Opens in a new tab

MOC3023S-TA1

Triac driver optocoupler, 5mA IFT, 400V, 5kVrms isolation, random-fire, 6-SMD

4950

Effective Inventory

Image for reference only

Manufacturer Part:

MOC3023S-TA1

Package:

6-SMD Gull-Wing (4.6 x 3.95 x 2.35 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MOC3023S-TA1 from Lite-On is a zero-crossing triac driver optocoupler in a 6-pin SMD (鸥翼) package with 5000Vrms isolation. Requiring only 5 mA LED trigger current, it drives high-voltage triacs for AC load control up to 400V, making it ideal for AC motor starters, solid-state relays, lighting dimmers, and solenoid valve control in industrial and consumer applications.

Key Specifications

Isolation Voltage 5000 Vrms (1 minute)
Peak Blocking Voltage 400V (VDRM)
LED Trigger Current (IFT) 5 mA max (MOC3023)
Forward Voltage 1.15V typ @ IF=20mA
On-State Current (Peak) 1A (PW=1ms, 120pps)
dv/dt (Critical) 1000 V/µs min
Holding Current 250 µA typ
Zero-Crossing No (random-fire)
Operating Temperature -40°C to +110°C
Package 6-SMD Gull-Wing (tape and reel)

Features

  • 5000 Vrms input-output isolation for safety
  • 5 mA maximum LED trigger current (lowest in MOC302x series)
  • 400V peak blocking voltage for direct AC line drive
  • High 1000 V/µs dv/dt immunity for noisy environments
  • Random-fire (no zero-cross) for phase-angle control
  • UL 1577, CSA, VDE, and CQC safety certifications
  • Surface-mount gull-wing package for automated assembly

Applications

  • AC motor speed control and soft starters
  • Solid-state relay (SSR) drive circuits
  • Lighting dimmer circuits (incandescent and LED)
  • Solenoid and electromagnetic valve control
  • Temperature control and heater regulation
Product Introduction: MOC3023S-TA1 Product Introduction

The Lite-On MOC3023S-TA1 is a random-fire triac driver optocoupler designed for interfacing low-voltage control circuits to high-voltage AC loads through power triacs. The device provides 5000 Vrms galvanic isolation between the LED input and the triac driver output, meeting safety requirements for AC mains-connected equipment. The MOC3023 variant features the lowest trigger current in the MOC302x series at 5 mA maximum, reducing the drive requirements from the microcontroller or logic gate. The 400V peak blocking voltage supports direct operation on 240VAC mains with appropriate safety margin. The random-fire (non-zero-crossing) output enables phase-angle control for dimming and motor speed control applications where precise firing angle control is required. The high 1000 V/µs dv/dt immunity prevents false triggering in electrically noisy industrial environments. The surface-mount gull-wing package (S suffix) with tape-and-reel packaging (TA1 suffix) enables automated SMT assembly.

Working Principle: MOC3023S-TA1 Working Principle

The MOC3023S-TA1 consists of a gallium arsenide infrared LED optically coupled to a silicon bilateral switch (diac/triac driver) in a single package. When current flows through the input LED (IF > IFT = 5 mA), the emitted infrared light illuminates the photosensitive bilateral switch, causing it to conduct and trigger the external power triac gate. The bilateral switch conducts in both directions, enabling AC triggering of the external triac regardless of the AC line polarity. The optocoupler structure provides galvanic isolation up to 5000 Vrms between the low-voltage control side (LED) and the high-voltage power side (triac driver output), meeting IEC 60747-5-2 safety requirements. The random-fire (non-zero-crossing) characteristic means the bilateral switch triggers immediately when the LED current exceeds IFT, regardless of the AC line voltage phase. This enables phase-angle control where the triac is triggered at a specific point in each AC half-cycle, varying the power delivered to the load. The high dv/dt rating (1000 V/µs minimum) ensures the bilateral switch does not falsely trigger due to rapid voltage transients on the AC line. A snubber network (R-C across the power triac) may still be required for highly inductive loads to limit dv/dt below the triac’s commutation dv/dt rating.

Pin Description: MOC3023S-TA1 Pin Definition and Functions
Pin Name Description
1 Anode LED Anode (connect via resistor to MCU/logic)
2 Cathode LED Cathode (connect to GND)
3 NC No Connect
4 Main Terminal 1 Triac Driver Output (to power triac gate)
5 NC No Connect
6 Main Terminal 2 Triac Driver Output (to AC line via resistor)
Application Scenarios: In which products and applications is MOC3023S-TA1 used
  • AC Dimmer: Random-fire output enabling phase-angle dimming of incandescent and dimmable LED lamps with MCU controlling LED trigger timing relative to AC zero-crossing
  • Solid-State Relay: Driving a power triac (e.g., BTA16) for on/off switching of 240VAC loads with 5kV isolation protecting the MCU from mains voltage
  • Motor Soft Starter: Gradually advancing the triac firing angle over multiple AC cycles to ramp up motor voltage and current, reducing mechanical stress on startup
  • Solenoid Valve: 5 mA trigger current directly drivable from 3.3V MCU GPIO through a 330-ohm series resistor, controlling water and gas solenoid valves
  • Heater Control: Phase-angle or time-proportional control of resistive heaters with 400V blocking voltage suitable for 240VAC heater elements
Alternative Models: What chips are recommended as replacements for MOC3023S-TA1
Model Brand IFT (mA) VDRM (V) Zero-Cross
MOC3021S-TA1 Lite-On 15 400 No
MOC3022S-TA1 Lite-On 10 400 No
MOC3063S-TA1 Lite-On 5 600 Yes
MOC3043M ON Semi 5 400 Yes
VOM3023TR Vishay 5 400 No

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1