Opens in a new tab

MMSZ5263BT1G

56V 500mW Zener diode, ±5%, 150Ω Zzt, 100nA leakage, SOD-123

15800

Effective Inventory

Image for reference only

Manufacturer Part:

MMSZ5263BT1G

Package:

SOD-123 (2.69 x 1.60mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MMSZ5263BT1G from ON Semiconductor is a 500mW Zener voltage regulator diode with a nominal Zener voltage of 56V (±5% tolerance), 150Ω maximum Zener impedance, and 100nA reverse leakage at 43V. Housed in a compact SOD-123 surface-mount package, it provides general-purpose voltage regulation and reference for medium-current applications.

Key Specifications

  • Zener Voltage (VZ): 56V nominal (53.2V~58.8V @ IZT=2mA)
  • Tolerance: ±5%
  • Power Dissipation: 500mW on FR-4 board @ TL=75°C
  • Zener Impedance (ZZT): 150Ω max @ IZT=2mA
  • Zener Impedance (ZZK): 1500Ω @ IZK=0.25mA
  • Reverse Leakage (IR): 100nA max @ VR=43V
  • Forward Voltage (VF): 0.9V max @ IF=10mA
  • Temperature Coefficient: ~+55mV/°C typical (above 47V)
  • Thermal Resistance: 340°C/W (junction-to-ambient)
  • Operating Temperature: -55°C ~ +150°C
  • ESD Rating: Class 3 (>16kV HBM)
  • Package: SOD-123 (2.69 x 1.60mm)
  • Compliance: RoHS, Pb-free, AEC-Q101 (SZ prefix)

Features

  • Compact SOD-123 package for high-density PCBs
  • 500mW power rating on standard FR-4 board
  • Wide Zener voltage range in MMSZ52xxx series (2.4V~110V)
  • Pb-free construction
  • ESD Class 3 rating (>16kV HBM)
  • AEC-Q101 qualified (SZMMSZ prefix)

Applications

  • Voltage regulation and reference
  • Overvoltage protection
  • Level shifting and clamping
  • Switching power supply auxiliary bias
  • Consumer electronics power management
Product Introduction: MMSZ5263BT1G Product Introduction

The MMSZ5263BT1G from ON Semiconductor is a 56V Zener voltage regulator diode in a compact SOD-123 surface-mount package. The 500mW power rating is adequate for low-power bias and reference applications. The 56V Zener voltage with ±5% tolerance is commonly used in auxiliary bias circuits for switching power supplies, where it provides a stable reference voltage derived from the high-voltage DC bus through a series resistor. The SOD-123 package is significantly smaller than the traditional DO-41/DO-35 through-hole alternatives, enabling higher component density on modern PCBs. The BT1G suffix indicates ±5% tolerance and tape-and-reel packaging. The broader MMSZ52xxxT1G series covers Zener voltages from 2.4V to 110V in the same package footprint.

Working Principle: MMSZ5263BT1G Working Principle

The MMSZ5263BT1G operates in the reverse breakdown (Zener/avalanche) region. When reverse-biased above the Zener voltage (56V nominal), the device conducts current while maintaining a relatively constant voltage across its terminals. At 56V, the primary breakdown mechanism is avalanche multiplication rather than the Zener tunneling effect (which dominates below approximately 5V). The avalanche breakdown occurs when the electric field in the depletion region accelerates carriers to sufficient energy to create electron-hole pairs through impact ionization, creating a self-sustaining multiplication chain. The relatively high 150Ω Zener impedance at 56V reflects the soft knee characteristic of high-voltage Zener diodes, meaning the terminal voltage varies with current more than low-voltage Zeners. A series current-limiting resistor is always required to prevent excessive power dissipation.

Pin Description: MMSZ5263BT1G Pin Definition and Functions
Pin Name Function
1 Cathode Marked with polarity band; connect to positive for reverse bias
2 Anode Connect to negative for reverse bias operation
Application Scenarios: In which products and applications is MMSZ5263BT1G used

The MMSZ5263BT1G is commonly used in the bias circuit of off-line switching power supplies, where the 56V Zener provides a stable reference for the VCC supply of PWM controllers. When connected across the VCC rail through a current-limiting resistor, it clamps the VCC to approximately 56V, preventing overvoltage damage to the controller. For overvoltage protection circuits, the 56V threshold detects when the output voltage exceeds safe limits. In level shifting applications, it converts a high-voltage signal to a regulated lower voltage for ADC input protection. The high ESD rating (>16kV HBM) provides additional ruggedness during assembly and operation.

Alternative Models: What chips are recommended as replacements for MMSZ5263BT1G
Model Manufacturer Key Difference
1N5263BTR ON Semiconductor 56V 500mW, DO-41 through-hole
BZX84C56LT1G ON Semiconductor 56V 250mW, SOT-23 package
MMSZ5263BT1G Diodes Inc Same spec, different manufacturer

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1