCP45560IMNTWG-H onsemi 4A, 30mOhm, DFN

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1