Opens in a new tab

MOC3043XSM

Zero-crossing triac driver opto, 400V, 5mA IFT, 5.3kV isolation, SMDIP-6, AC load control

13529

Effective Inventory

Image for reference only

Manufacturer Part:

MOC3043XSM

Package:

SMDIP-6 (8.51 x 6.35 x 4.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MOC3043XSM from Isocom Components is a zero-crossing triac driver optocoupler in a SMDIP-6 package. With 400V peak blocking voltage and 5.3kV isolation, it provides safe AC load control interface for industrial and consumer applications.

Key Specifications

Output Type Zero-crossing triac driver
Peak Blocking Voltage 400 V
LED Trigger Current (IFT) 5 mA (max)
Isolation Voltage 5300 Vrms
Zero-Crossing Voltage 20 V (typical)
dv/dt 1500 V/us (typical)
Operating Temperature -40C to +100C

Features

  • Zero-crossing detection minimizes EMI and inrush current
  • 400V peak blocking for 240VAC mains operation
  • 5.3kVrms isolation for safe control-to-load separation
  • 5mA maximum trigger current for easy MCU drive
  • UL 1577 and VDE safety approvals
  • SMDIP-6 surface-mount package

Applications

  • Solid-state relay modules for AC load control
  • Industrial heating and temperature control
  • Motor drive and solenoid control on AC mains
  • Consumer appliance power switching
Product Introduction: MOC3043XSM Product Introduction

The MOC3043XSM from Isocom Components is a zero-crossing triac driver optocoupler in a SMDIP-6 surface-mount package. The device consists of a GaAs infrared LED optically coupled to a monolithic silicon zero-crossing bilateral triac driver. The zero-crossing detector ensures the triac only triggers when the AC mains voltage crosses zero, minimizing electromagnetic interference and inrush current to resistive loads. With 400V peak blocking voltage, the device supports 240VAC mains operation. The 5.3kVrms isolation voltage provides safe separation between low-voltage control and high-voltage load circuits. The 5mA maximum LED trigger current allows direct drive from microcontrollers. UL 1577 and IEC 60747-5-5 safety approvals ensure compliance for regulatory requirements.

Working Principle: MOC3043XSM Working Principle

The MOC3043XSM integrates an infrared LED and a zero-crossing triac driver in an optically coupled package. (1) LED Input: When forward current flows through the infrared LED (pins 1-2), it emits infrared radiation that is detected by the photosensitive triac driver on the output side. The minimum trigger current (IFT) of 5mA ensures reliable turn-on. (2) Zero-Crossing Detector: The output triac driver includes a zero-crossing detection circuit that prevents triggering when the mains voltage is far from zero. The triac can only be triggered when the mains voltage is within approximately +/-20V of zero crossing. This reduces the rate of change of load current (di/dt) and minimizes EMI. (3) Output Triac: The output triac can drive the gate of an external power triac for controlling high-current AC loads. The 400V blocking rating allows direct connection across 240VAC mains. (4) Isolation: The optical coupling provides 5.3kVrms electrical isolation between the LED input and the triac output, ensuring safety in mains-referenced circuits.

Pin Description: MOC3043XSM Pin Definition and Functions
Pin Name Type Function
1 Anode Input LED anode (connect via current-limiting resistor)
2 Cathode Input LED cathode (connect to GND)
3 NC – No connect
4 Main Term 1 Output Triac main terminal 1
5 NC/Sub – No connect (substrate, do not connect)
6 Main Term 2 Output Triac main terminal 2
Application Scenarios: In which products and applications is MOC3043XSM used
  • Solid-state relay modules for zero-crossing AC load control at 240VAC
  • Industrial heating and temperature control with EMI reduction
  • Motor drive and solenoid control on AC mains with 5.3kV isolation
  • Consumer appliance power switching with 5mA MCU-driven trigger
Alternative Models: What chips are recommended as replacements for MOC3043XSM
Manufacturer Part Number Package Notes
onsemi MOC3043M DIP-6 Through-hole equivalent
Isocom MOC3042XSM SMDIP-6 10mA IFT, same family
Vishay MOC3043S-TA1 SMD-6 Similar zero-crossing triac driver
Sharp PC814 DIP-4 Transistor output opto (not triac)

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1