Opens in a new tab

MMBT2222LT1G

NPN general-purpose transistor, 30V VCEO, 600mA IC, 250MHz fT, SOT-23 package

4879

Effective Inventory

Image for reference only

Manufacturer Part:

MMBT2222LT1G

Package:

SOT-23 (TO-236), 2.9 x 1.3 x 1.0mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MMBT2222LT1G is a general-purpose NPN bipolar junction transistor from onsemi in the SOT-23 (TO-236) surface-mount package. It is the SMD equivalent of the industry-standard 2N2222A through-hole transistor, offering 30V VCEO, 600mA continuous collector current, and 250MHz transition frequency. The -G suffix denotes the lead-free (Pb-Free) version shipped in tape-and-reel packaging of 3000 units.

Key Specifications

Transistor Type NPN
VCEO (Collector-Emitter Voltage) 30V
VCBO (Collector-Base Voltage) 60V
IC (Collector Current) 600mA continuous, 1100mA peak
hFE (DC Current Gain) 100 @ 150mA, 10V
VCE(sat) 0.4V @ 15mA/150mA; 1.6V @ 50mA/500mA
fT (Transition Frequency) 250MHz
Power Dissipation 225mW (FR-4 board)
Package SOT-23 (TO-236), 2.9 x 1.3mm
Operating Temperature -55°C to +150°C

Features

  • Industry-standard 2N2222A in SMD form factor
  • High current gain (hFE up to 300)
  • 250MHz transition frequency for RF switching applications
  • Pb-Free package compliant with RoHS
  • Low saturation voltage (0.4V typical at 150mA)
  • Marking code: M1B

Applications

  • General-purpose low-power switching
  • Signal amplification in audio and RF stages
  • LED driver and relay driver circuits
  • Logic-level interfacing and level shifting
  • Temperature-compensated bias networks
Product Introduction: MMBT2222LT1G Product Introduction

The MMBT2222LT1G is a general-purpose NPN silicon transistor from onsemi housed in the compact SOT-23 surface-mount package. As the direct SMD equivalent of the legendary 2N2222A, it offers identical electrical characteristics in a package footprint 90% smaller than TO-92. The device features 30V collector-emitter voltage rating, 600mA continuous collector current, and a transition frequency of 250MHz, making it suitable for both switching and amplification. The hFE ranges from 35 to 300 depending on collector current, with a typical gain of 100 at 150mA. The low VCE(sat) of 0.4V at 150mA minimizes power loss in saturated switching applications. The Pb-free SOT-23 package is rated for 225mW dissipation on FR-4 PCB and operates from -55°C to +150°C. Marking code M1B identifies this device on the production line.

Working Principle: MMBT2222LT1G Working Principle

The MMBT2222LT1G operates as a current-controlled bipolar junction transistor. In the active region, a small base current (IB) controls a larger collector current (IC) through the current gain hFE (typically 100). For switching applications, the transistor is driven into saturation by ensuring IB > IC/hFE, at which point VCE drops to VCE(sat) (0.4V typical). The NPN structure consists of a thin P-type base sandwiched between N-type emitter and collector regions. Forward-biasing the base-emitter junction (VBE ≈ 0.7V) injects electrons from the emitter into the base, where most are swept across the reverse-biased collector-base junction to form the collector current. The 250MHz transition frequency (fT) is the frequency at which hFE drops to unity, determined by the base transit time and junction capacitances. In cutoff (VBE < 0.5V), both junctions are reverse-biased and only leakage current (ICBO = 10nA max) flows. The 600mA rating is limited by the bonding wire and package thermal characteristics, with a peak rating of 1100mA for short pulses.

Pin Description: MMBT2222LT1G Pin Definition and Functions
Pin Name Type Function
1 Base Input Base terminal (controls collector current, VBE ≈ 0.7V when forward-biased)
2 Emitter Power Emitter terminal (connects to ground or emitter resistor)
3 Collector Power Collector terminal (connects to load or VCC through load resistor)
Application Scenarios: In which products and applications is MMBT2222LT1G used
  • Low-power switching: Drives LEDs, relays, and small motors with microcontroller GPIO; base resistor calculated as RB = (VGPIO – 0.7V) / (IC / hFE)
  • Signal amplification: Common-emitter amplifier for audio and RF signals up to 100MHz; hFE of 100 provides 40dB voltage gain
  • Logic level shifting: Converts 3.3V logic to 5V logic or drives 12V loads from 5V control; open-collector configuration with pull-up resistor
  • Darlington pair: Two MMBT2222LT1G devices cascaded for ultra-high gain (hFE > 10,000) in ultra-sensitive detector circuits
Alternative Models: What chips are recommended as replacements for MMBT2222LT1G
Manufacturer Part Number Package Notes
onsemi MMBT2222ALT1G SOT-23 40V VCEO version, higher voltage rating
Diodes Inc MMBT2222A-7-F SOT-23 Pin-compatible, Diodes Inc brand
Nexperia BC847C,215 SOT-23 45V NPN, higher hFE (420-800), Nexperia
Infineon BC847BWE6433 SOT-323 Smaller footprint, Infineon brand
onsemi MMBT3904LT1G SOT-23 40V 200mA general-purpose NPN, alternative choice

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1