Opens in a new tab

MMSZ5228B-7-F

3.3V Zener diode, 5%, 500mW, SOD-123, voltage regulation/reference

11785

Effective Inventory

Image for reference only

Manufacturer Part:

MMSZ5228B-7-F

Package:

SOD-123 (2.65 x 1.60 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MMSZ5228B-7-F from Diodes Incorporated is a 3.3 V Zener diode in a SOD-123 package. Part of the MMSZ52xxB series, it provides 3.3 V nominal regulation with 5% tolerance and 500 mW power dissipation, suitable for voltage regulation and reference applications in space-constrained circuits.

Key Specifications

Zener Voltage (VZ) 3.3 V (nominal), 3.14-3.47 V (range)
Tolerance 5% (B suffix)
Power Dissipation 500 mW
ZZT (impedance) 28 Ω @ IZT = 20 mA
Leakage Current 5 µA @ VR = 1 V
Package SOD-123

Features

  • 3.3 V nominal Zener voltage with 5% tolerance
  • 500 mW power dissipation in compact SOD-123
  • Low Zener impedance of 28 Ω at 20 mA
  • Pb-Free and RoHS compliant
  • Wide operating temperature range

Applications

  • Voltage regulation and clamping
  • Voltage reference for comparators
  • ESD protection for 3.3 V logic
  • Overvoltage protection
  • Signal level shifting and clamping
Product Introduction: MMSZ5228B-7-F Product Introduction

The MMSZ5228B-7-F from Diodes Incorporated is a 3.3 V nominal Zener diode in a compact SOD-123 surface-mount package. The B suffix indicates 5% voltage tolerance with a Zener voltage range of 3.14 V to 3.47 V at IZT = 20 mA. The device provides 500 mW maximum power dissipation with a low dynamic impedance of 28 Ω at the test current, making it suitable for basic voltage regulation and reference applications in 3.3 V logic systems. The SOD-123 package offers a smaller footprint than the traditional SOD-80/MiniMELF while maintaining adequate thermal performance for the 500 mW rating. Pb-Free and RoHS compliant. The -7-F suffix indicates 7-inch tape and reel packaging for automated assembly.

Working Principle: MMSZ5228B-7-F Working Principle

The MMSZ5228B operates in the reverse breakdown region where the Zener diode maintains a relatively constant voltage across its terminals despite variations in current. When reverse-biased above the Zener voltage (3.3 V nominal), the diode enters avalanche breakdown, conducting current in the reverse direction while maintaining the Zener voltage at its terminals. The dynamic impedance (ZZT = 28 Ω) represents the small-signal slope of the V-I characteristic at the test current (20 mA), determining how much the Zener voltage changes with load current variations. In a typical shunt regulator application, a series resistor limits the total current, and the Zener diode shunts excess current to maintain the output voltage at approximately 3.3 V.

Pin Description: MMSZ5228B-7-F Pin Definition and Functions
Pin Name Function
1 Cathode Positive terminal during Zener operation; marked with band
2 Anode Negative terminal during Zener operation; connects to ground
Application Scenarios: In which products and applications is MMSZ5228B-7-F used
  • 3.3 V Rail Clamping: Shunt regulation and overvoltage clamping for 3.3 V logic power rails
  • Voltage Reference: Low-precision voltage reference for comparator and op-amp bias circuits
  • ESD Protection: Input protection for 3.3 V MCU and FPGA I/O pins against transient overvoltage
  • Signal Clamping: Limiting signal voltage swings to the 3.3 V domain in mixed-voltage systems
  • Power Supply Sequencing: Voltage threshold detection using the Zener as a reference with a transistor amplifier
Alternative Models: What chips are recommended as replacements for MMSZ5228B-7-F
Model Manufacturer VZ Tol Pd Package Notes
MMSZ5228BT1G onsemi 3.3 V 5% 500 mW SOD-123 Direct equivalent
BZX55C3V3 Nexperia 3.3 V 5% 500 mW DO-35 Through-hole equivalent
MM3Z3V3ST1G onsemi 3.3 V 5% 200 mW SOD-523 Smaller package, lower Pd
BZT52C3V3-7-F Diodes Inc 3.3 V 5% 500 mW SOD-123 Same manufacturer, different series
1N5228B-TR Microsemi 3.3 V 5% 500 mW DO-35 Through-hole, military grade

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1