Opens in a new tab

MMZ1608S121ATA00

120R @ 100MHz EMI suppression filter, 0603, 2.5A

7906

Effective Inventory

Image for reference only

Manufacturer Part:

MMZ1608S121ATA00

Package:

0603 (1608 Metric)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MMZ1608S121ATA00 from TDK is a 120 Ohm @ 100MHz SMD ferrite bead in a 0603 (1608 Metric) package. EMI suppression ferrite bead filter.

Key Specifications

Component Type SMD Ferrite Bead / EMI Suppression Filter
Impedance 120 Ohm @ 100MHz
Tolerance –
Dielectric/Type NiZn Ferrite
Package 0603 (1608 Metric)

Features

  • 120 Ohm impedance at 100MHz for EMI suppression
  • 0603 footprint with 2.5A rated current
  • Low DC resistance for minimal voltage drop
  • TDK MMZ series for noise filtering
  • Effective suppression above 10MHz

Applications

  • Power supply line noise filtering
  • DC-DC converter output EMI suppression
  • Microcontroller power rail decoupling
  • Sensor signal line noise filtering
  • General-purpose EMI suppression
Product Introduction: MMZ1608S121ATA00 Product Introduction

The MMZ1608S121ATA00 from TDK is a 120 Ohm @ 100MHz SMD ferrite bead in a 0603 (1608 Metric) package. EMI suppression ferrite bead filter.

Working Principle: MMZ1608S121ATA00 Working Principle

The MMZ1608S121ATA00 uses a multilayer ferrite construction with NiZn (Nickel-Zinc) ceramic material. At low frequencies and DC, the device presents low resistance (primarily the DC resistance of the internal conductor), allowing signal and power currents to flow with minimal voltage drop. At high frequencies (above approximately 10MHz), the ferrite material exhibits high impedance due to the frequency-dependent increase in both inductive reactance and resistive losses. This high-frequency impedance converts EMI noise energy into heat, effectively suppressing conducted emissions on power and signal lines without requiring a ground connection for the filtering function.

Pin Description: MMZ1608S121ATA00 Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Passive Signal/power input; connect in series with filtered line
2 Terminal 2 Passive Signal/power output
Application Scenarios: In which products and applications is MMZ1608S121ATA00 used
  • Power supply line noise filtering
  • DC-DC converter output EMI suppression
  • Microcontroller power rail decoupling
  • Sensor signal line noise filtering
  • General-purpose EMI suppression
Alternative Models: What chips are recommended as replacements for MMZ1608S121ATA00
Manufacturer Part Number Package Notes
BLM18SG121SN1D Murata 0603 120R ferrite
GZ1608D121TF TDK 0603 120R
MPZ1608S121AT000 TDK 0603 120R
BLM18AG121SN1D Murata 0603 120R general

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1